Lesson : LIGHT
Answer the following questions on the basis of given ray diagram.
1. Name the rays A and B.
2. Which ray has more speed ( A or B ) in the glass medium ?
3. Which phenomenon is shown in the given diagram ?
4. Ray B is bending more than the ray A. What is the reason behind it ?

~Thanks in advance! <3

Lesson : LIGHTAnswer The Following Questions On The Basis Of Given Ray Diagram. 1. Name The Rays A And

Answers

Answer 1

Answer:

Explanation:

1. Both are refracted light.

2. B has more speed.

3. Dispersion

4. Lights of different wavelengths have different speed in prism. It causes the lights to refract at different angle; forming a color spectrum.


Related Questions

The reason Senators are in office for 6 years is...

No links pls or I’m reporting you :)

1) To separate Senators from the whims of the
general public.

2) to save money in elections

3) Because Senators are required to be older
than representatives

Answers

I think it’s answer 1 to separate senators fr om the whims or the general public

We can use energy principles to make ____ predictions.

Answers

Compatible and speedy

Which event occurs during high tide?

All of Earth’s ocean levels rise.
The moon’s orbit is closer to Earth.
The gravity of the Sun and moon cause the Earth’s crust and water to bulge.
Earth’s crust and water are being pulled in opposite directions by the Sun and moon.

Answers

Answer:

(B) The moon’s orbit is closer to Earth.

Explanation:

Answer:

B

Explanation:

What do waves transfer? Question 1 options: matter energy water particles

Answers

Waves transfer energy over distance without moving matter the entire distance. So your answer would be energy.

What force is caused by tiny collisions, called microwelds, on surfaces that
are stuck together?
A. heat
B. energy
C. air resistance
D. friction

Answers

Answer:

D. Friction

Explanation:

"Friction is caused by microwelds that form between two surfaces. Microwelds are stronger when the two surfaces are pushed together with a greater force." - ( Module 3 • Forces and Newton’s Laws) quoted

hope this helps and is right. p.s. i really need brainliest :)

Answer:

Friction

Explanation:

Took The Test

Which has a higher momentum, a 3.5kg bowling ball that is rolling at 30
m/s or a 50 kg student moving at 1.75 m/s?

Answers

Answer:

The answer of this question

Explanation:

a3.5 kg blowing ball that is rolling at 30 m/s

30 kg sits on a table the acceleration due to gravity is 10 m/s^2 what force does the table exert on the television.
0.3N
3N
300N
600N

Answers

Answer:

300N

Explanation:

F=m×a

F=30kg×10m/s^2

F=300N

If 30 kilograms sit on a table the acceleration due to gravity is 10 meters/second², then the force exerted by the table on the television would be 300 Newtons,

Therefore the correct answer is option C.

What is acceleration?

The rate of change of the velocity with respect to time is known as the acceleration of the object.

As given in the problem If 30 kilograms sit on a table the acceleration due to gravity is 10 meters/second²,

the force exerted = mass × acceleration due to gravity

                       = 30 kilograms ×  10 meters/second²

                       = 300 Newtons

Thus, the force exerted by the table on the television would be 300 Newtons,

To learn more about acceleration from here, refer to the link;

brainly.com/question/2303856

#SPJ2

True or false? In a linear relationship, a change in one variable will always result in a change of the
same size in the other variable.

Answers

The statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

What is a linear relationship?

A linear relationship is a type of association between two variables where a change in one produces a direct modification in the another one.

A linear relationship may change depending on the rate of change and therefore the size of this variation is not the same.

In conclusion, the statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

Learn more about linear relationships here:

https://brainly.com/question/6691346

#SPJ1

A complete, unbroken path through which electric charges can flow is a(n)
a.
electric circuit.
b.
electrical resistance.
c.
magnetic field line.
d.
magnetic pole.

Answers

Answer:

a.

electric circuit.

