if a person applies 750 n of force to move an object 10 m, and they apply this force for 5 s, what is their power output?

In conclusion, the time period of the resulting oscillatory motion is T = 2d/v, and the motion is not simple harmonic.

When the electric field is switched on, the charged block will experience a force in the direction of the electric field, i.e., towards the right. This force will cause the block to move towards the wall. If the block collides elastically with the wall, it will rebound with the same speed but in the opposite direction.

Let the velocity of the block just before collision with the wall be v. The time taken by the block to travel a distance d to reach the wall is given by t = d/v. The time taken by the block to return to its initial position is also t, as the block moves with the same speed v during the rebound. Therefore, the time period of the oscillatory motion is T = 2t = 2d/v.

Now, let's analyze whether the motion is simple harmonic or not. For simple harmonic motion, the restoring force should be proportional to the displacement from the equilibrium position and should be directed towards the equilibrium position. In this case, the restoring force is provided by the electric field, which is always directed towards the right. Therefore, the motion is not simple harmonic as the restoring force is not proportional to the displacement from the equilibrium position.

In conclusion, the time period of the resulting oscillatory motion is T = 2d/v, and the motion is not simple harmonic.

Learn more about simple harmonic.

https://brainly.com/question/28208332

#SPJ4

Under the circumstances, a balloon with a volume of 0.035 m³ could be filled from the helium gas tank.

At an altitude of 1000 metres, where the atmospheric pressure is measured to be 60.8 kPa, a weather balloon with a 2000-liter volume and a pressure of 96.3 kPa ascends.

PV = nRT

n = PV/RT = (15.5x10⁶ Pa x 0.020 m³) / (8.31 J/K/mol x 293 K) = 0.0148 mol

Next, we can use the ideal gas law again to find the new volume of the helium at the given conditions:

(P1V1)/T1 = (P2V2)/T2

We can solve for V2:

V2 = (P1V1T2)/(P2T1) = (15.5x10⁵ Pa x 0.020 m³ x 323 K)/(1 atm x 293 K) = 0.035 m³

To know more about circumstances visit:-

https://brainly.com/question/30499166

#SPJ1

The smallest aperture (diameter) telescope that will just resolve the two stars is 5 cm.

The angular resolution (minimum resolvable angle) of a telescope can be calculated using the Rayleigh criterion, which states that two objects can be just resolved when the center of the diffraction pattern of one is directly over the first minimum of the diffraction pattern of the other. The formula for the angular resolution is:

where θ is the angular resolution, λ is the wavelength of light, and D is the diameter of the aperture (telescope).

Substituting the given values, we get:

The angular separation between the stars is given as 10-5 radians. To resolve the stars, the angular resolution of the telescope must be equal to or smaller than this value. Therefore:

Therefore, the smallest aperture (diameter) telescope that will just resolve the two stars is 5 cm.

To learn more about telescope, here

https://brainly.com/question/556195

#SPJ4

(a) The weight of the girl on Earth is  548.8 N

(b) The girl would weigh approximately 137.2 N on the tower at a height equivalent to the radius of the Earth.

a) The weight of the girl on Earth can be calculated using the formula for gravitational force:

Weight = mass × acceleration due to gravity

The acceleration due to gravity on Earth is approximately 9.8 m/s^2.

Given that the mass of the girl is 56 kg, her weight on Earth would be:

Weight = 56 kg × 9.8 m/s^2 = 548.8 N (Newtons)

b) If the girl were standing on a tower that is as high as the radius of the Earth, she would be at the height of the Earth's orbit.

Assuming the girl is at a height equivalent to the radius of the Earth, which is approximately 6,371 km, the acceleration due to gravity would be significantly lower.

Let's assume it's approximately 1/4 of the surface gravity, which is a rough estimate.

Acceleration due to gravity at height of radius of Earth = 9.8 m/s^2 ÷ 4 = 2.45 m/s^2

Using this lower acceleration due to gravity, the girl's weight on the tower would be:

Weight = mass × acceleration due to gravity at height

Weight = 56 kg × 2.45 m/s^2 = 137.2 N (Newtons)

Learn more about weight here:  https://brainly.com/question/2337612

#SPJ1

The buoyant force on a 1-kilogram helium-filled balloon will be considerably more than the buoyant force of the atmosphere on a 1-kilogram iron block.

