AnswMake a rule : If you knew the number of valence electrons in a nonmetal atom, how would you determine the valence of the element? (Hint: Ignore hydrogen for now.) The group number of the element will tell you the amount of valence electrons. there has to be a full octet in order for it to be stable. 7.er:
Explanation:
How many atoms of Bi are there in a 41.8 g sample?
Answer:
The number of particles in the 41.8g sample of Bismuth is 12.044 × 10²³
A 16 gram sample of O2(g) fills a container at STP.
What volume is the container?
Answer:
V = 11.2 L
Explanation:
Hello there!
In this case, according to the ideal gas equation:
[tex]PV=nRT[/tex]
It is possible to compute the volume as shown below:
[tex]V=\frac{nRT}{P}[/tex]
Whereas the moles are computed are computed given the mass and molar mass of oxygen:
[tex]n=16g*\frac{1mol}{32g} =0.5mol[/tex]
Now, since the STP stands for a temperature of 273.15 K and a pressure of 1 atm, the resulting volume is:
[tex]V=\frac{0.5mol*0.08206\frac{atm*L}{mol*K}*273.15K}{1atm}\\\\V=11.2L[/tex]
Best regards!
Graphite, an allotrope of carbon, is converted into cubic diamond through a process that may take a billion years or longer. As illustrated above, scientists can make synthetic diamonds using a certain process in about one week. However, these synthetic diamonds have carbon atoms in a hexagonal lattice. Diamonds with a carbon atoms in a cubic lattice are not produced even though they are thermodynamically more stable than hexagonal diamond. Which of the following best justifies why the synthetic process produces hexagonal diamond and not the more thermodynamically stable cubic diamond?
a. The amount of energy required to create new bonds between carbon atoms in cubic diamond is much greater than the amount of energy required to create hexagonal diamond.
b. The amount of energy required to create new bonds between carbon atoms in cubic diamond is much smaller than the amount of energy required to create hexagonal diamond.
c. The activation energy needed to form cubic diamond is much less than the activation energy needed to form hexagonal diamond.
d. The activation energy needed to form cubic diamond is much greater than the activation energy needed to form hexagonal diamond.
Answer:
The activation energy needed to form cubic diamond is much greater than the activation energy needed to form hexagonal diamond.
Explanation:
The activation energy refers to the minimum energy that reacting species must possess before they can undergo a particular chemical reaction.
This implies that if species do not possess the activation energy, they hardly undergo a given reaction. The activation energy is the barrier between reactants and products.
Hence, a reaction that has a very high activation energy occurs slowly or may not even occur. The activation energy needed to form cubic diamond is much greater than the activation energy needed to form hexagonal diamond hence the synthetic process produces hexagonal diamond and not the more thermodynamically stable cubic diamond.
NH4OH+HCLO4
Total ionic
Answer:
[tex]OH^-(aq)+H^+(aq)\rightarrow H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given reactants, it is firstly necessary to set up the complete molecular reaction:
[tex]NH_4OH(aq)+HClO_4(aq)\rightarrow NH_4ClO_4(aq)+H_2O(l)[/tex]
Now, by knowing that ionic species are able to ionize, we are able to write the complete ionic equation:
[tex]NH_4^++OH^-+H^++ClO_4^-\rightarrow NH_4^++ClO_4^-+H_2O(l)[/tex]
Whereas ammonium and chlorate ions are spectator ions because they remain the same on both sides of the equation. Therefore the total or net ionic equation would be:
[tex]OH^-(aq)+H^+(aq)\rightarrow H_2O(l)[/tex]
Best regards!
What are characteristics of absorption spectra? Check all that apply.
Light is absorbed, which produces characteristic lines.
| Light is emitted, which produces characteristic lines.
Lines are dark on a visible light background.
Lines are brightly colored on a black background.
Lines are produced by electrons being excited.
Lines are produced from electrons returning to a lower energy level.
Answer:
Light is absorbed, which produces characteristic lines.
Lines are dark on a visible light background.
Lines are produced by electrons being excited.
Explanation:
Edg
The characteristics of absorption spectra light is absorbed, which produces characteristic lines, lines are dark on a visible light background and Lines are produced by electrons being excited.
What is absorption spectra?The term "absorption spectroscopy" applies to spectroscopic methods that assess how much radiation interacts with a sample and is absorbed as a proportion of frequency or wavelength. The sample takes in photons, meaning energy, from the emitting field.
What are electrons?The electron would be a subatomic particle with a negative one fundamental charge electric charge. Due to their lack of components or substructure, electrons, which have become part of the lepton particle family's first generation, could be typically regarded to be elementary particles.
The percentage of incoming electromagnetic energy that a material absorbs across a variety of frequencies is displayed in the material's absorption spectrum. In a way, an emission spectrum would be the converse of an absorption spectrum.