Explanation:

A path through which electric charges flow. A continuous, unbroken path through which electrons can flow is a closed circuit. Charges, or current, can flow only through a closed circuit. A break or opening in a circuit creates an open circuit.

Answer:

The answer would be A

Explanation:

An electric circuit.

Hope this helped!

"No one's like me, I'm Harley frickin' Quinn"!

-Harley Quinn (Birds of Prey)

The density of red wood is 15.27 g/cm'. A piece of red wood has the volume of 18.721 cm', what is the
mass?

Answers

The mass is 285.86967 GIV BRAINDEADLIEST

You drive a car for 2.0 h at 60 km/h, then for another 3.0 h at 85 km/h. What is your average velocity

Answers

Answer:

Explanation:

Average velocity is found in the total displacement experienced in the trip divided by the total time it took to make this trip. If, for the first 2.0 hours, the car travels at 60 km/hr, then in 2.0 hours the car can travel 120 km; if it then travels for 3.0 at 85 km/hr, it can travel 255 km in the same direction. The total time this took was 5.0 hours. So doing the math and rounding correctly by following the rules for the adding and subtracting of sig fig's:

[tex]v=\frac{120+255}{5.0}=\frac{380}{5.0}=76\frac{km}{hr}[/tex]

If you do not round when you add, the average velocity is 75 km/hr

which statement identifies a reason to preserves wetlands

Answers

Answer:

They store floodwater

Explanation:

Utility companies charge by the kilowatt-hour. The number of kilowatt-hours used equals the number of kilowatts multiplied by the number of hours an electrical device was used. How long would it take for a 50-watt fan to use 1 kilowatt-hour of electricity? (Hint: 50 watts = 0.05 kilowatts.)

Answers

Answer:

t = 3 minutes

Explanation:

Given that,

Power of fan, P = 50 W

Energy used, E = 1 kWh

We know that,

Energy = Power/time

As, 50 watts = 0.05 kilowatts

So,

[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]

or

t = 3 min

So, the required time is equal to 3 minutes.

A 905 kg test car travels around a 3.25 km circular track. if the magnitude of the force that maintains the car's circular motion is 2140 N, what is the car's tangential speed?

Answers

Link provided in other answer is a SCAM, don’t click on the link !!!!

You have two photos of a person walking. One shows the person at the corner of Third and Main streets, the other shows the person at the corner of Tenth and Main streets. There are lampposts at every corner in this town, and the first picture shows it to be 10:32:00 exactly. The second picture shows it to be 10:49:30. You know three facts: (1) All of the clocks are synchronized; (2) there are exactly 12 equal-sized blocks per kilometer in this town; and (3) the streets that cross Main in this area are numbered consecutively, with no interruptions. What is the person’s average speed in kilometers per hour?

Answers

Answer:

average speed

= [(10-3)/12 km] / [(49.5-32.0)/60 hour]

= 5*7 / 17.5

= 2 km/h .

HURRY URGENT ASAP I WILL GIVE BRAINLIEST

What does mutate mean?

a)Change the DNA of your cells
b) Kill your DNA
c)Kill your cell
d)Change the cell

Answers

Answer:

A

Explanation:


Question 1
1 pts
What measures the amount of current flowing through a wire?
A.voltage
B. ampere
C. watt

Answers

B. Ampere

Is ur answer

ampere is the right answer.

5. What is the frequency of a sound wave when the speed of the sound is 340 m/s and has a wavelength of 1.21 m?​

Answers

Explanation:

v = f × /\

340 = 1.21f

f = 280.99Hz

3.Three resistors of 25.0Ω, 30.0Ω, and 40.0Ω are in a series circuit with a 6.0-volt battery. What is the current in the circuit?

please answer by steps

Answers

Answer:

Current = 0.063 Amperes

Explanation:

Let the three resistors be R1, R2, and R3 respectively.