The buoyant force is the force exerted by a fluid, such as air or water, on an object that is submerged in it. It is equal to the weight of the fluid displaced by the object.

In this case, we are comparing the buoyant force of the atmosphere on a 1-kilogram iron block to the buoyant force on a nearby 1-kilogram helium-filled balloon.

Helium is a gas that is much less dense than air, which means that it will displace a larger volume of air than the iron block of the same mass.

Therefore, the buoyant force on the helium-filled balloon will be considerably more than the buoyant force on the iron block. This is because the buoyant force is directly proportional to the volume of fluid displaced by the object.

To learn more about : buoyant

https://brainly.com/question/28464280

#SPJ11

In a parallel resistor circuit, the current through one resistor is not always the same as the current in the other resistors in the circuit. The correct answer is: d.

In a parallel resistor circuit, the current is split between the different branches of the circuit. The total current in the circuit is equal to the sum of the currents in each branch. Each resistor in a parallel circuit has a different resistance, which determines how much current flows through it. The resistor with the lowest resistance will have the highest current flowing through it, while the resistor with the highest resistance will have the lowest current flowing through it. Therefore, option d is correct.

To know more about parallel resistor circuit, here

brainly.com/question/29006457

#SPJ4

photoelectrons from metal 1 have a higher speed, a lower speed, or the same speed as photoelectrons from metal 2, If the kinetic energy of photoelectrons from metal 1 is higher than that of metal 2, then the photoelectrons from metal 1 have a higher speed. If the kinetic energy is lower, they have a lower speed. If the kinetic energies are equal, the photoelectrons have the same speed.

we need to consider the following steps:

1. Determine the work function of both metals (the minimum energy required to release an electron from the metal surface). The work function is specific to each metal.
2. Identify the energy of the incident light, which should be the same for both metals to make a fair comparison.
3. Use the photoelectric effect equation: Kinetic energy of photoelectrons = Energy of incident light - Work function of the metal.
4. Compare the kinetic energy of the photoelectrons from both metals.

If the kinetic energy of photoelectrons from metal 1 is higher than that of metal 2, then the photoelectrons from metal 1 have a higher speed. If the kinetic energy is lower, they have a lower speed. If the kinetic energies are equal, the photoelectrons have the same speed.

Learn more about photoelectrons at  brainly.com/question/16772624

#SPJ11

A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s it takes 8 sec to speed up.

For more information on time of roller coaster kindly visit to

https://brainly.com/question/18002471

#SPJ1

The student's claim is incorrect. According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction.

In this case, the force exerted by the astronaut on her feet is equal and opposite to the force exerted by the feet on the astronaut. Therefore, moving her feet in the opposite direction to each other will result in equal and opposite forces, which will cancel each other out and not propel the astronaut towards the space station.

To propel herself towards the space station, the astronaut needs to exert a force in the direction opposite to the direction of the space station. This can be achieved by using a jetpack or another propulsion system.

Find out more on space station here: https://brainly.com/question/18650677

#SPJ1

The maximum EMF induced in the coil by the Earth's magnetic field is zero.

We can use Faraday's law of electromagnetic induction to calculate the maximum EMF induced in the coil by the Earth's magnetic field. Faraday's law states that the EMF induced in a coil is equal to the rate of change of the magnetic flux through the coil.

Assuming the loop is a circle of radius r, the magnetic flux through the loop due to the Earth's magnetic field is given by:

Φ = B * A * cosθ

where B is the horizontal component of the Earth's magnetic field, A is the area of the loop, and θ is the angle between the normal to the loop and the direction of the magnetic field. Since the loop is lying flat on the ground, θ = 0, and cosθ = 1.