To know more about absorption spectrum and electrons
https://brainly.com/question/1255220
#SPJ2
(d) Other
sugar molecules become
_____ and are carried away from the crystal.
the force of attraction is
Answer:
liquid
Explanation:
defiantly
22 Which of the following statements is true for all loving organisms? A. All living organisms are made of one or more cells with a cellular membrane and have a cell wall. B. All living organisms are made of one or more cells with a cellular membrane and have a nucleus. C. All living organisms are made of one ore more cells with a cellular membrane and genetic material. D. All living organisms are made of one or more cells with a cellular membrane and have chloroplast
Answer:
C
Explanation:
Ape-x
Please help
I need to turn in in 5 min
<3
List three aids with example that are useful for people who are optically impaired
please answer then I will mark you as brainliest
Calculate the concentration of H3O⁺ in a solution that contains 1.8 × 10-5 M OH⁻ at 25°C. Identify the solution as acidic, basic, or neutral. A. 5.5 × 10-10 M, acidic B. 9.2 × 10-1 M, acidic C. 5.5 × 10-10 M, basic D. 1.8 × 10-10 M, neutral
Answer:
A. 5.5 × 10⁻¹⁰ M, acidic
Explanation:
Step 1: Given data
Concentration of H₃O⁺: 1.8 10⁻⁵ M
Step 2: Calculate the concentration of OH⁻
We will use the ionic product of water.
Kw = 1.0 × 10⁻¹⁴ = [H₃O⁺] × [OH⁻]
[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 1.0 × 10⁻¹⁴/1.8 10⁻⁵ = 5.5 × 10⁻¹⁰ M
Step 3: Determine if the solution is acidic, basic or neutral
If [H₃O⁺] > 10⁻⁷ M, the solution is acidic.If [H₃O⁺] = 10⁻⁷ M, the solution is neutral.If [H₃O⁺] < 10⁻⁷ M, the solution is basic.Then, the solution is acidic.
5.50 L of a 0.190 M CaCl2M CaCl2 solution
How do you find Grams?
Answer:
115.891
Explanation:
Molarity is equal to moles/liters so to get moles we multiply molarity by liters, after this we multiply the moles by the total atomic weight of the compound to get grams
What product(s) would be formed when these are the reactants? BaF2 + Cl2
Please answer this question correctly
Answer:
a d c a b b
Explanation:
If 75 g. of Potassium Chloride (ionic compound) is dissolved in 250 grams of
water, what will be the freezing point of the solution? Kf = 1.86
Answer:
[tex]T_{f,sol}=-15.0\°C[/tex]
Explanation:
Hello there!
In this case, for these problem about the colligative property of freezing point depression, it is possible set up the following equation:
[tex]T_{f,sol}-T_{f,water}=-i*m*Kf[/tex]
Whereas the van't Hoff's factor, i, is 2 since KCl is ionized in two ions (K+ and Cl-); and the molality (m) of the solution is computed by:
[tex]m=\frac{75g*\frac{1mol}{74.55g} }{250g*\frac{1kg}{1000g} } \\\\m=4.02mol/kg[/tex]
Thus, since the freezing point of water (ice) is 0°C, we obtain the following freezing point of the solution by plugging in:
[tex]T_{f,sol}=-(2)(4.02mol/kg)(1.86\°C/mol*kg)\\\\T_{f,sol}=-15.0\°C[/tex]
Best regards!
2. Seed color--- a. Yellow is dominant (Y) b. Green is recessive (y) c. A yy father and a yy mother d. What color(s) are the parents? e. What color(s) are the children?
Answer:
The parents are green and the children are green.
Explanation:
They all have the green recessive (y). So, the parents are green and the children are green.
Why is there not a constant molar volume for solids and
liquids?
a Solid and liquid particles are packed close together,
b The densities of solids and liquids are variable.
с
The volume of a solid or a liquid has very little
empty space.
d All of the above
Answer:
all of the above
Explanation:
i got the answer right on cK-12
How much energy is needed to evaporate 100g of water
Answer: you would have to remove 80 calories from 1 g of pure water at the freezing point, 0˚ C, to convert it to 1 g of ice at 0˚ C. Explanation:However, 540 calories of energy are required to convert that 1 g of water at 100˚ C to 1 g of water vapor at 100˚ C. This is called the latent heat of vaporization. On the other hand, you would have to remove 80 calories from 1 g of pure water at the freezing point, 0˚ C, to convert it to 1 g of ice at 0˚ C.
Which product forms from the synthesis reaction between lithium (Li) and oxygen (O)?
A. Li2O
B. LiO
C. LiO2
D. Li2O2
Answer:
A Li2O
Explanation:
Li has a 1+ charge and O has a 2- charge so to balance the charges there needs to be 2 Li for every 1 O
The product forms from the synthesis reaction between lithium (Li)and oxygen (O) is Li₂O. The correct option is A.
What is synthesis reaction?
Synthesis reaction is the reaction when two or more products combine to form a single product.
An example of a synthesis reaction is the combination of sodium (Na) and chlorine (Cl) to produce sodium chloride (NaCl).
Thus, the correct option is A. Li2O.