Given the following data;

R1 = 25.0Ω,

R2 = 30.0Ω

R3 = 40.0Ω

Voltage = 6 Volts

First of all, we would determine the equivalent or total resistance;

Total resistance (in series) = R1 + R2 + R3

Total resistance = 25.0Ω + 30.0Ω + 40.0Ω

Total resistance = 95 Ω

Next, we find the current flowing through the circuit;

Voltage = current * resistance

Substituting into the formula, we have;

6 = current * 95

Current = 6/95

Current = 0.063 Amperes

Una barra de plata de 335.2 g con una temperatura de 100 ºC se introduce un calorímetro de aluminio de 60 g de masa que contiene 450 g de agua a 23 ºC. Sr agita la mezcla y la temperatura se incrementa hasta 26 ºC. ¿Cuál es el calor especifico de la plata?

Answers

Respuesta:

0,0560 cal / gºC.

Explicación:

Cantidad de calor; (Q)

Q = mcΔt; Δt = t2 - t1

m = masa, c = capacidad calorífica específica; Δt = cambio de temperatura

c de agua = 1 cal / gºC

c de aluminio = 0,22 cal / gºC

QTotal = Q de agua + Q de aluminio

Q de agua = 450 * 1 * (26 - 23) = 1350 cal

Q de aluminio = 60 * 0.22 * (26 - 23) = 39.6 cal

QTotal = 1350 + 39,6 = 1389,6 cal

Calor perdido = calor ganado

QTotal = calor perdido

- 1389,6 = 335,2 * c * (26 - 100)

-1389,6 = −24804,8 * c

c = 1389,6 / 24804,8

c = 0,056021 cal / gºC.

Capacidad calorífica específica de la plata = 0,0560 cal / gºC.

4. Anaerobic exercise helps type 2 diabetes.
a. True
b. False

Answers

Answer:

true

Explanation:

b/c anaerobic exercis helps type 2 diabetes

A person invested
$
8
,
900
$8,900 in an account growing at a rate allowing the money to double every 7 years. How long, to the nearest tenth of a year would it take for the value of the account to reach
$
20
,
600
$20,600?

Answers

Answer:

8.5

Explanation:

To the nearest tenth of a year, it would take around 9.1 years when calculate compoundly for the account's worth to reach $20,600.

What is Compound interest?

A loan or investment's initial principal as well as any accrued interest from earlier periods are both taken into account when calculating compound interest.

To resolve this issue, we can apply the compound interest formula:

A = P(1 + r/n)nt

where:

A represents the balance of the account after t years.P stands for the initial outlay ($8,900 in this case).The annual interest rate is r, which is unknown.The number n determines how often interest is compounded each year (in this case, once every seven years because the value of the money doubles every seven years).The number of years is t.

When A = $20,600, we need to determine t. Since we are aware that the initial investment would double after seven years, we can use the following formula to determine the yearly interest rate:

2 = (1 + r/n)^(nt)

If n is 1/7 (since the investment twice once every 7 years), 2 is the factor by which the investment doubles, and t is an unknown.

When we simplify this equation, we obtain:

t log(1 + r/7) = log(2)

When we solve for r, we get:

r = 7[(2^(1/t))-1]

Now that we have P, r, n, and A, we can enter them into the compound interest formula to find t:

$20,600 = $8,900(1 + r/1)^(1t)

2.318 = (1 + r)^t = log (2.318) / log (one plus r)

t is equal to log(2.318)/log(1 + 7[(2(1/t))-1]).

We can iteratively solve for t using a calculator, beginning with a first guess of 7 years (because the investment doubles every 7 years):

r = 0.0998 and A = $17,800 for t = 7 years

r = 0.0909 and A = $19,397 for t = 8 years.

r = 0.0833 and A = $20,416 for t = 9 years.

r = 0.0823 and A = $20,601 (closest to $20,600) for t = 9.1 years

As a result, it would take the account's value to reach $20,600 in around 9.1 years (to the nearest tenth of a year).

Therefore, when calculated compoundly, it would take approximately 9.1 years for the account's value to reach $20,600, to the nearest tenth of a year.