The area of a circle is A = π[tex]r^2[/tex], so we have:

Φ = B * π[tex]r^2[/tex]

The rate of change of the magnetic flux through the loop is given by the time derivative of Φ:

dΦ/dt = d(B * π[tex]r^2[/tex])/dt = π[tex]r^2[/tex] * dB/dt

Since the horizontal component of the Earth's magnetic field is constant, dB/dt = 0, so the rate of change of the magnetic flux is zero.

Therefore, the maximum EMF induced in the coil by the Earth's magnetic field is zero.

Learn more about magnetic field

https://brainly.com/question/14848188

#SPJ4

The energy gap is about 8 kilocalories per pound of lost weight. bill has just lost 25 pounds, so he needs 200 fewer kilocalories per day to maintain his weight loss.

When someone loses weight, their body requires fewer calories to maintain their new weight. This is because the body has less mass to maintain, and therefore requires less energy to do so.

The amount of energy saved per pound of weight loss is referred to as the energy gap. In this case, the energy gap is 8 kilocalories per pound of lost weight. This means that for every pound of weight lost, the body requires 8 fewer kilocalories per day to maintain that weight loss.

If Bill has just lost 25 pounds, then he would need to consume 8 x 25 = 200 fewer kilocalories per day to maintain his weight loss compared to what he needed before his weight loss.

To know more about weight, here

brainly.com/question/10069252

#SPJ4

The values you mentioned are related to the motion of a typical object near the surface of the Earth.

The acceleration due to gravity, represented by "g", is approximately 9.8 [tex]m/s^2[/tex] at sea level. This value is constant and acts vertically downward, so it's common to see it represented as a negative value in equations. If an object is at rest on a level surface, then its acceleration in the x and y directions should be close to zero. This is because the object is not moving in those directions, so it's not accelerating.

Regarding the gyroscope values, a gyroscope is a device that measures angular velocity or rotation rate. If a gyroscope is at rest or is not undergoing any rotation, its output should be zero. This is because there is no change in angular velocity to measure. So, if all three gyroscope values are essentially zero, it suggests that the device is not rotating or undergoing any significant angular velocity changes.

In summary, the values you mentioned are related to the motion of objects on or near the Earth's surface, and their values reflect the physical laws that govern that motion.

Learn more about gyroscope

https://brainly.com/question/30214363

#SPJ4

The electric field 2 cm away from an infinite line of charge will be less than the electric field 1 cm away.

The electric field follows an inverse square law, which means that the strength of the electric field decreases as the distance from the charge increases. Specifically, the electric field at a distance r from an infinite line of charge with charge density λ is given by:

E = λ / (2πε₀r)

where ε₀ is the permittivity of free space. Therefore, if r doubles from 1 cm to 2 cm, the electric field will decrease by a factor of 2π.

More on charge: https://brainly.com/question/29291836

#SPJ11

1.43 Nm is the torque needed to accelerate the wheel from rest to 1950 rpm in 5.00 s. take into report a frictional torque that has been calculated to slow down the wheel from 1500 rpm to rest in 55.0 s

Speed of wheel = 1950 rpm

Time is taken to accelerate =  5.00 s

Speed of wheel to slowdown =  1500 rpm

Time taken to rest =55.0 s

To calculate the torque needed to accelerate the wheel:

τ = Iα

To calculate the angular acceleration:

α = Δω / Δt

the change in angular velocity is calculated by using the formula:

Δω = ωf - ωi

At initial the velocity is Zero.

ωf = 1950 rpm

ωf = 1950 rev/min = 1950/60 rad/s

ωf = 32.5 rad/s

The angular acceleration is:

α = Δω / Δt = (32.5 rad/s)  ÷ 5.00

α =  6.50 rad/s^2

To calculate the moment of inertia,

I = (1/2)MR^2

The final speed of the wheel is 1950 rpm, which corresponds to a linear speed of:

v = ωf R = (1950/60 rev/s) ÷ (2π R)

v  = 204.2 R m/s

To calculate the circumference,

C = 41.67 * (2π R)

C = 83.34 π R

The linear distance traveled during this time is:

d = v t = (204.2 R m/s) (55.0 s)

d = 11,231 R m

to calculate the radius of wheels:

83.34 π R = 11,231 R m

R = 42.7 m

V = π R^2 h

V =[tex]3.14 * (0.427 m)^2 *(0.02 m)[/tex]

V = 0.000574 m

The mass is:

M = V ρ = [tex](0.000574 m^3) (7.8 g/cm^3) (1000 cm^3/m^3)[/tex]

M = 4.49 kg

Now we can calculate the torque needed to accelerate the wheel using the formula:

τ = Iα = (1/2)MR^2 α

τ = [tex](1/2) (4.49 kg) (0.427 m)^2 (6.50 rad/s^2)[/tex]

τ = 1.43 Nm

Therefore, we can conclude that the applied torque needed is 1.43 Nm.

To learn more about Torque

https://brainly.com/question/30499052

#SPJ4

Acid precipitation is caused by the burning of fossil fuels, which releases sulfur dioxide and nitrogen oxides into the atmosphere. The correct option is a) the burning of fossil fuels.

Released into the atmosphere, sulphur dioxide and nitrogen oxides react with water, oxygen, and other elements to produce sulfuric acid and nitric acid, respectively. Acid-impacted rain often has a pH that is below 4.5.

Nitrogen oxides are released into the atmosphere during the burning of fossil fuels and contribute to the formation of smog and acid rain.

To know more about atmosphere visit:-

https://brainly.com/question/29888742

#SPJ1

The detector must be placed at an angle of approximately 0.003 degrees relative to the direction of the incoming photon to detect the scattered photon.

This formula relates the change in wavelength of the scattered photon to the scattering angle and the rest mass of electron.

Δλ = h/mc (1 - cosθ)

Rearranging the formula to solve for θ, we get:

cosθ = 1 - (Δλ mc)/h

Plugging in the given values, we get:

cos\theta = 1 - [(1.7 * 10^{-4} nm) * (9.11 * 10^{-31} kg) * (3 * 10^{8} m/s)] / \\(6.626 * 10^{-34} J.s)

cosθ ≈ 0.999996

θ ≈ 0.003 degrees

To know more about wavelength, here

brainly.com/question/31143857

#SPJ4

If successful, Leibniz's argument, also known as the Cosmological Argument, does aim to prove the existence of a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe. The statement is true.

Leibniz's cosmological argument, also known as the Principle of Sufficient Reason, aims to demonstrate that there must be a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe. According to the argument, every contingent thing in the universe has an explanation for its existence, and this explanation must ultimately rest on a necessary being that exists by its own nature and does not depend on anything else for its existence. This necessary being, by definition, must possess the attributes mentioned above. Therefore, if the argument is successful, it would indeed prove the existence of a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe.

To learn more about Cosmological Argument, refer:-

https://brainly.com/question/30027032

#SPJ11

Answer: Changing state from a liquid to a solid

Explanation: When liquid water loses thermal energy, it gets cold and undergoes freezing.

The momentum of the ball is approximately 0.00045 g m/s.

the momentum of the train car is 1000 kg m/s.

False. The momentum of an object depends on both its mass and velocity

True. If two objects have the same velocity, their momenta will be the same as long as their masses are equal.

False. The truck moving at 20 m/s will have a much larger momentum than a bicycle moving at 20 m/s

The momentum (p) of an object is defined as the product of its mass (m) and velocity (v), so we can use the formula p = m*v to solve the problems:

The momentum of a ball with a mass of 0.15 mg (0.00015 g) moving at 3 m/s is:

p = mv = (0.00015 g)(3 m/s) = 0.00045 g m/s.

So, the momentum of the ball is approximately 0.00045 g m/s.

The momentum of a train car with a mass of 250 kg moving at 4 m/s is:

p = mv = (250 kg)(4 m/s) = 1000 kg m/s.

So, the momentum of the train car is 1000 kg m/s.

False. The momentum of an object depends on both its mass and velocity, so two objects with different masses will have different momenta even if they have the same velocity.

True. If two objects have the same velocity, their momenta will be the same as long as their masses are equal.

False. The momentum of an object depends on both its mass and velocity, so a truck moving at 20 m/s will have a much larger momentum than a bicycle moving at 20 m/s, since the truck has much more mass.