Learn more about Compound interest, here:

https://brainly.com/question/18958915

#SPJ2

A prism is made from transparent plastic. In this plastic, light travels at 0.8
in air. Light enters one face of the prism at right-angles as shown.
NOT TO
SCALE
ө
The light just escapes from the sloping face of the prism.
What is angle 0?
A 37°
B
390
С
510
D
53°

Answers

Answer:

Real answer is im sorry if im wrong

Explanation:

A 53°

The value of the angle Θ will be 51.3°. Option C is correct.

What is the definition of geometry?

It is concerned with the geometry, region, and density of various 2D and 3D shapes.

From snell's law;

[tex]\rm n= \frac{sini}{sinr} \\\\ 0.8= \frac{sin(90-\theta)}{sin \theta} \\\\ 0.8= cot \theta \\\\ \theta= cot^{-1} (0.8)\\\\ \theta =51.3^0[/tex]

The value of the angle Θ will be 51.3°.

Hence,option C is correct.

To learn more about geometry, refer to:

https://brainly.com/question/7558603.

#SPJ2

7. It takes 1 second to hear the reflection of a loud noise made in front of a large barrier. If
the speed of sound in air is 340 m/s, how far away is the barrier?
A. 85 m
B. 170 m
C. 340 m
D. 680 m

Answers

Answer:

C 340 m

Explanation:

may i be marked brainliest?

How many degrees equal π in radians? How many revolutions (turns) equal π radians? ​

Answers

Answer:

It follows that the magnitude in radians of one complete revolution (360 degrees) is the length of the entire circumference divided by the radius, or 2πr / r, or 2π. Thus 2π radians is equal to 360 degrees, meaning that one radian is equal to 180/π ≈ 57.295779513082320876 degrees.

Explanation:

All waves travel through a

Group of answer choices

frequency

conductor

medium

wave

Answers

Conductor answer is conductor I’m sure

What is the best way for the power plant manager to modify the reactor to meet the demand for electricity? lower the control rods, which will absorb more neutrons before they can split atoms raise the control rods so that fewer neutrons are absorbed and more can split uranium atoms remove some of the fuel rods, which will leave more room for additional neutrons to split atoms add additional fuel rods to generate additional neutrons to split uranium atoms

Answers

The question is incomplete, the complete question is;

During a heat wave, there is an increased demand for electricity to operate air conditioners. The basic design of a nuclear reactor that generates electricity is shown below. What is the best way for the power plant manager to modify the reactor to meet the demand for electricity?

a)lower the control rods, which will absorb more neutrons before they can split atoms

b)raise the control rods so that fewer neutrons are absorbed and more can split uranium atoms

c)remove some of the fuel rods, which will leave more room for additional neutrons to split atoms

d)add additional fuel rods to generate additional neutrons to split uranium atoms

Answer:

b)raise the control rods so that fewer neutrons are absorbed and more can split uranium atoms

Explanation:

A nuclear reactor uses a nuclear fuel to generate electricity. The nuclear reactor makes use of a fissile isotope such as Uranium-235 as nuclear fuel which is bombarded by neutrons and causes a nuclear fission to occur leading to a consequent initiation of a chain reaction.

Control rods are used to absorb some of the neutrons and keep the reaction under control.

When there is need to increase power generation, the control rods are raised so that less neutrons are absorbed by them and more of the uranium fuel is split.

An aircraft is moving horizontally with a speed of 50m/s, at the height of 2km, an object is dropped from the aircraft. What is the vertical and horizontal velocity of an object if the angle is 23 degrees and the time interval for the object hits the ground?

Answers

Explanation:

use the diagram^

horizontal velocity of the object nvr changes, it'll stay 50m/s till it hits the ground

initial vertical velocity = 0

to find the final vertical velocity, use the formula:

[tex]v {}^{2} = u {}^{2} + 2as[/tex]

where u = 0m/s, a = 9.8m/s², and s = 2000m

solve for v.

for time taken to reach ground, use the formula:

[tex]v = u + at[/tex]

where v = the value for v u calculated above, u = 0 m/s, a = 9.8m/s² and solve for t.