Learn more about momentum at

https://brainly.com/question/1042017

#SPJ1

To calculate the minimum force required to open a jar using a jar wrench, we need to consider the torque required to overcome the friction between the lid and the jar.

The torque required to open a jar can be calculated using the formula:

Torque = Force x Distance

where Force is the minimum force required to open the jar, and Distance is the distance between the center of the jar and the point where the force is applied (in this case, the distance between the center of the jar and the end of the jar wrench handle, which is 19 cm).

The minimum force required to open the jar can be calculated by dividing the torque required by the radius of the lid.

Let's assume that the radius of the lid is 4 cm.

So, the minimum force required to open the jar is:

Force = Torque / Radius of the lid

To calculate the torque required, we need to estimate the force of friction between the lid and the jar. Let's assume that the force of friction is 0.2 times the weight of the jar, which is the typical range for a well-sealed jar.

So, the torque required to open the jar is:

Torque = Force of friction x Distance

Torque = 0.2 x Weight of the jar x Distance

Let's assume that the weight of the jar is 500 grams, which is equivalent to 4.9 N (Newtons), and the distance between the center of the jar and the end of the jar wrench handle is 19 cm.

So, the torque required to open the jar is:

Torque = 0.2 x 4.9 N x 19 cm

Torque = 1.86 N-cm

Now we can calculate the minimum force required to open the jar:

Force = Torque / Radius of the lid

Force = 1.86 N-cm / 4 cm

Force = 0.47 N

Therefore, the minimum force required to open the jar using a jar wrench with a handle that extends 19 cm from the center of the jar is approximately 0.47 N.

To know more about minimum force :

https://brainly.com/question/4580699
#SPJ11

The center of mass velocity after the perfectly inelastic collision is Vf = v/3.

To determine the center of mass velocity after the perfectly inelastic collision between the father and daughter on frictionless ice with no wind resistance.

Step 1: Assign variables to the given information.
Let the mass of the father be 2m and the mass of the daughter be m. The daughter approaches the father with a speed of v, and the father is initially at rest.

Step 2: Apply the conservation of momentum principle.
In a collision, the total momentum before the collision equals the total momentum after the collision. Let Vf represent the final velocity of both the father and daughter after the collision. The initial momentum is given by:

p_initial = (mass_daughter × v_daughter) + (mass_father × v_father)

Since the father is initially at rest, his initial velocity is 0:

p_initial = (m × v) + (2m × 0) = m × v

Step 3: Calculate the total momentum after the collision.
After the collision, the combined mass of the father and daughter is 2m + m = 3m. The final momentum is:

p_final = (mass_combined) × Vf = (3m) × Vf

Step 4: Set the initial momentum equal to the final momentum and solve for the final velocity, Vf.
m × v = (3m) × Vf

Divide both sides by 3m:

Vf = (m × v) / (3m)

The mass m cancels out:

Vf = v / 3

You can learn more about the center of mass at: brainly.com/question/29576405

#SPJ11

True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.

Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.

Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions

To know more about organism visit:

https://brainly.com/question/13278945

#SPJ1

The energy transformation that occurs in this scenario is gravitational potential energy being converted to kinetic energy.

The ball in its initial state has gravitational potential energy due to its position high on top of the cliff.  As the ball falls, this potential energy is transformed into kinetic energy, which is the energy of motion. By the time the ball is just about to hit the ground, it has lost all of its potential energy and gained an equal amount of kinetic energy.

1. Initially, the ball has potential energy due to its height on the cliff. This is gravitational potential energy, calculated as PE = m * g * h, where m is the mass of the ball, g is the gravitational constant (9.81 m/s²), and h is the height of the cliff.

2. As the ball starts to fall, the gravitational potential energy is gradually converted into kinetic energy. Kinetic energy is the energy of motion, calculated as KE = 0.5 * m * v², where m is the mass of the ball, and v is its velocity.

3. Throughout the fall, the conservation of mechanical energy states that the total energy in the system remains constant. So, the sum of potential energy and kinetic energy at any point in the fall is equal to the initial potential energy (PE_initial = PE + KE).