A car starts from rest with an acceleration of 5.0 m / s² and travels a distance of 1.0 km. What is the speed value of this car?

Answers

Answer:

100 m/s

Explanation:

We'll begin by converting 1 km to m. This can be obtained as follow:

1 km = 1000 m

Finally, we shall determine the final velocity of the car. This can be obtained as follow:

Initial velocity (u) = 0 m/s

Acceleration (a) = 5.0 m/s²

Distance (s) = 1000 m

Final velocity (v) =?

v² = u² + 2as

v² = 0² + (2 × 5 × 1000)

v² = 0 + 10000

v² = 10000

Take the square root of both side

v = √10000

v = 100 m/s

Therefore, the speed value of the car is 100 m/s.

Give 2 possible definitions of half-life

Answers

the time required for half of something to undergo a process: such as. a : the time required for half of the atoms of a radioactive substance to become disintegrated.

Answer:

the time taken for the radioactivity of a specific isotope to fall to half its original value.

the time required for any specific property (e.g. the concentration of a substance in the body) to decrease by half.

Explanation:

I don't know if that's what your looking for

Other Questions
A triangle has angles measuring 108 and 24 degrees. What is the measure of the third angle? GEOMETRY Can anyone help for brainly, this is one of five questions, a (rotation, reflection, or translation) of 90 (clockwise, or counterclockwise,) about the origin followed by a (rotation, reflection, or translation) (right, left, up, down) _ Unit (s) Question 6Simplify the following expression-3 + 4(a - 3b + 2) - 514 - a + 3b) What changes in energy occur when the bowling ball strikes the pins? Percent of Sales Method At the end of the current year, Accounts Receivable has a balance of $615,000, Allowance for Doubtful Accounts has a credit balance of $5,500, and sales for the year total $2,770,000. Bad debt expense is estimated at 1.1% of sales. a. Determine the amount of the adjusting entry for uncollectible accounts. $fill in the blank 1 30,470 b. Determine the adjusted balances of Accounts Receivable, Allowance for Doubtful Accounts, and Bad Debt Expense. Marshall Welding Company has two service departments (Cafeteria and Human Resources) and two production departments (Machining and Assembly). The number of employees in each department follows. Cafeteria 20 Human Resources 30 Machining 100 Assembly 150 Marshall Welding uses the step-down method of cost allocation and allocates cost on the basis of employees. Human Resources cost amounts to $1,200,000, and the department provides more service to the firm than Cafeteria. How much Human Resources cost would be allocated to Machining Please answer the following question please please help me im begging you T_T Name Fill in the last two columns in the chart below. The circumference of a circle is 9.04cm.Find the length of the diameter.Give your answer rounded to 2 DP. Factorise the expression please someone answer fast dont be a scammerConsider other perspectives: how might the American experience depicted in this poem differ from that of immigrants, or of African Americans (remember, slavery was abolished in 1865 5 years after this poem was published)? What dose We would likemean If BC = 6 and AD = 5, find DC. Help meWhen an author uses unusual word order for effect, he is working with (5 points) a)diction b)syntax c)tone d)lines the table shows the costs of different size jars of peanut butter. Which of the jars have the lowest unit rate? what is the range of the data set on this dot plotA.B.C.D. What is the difference of (2x ^ 2 - 5x + 1) and (10x ^ 2 + 4x - 8) PLEASE HELP FAST!!! I WILL GIVE BRAINLIST Suppose that you're working on the production of a Latin American movie as a director, an actor, or a scriptwriter. Choose one of these three roles, and respond to the following questions from a news reporter as part of an interview. Use your creativity and imagination when writing your responses. Please type your responses in Spanish.Part ACmo se llama su nueva pelcula y de qu se trata?Part BA qu gnero cinematogrfico pertenece la pelcula?Part CPuedes describir tu papel? Someone pls answer my last question smh