4. Just before the ball hits the ground, its height (h) is approximately zero. Therefore, the potential energy is almost zero, and most of the initial potential energy has been converted into kinetic energy.

In summary, the energy transformation in this scenario involves the conversion of gravitational potential energy into kinetic energy as the ball falls from the cliff and gains speed before hitting the ground.

More on energy transformation: https://brainly.com/question/29102331

#SPJ11

The baton's rotational kinetic energy is 2.5 Joules (J)

To calculate the baton's rotational kinetic energy, we need to know its moment of inertia and angular velocity. Let's assume that the baton has a moment of inertia of 0.05 kg*m² and an angular velocity of 10 radians per second. Using the formula for rotational kinetic energy, KE = (1/2)Iω², where I is the moment of inertia and ω is the angular velocity, we can calculate:

KE = (1/2) * 0.05 kg*m² * (10 rad/s)² = 2.5 J

Therefore,  2.5 Joules (J) is the baton's rotational kinetic energy, expressed to two significant figures.

More on baton's rotational kinetic energy: https://brainly.com/question/31391873

#SPJ11

The quantity that is expressed as the product of moment of inertia and angular velocity is known as angular momentum.

Angular momentum is a vector quantity and is measured in units of mass times units of velocity, which is equivalent to kilogram-meters squared per second in SI units. It represents the rotational analog of linear momentum and is important in understanding the conservation of angular momentum in rotating systems.
The concept of angular momentum, which involves moment of inertia and angular velocity. Angular momentum (L) is the product of an object's moment of inertia (I) and its angular velocity (ω). It can be represented mathematically as:
L = I * ω
To know more about moment of inertia:

https://brainly.com/question/30051108

#SPJ11

The moment of inertia times angular velocity is a measure of rotational motion and is expressed as the ˘ of the moment of inertia and the angular velocity. The units of velocity are typically meters per second (m/s) or radians per second (rad/s), depending on the context.

The units of moment of inertia are kilograms times meters squared (kg x m²). When these units are multiplied together, the resulting unit is kilogram-meters squared per second (kg x m²/s), which is the SI unit for angular momentum. Since angular momentum is a vector quantity, it has both magnitude and direction.

I is the moment of inertia, a measure of an object's resistance to rotational motion, and is typically determined by the object's mass distribution and geometry.

ω is the angular velocity, a measure of how fast an object rotates about a specific axis, and is typically expressed in radians per second (rad/s).

To learn more about Angular velocity Here:

https://brainly.com/question/29557272

#SPJ11

Radio waves are diffracted by large objects such as buildings, whereas light is not noticeably diffracted, because b) the wavelength of light is much smaller than the wavelength of radio waves.

The diffraction is the bending of waves around obstacles or through small openings, and the amount of diffraction is proportional to the size of the obstacle or opening and the wavelength of the wave. Since radio waves have much longer wavelengths than visible light, they are more easily diffracted by large objects such as buildings. On the other hand, visible light has a much smaller wavelength than radio waves, which makes it less prone to diffraction. Polarization and coherence are not directly related to diffraction.

Polarization refers to the direction of oscillation of the electromagnetic waves, while coherence refers to the consistency of phase between waves. Therefore, the correct answer is b) the wavelength of light is much smaller than the wavelength of radio waves. Radio waves are diffracted by large objects such as buildings, whereas light is not noticeably diffracted, because b) the wavelength of light is much smaller than the wavelength of radio waves.

Learn more about polarization at:

https://brainly.com/question/29217577

#SPJ11

The type of spectrum being referred to is an absorption spectrum. Here are the steps involved in creating an absorption spectrum:

1) A radiation source emits a continuous spectrum of light, which contains all wavelengths of visible light.

2) The light from the radiation source passes through a material, such as a gas, liquid, or solid.

3) The material absorbs certain wavelengths of light that are specific to its chemical composition.

These absorbed wavelengths correspond to the energy levels of the electrons in the material's atoms or molecules.

4) The remaining light that passes through the material is a spectrum that has dark bands or lines where the absorbed wavelengths should be. These dark bands represent the wavelengths that were absorbed by the material.

5) The resulting spectrum is an absorption spectrum that can be used to identify the elements or compounds present in the material.

To summarize, an absorption spectrum contains dark bands that correspond to the specific wavelengths of light that are absorbed by a material between a radiation source and the earth. By analyzing the absorption spectrum, scientists can identify the composition of the material.

To know more about absorption spectrum :

https://brainly.com/question/14282264

#SPJ11

The tension on the rope allowing the box to accelerate downward at 4.00 m/s² is 43.5 N.

To find the tension on the rope, we need to use the equation for the net force acting on the box:

F_net = ma

where F_net is the net force, m is the mass of the box, and a is the acceleration of the box. The box is accelerating downward at 4.00 m/s², so we can substitute in the values:

F_net = (7.50 kg)(4.00 m/s²) = 30.0 N

The tension on the rope is equal in magnitude but opposite in direction to the weight of the box. We can find the weight of the box using the equation:

F_weight = mg

where F_weight is the weight, m is the mass of the box, and g is the acceleration due to gravity (9.81 m/s²).

F_weight = (7.50 kg)(9.81 m/s²) = 73.6 N

Therefore, the tension on the rope is:

Tension = F_weight - F_net = 73.6 N - 30.0 N = 43.6 N

So, the tension on the rope allowing the box to accelerate downward at 4.00 m/s² is 43.5 N.

To know more about the Tension, here

https://brainly.com/question/14837273

#SPJ1

The resistance r of the resistor which is placed in series with a 130-w lamp and a 120 V source is 21.66 Ω

According to the question,

Power of the lamp = 130 W

The voltage of the source = 120 V

The voltage across the lamp = 32 V

According to Kirchow's voltage Law,

The algebraic sum of voltage in a closed loop is zero.

So ∑V = [tex]V_{resistor}+V_{lamp}+V_{source}[/tex] =0

[tex]V_{Lamp}=-32 V[/tex]

[tex]V_{source}=120V[/tex]

0 = 120 - 32 + [tex]V_{resistor}[/tex]

[tex]V_{resistor}[/tex] = -88 V

Power of the lamp = V * I

130 = 32 * I

I = [tex]\frac{130}{32} A[/tex]

According to Ohm's Law,

V ∝ I

V = I*R

where V is the potential difference across the resistor

I is the current flowing through the resistor

R is the resistance of the resistor

Since the lamp and resistor are connected in series, they have the same amount of current flowing

Therefore, 88 = [tex]\frac{130}{32}[/tex] * r

r = [tex]\frac{88*32}{130}[/tex]

r = 21.66 Ω

Learn more about Ohm's Law:

https://brainly.com/question/19892453

#SPJ4

Convex Lens:- A long focal length lens that magnifies the subject and narrows the field of view is called a convex lens.

However, it's important to note that lenses can also be concave, which will have the opposite effect of a convex lens, causing the subject to appear smaller and the field of view to appear wider. And the lenses will change their nature if kept in a denser medium than them.

Convex lenses are used in eyeglasses for correcting farsightedness, where the distance between the eye's lens and retina is too short, as a result of which the focal point lies behind the retina. Eyeglasses with convex lenses increase refraction and accordingly, reduce the focal length.

To know more about lenses, click on this -

brainly.com/question/29834071

#SPJ11

A long focal length lens that magnifies the subject and narrows the field of view is called a telephoto lens.

A zooming focal point is a sort of camera focal point with a long central length that amplifies the subject and limits the field of view. Dissimilar to a customary focal point, a zooming focal point can amplify an article or a subject without genuinely drawing nearer to it, making it valuable for catching far off items or untamed life. Zooming focal points are usually utilized in sports and natural life photography, where the photographic artist needs to catch a subject from a good ways.

Because of their long central length, zooming focal points can likewise deliver a shallow profundity of field, obscuring the foundation and making the subject stick out. Notwithstanding, zooming focal points are frequently heavier and more costly than standard focal points, making them less pragmatic for ordinary use.

To learn more about telephoto lens, refer:

https://brainly.com/question/28806665

#SPJ4