Learn more about synthesis reaction
https://brainly.com/question/24936069
#SPJ2
6. What is the number of moles of KF in a 29 gram sample?
a. 59.0 mols
C. 2.0 mols
b. 470 mols
d. 1684.9 mols
PLSSS HELP ASAP!!!!!!!!
Answer:
i-dk but A seems most logical to me
Explanation:
what is the speed of the electromagnetic waves please solve using correct units ill give brainliest.
Answer:
3 m
Explanation:
We'll begin by converting 99.9 MHz to Hz. This can be obtained as follow:
1 MHz = 10⁶ Hz
Therefore,
99.9 MHz = 99.9 MHz × 10⁶ Hz / 1 MHz
99.9 MHz = 99.9×10⁶ Hz
Finally, we shall determine the wavelength. This can be obtained as follow:
Frequency (f) = 99.9×10⁶ Hz
Velocity (v) = 3×10⁸ m/s
Wavelength (λ) =?
Velocity = wavelength × frequency
v = λf
3×10⁸ = λ × 99.9×10⁶
Divide both side by 99.9×10⁶
λ = 3×10⁸ / 99.9×10⁶
λ = 3 m
Thus, the wavelength of the electromagnetic wave is 3 m.
Please disregard this
well i need points
Explanation:
thanks
Determine whether each described process is endothermic or exothermic.
a. Ice melts into liquid water
b. A process with a calculated positive q.
c. Wood burns in a fireplace.
d. A process with a calculated negative q.
e. Acid and base are mixed, making test tube feel hot.
f. Solid dissolves into solution, making ice pack feel cold
Answer:
Ice melts into liquid water- endothermic
A process with a calculated positive q - endothermic
Wood burns in a fireplace - exothermic
A process with a calculated negative q - exothermic
Acid and base are mixed, making test tube feel hot - exothermic
Solid dissolves into solution, making ice pack feel cold - endothermic
Explanation:
An endothermic process is one in which heat is absorbed from the surroundings. The absorption of heat means that heat is removed from the surroundings hence the surroundings feel cool. When heat is absorbed, q is positive.
An exothermic process is one in which heat is released to the surroundings. The evolution of heat means that heat is released into the surroundings hence the surroundings feel hot . When heat is evolved, q is negative.
There are about 26 deuterium atoms for every million hydrogen atoms across the universe, but it is six times as prevalent in the water on Earth and in other solar system bodies. Deuterium has one more ———— than hydrogen.
A. Ionic pair
B. Hydrogen bond
C. Proton
D. Electron
E. Neutron
Answer:
Option E
Deuterium has one more neutron than hydrogen
Explanation:
Deuterium is an isotope of Hydrogen and hence there will variation in the number of neutron
Hydrogen has 0 neutron
Deuterium has 1 neutron and
Tritium has 2 neutron
Thus option E is correct
In the universe, there are approximately 26 deuterium atoms for every million hydrogen atoms. Deuterium has one more neutron than hydrogen.
The correct option is E.
What is deuterium?Deuterium is a stable isotope of hydrogen, whose atomic weight is 2.014.
It is also called heavy hydrogen, and it contains one neutron and one proton.
In nuclear fusion reactors, deuterium is employed as a tracer, while in heavy water moderated fission reactors, it is utilized to slow down neutrons.
Thus, the correct option is E.
Learn more about deuterium
https://brainly.com/question/3845553
_____ are the 14 transition metals that follow
lanthanum in the periodic table.
What is the blank
Answer:
Lanthanide or Lanthanides
Explanation:
sorry if this isent right, but i hope it helps
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Therefore the correct option is Lanthanides and actinides.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table is divided into blocks as s block, p block ,d block and f block. There are total two periods of f block elements. The one that comes in 6th period is called Lanthanides and one which is in 7th period is called actinides. Lanthanides and actinides are called inner transition element and contains 14 elements.
Therefore the correct option is Lanthanides and actinides.
Learn more about periodic table , here:
https://brainly.com/question/11155928
#SPJ2
what is the formula for fluoride?
Answer:Chemical formula F −
Molar mass 18.998403163 g·mol−1
Conjugate acid Hydrogen fluoride
Explanation:
Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
Since pH + pOH = 14, given a pOH of 4.53, our pH would be 14 - 4.53 = 9.47. And since the pH is greater than 7, this solution is basic. So, the correct answer choice would be D.
21 Organs consist of cells and tissues that have been adapted to perform a specific function in living organisms. The stomach is a muscular organ that is located on the left side of the upper abdomen. The stomach secretes acid and enzymes that help in the digestion of food. In simple terms, the stomach is a digestive sac. Even though the stomach has an important role in food digestion, it cannot perform the process all on its own. It depends on other organs such as the salivary glands, esophagus, liver, and intestines to help complete the process. Each organ has its own specific job, but together they make up an organ system. An organ system is a group of organs that work together to perform one or more functions. Which of the following describes the role of the immune system in the body? A. It gets rid of wastes that the body produces. B. It uses electrical signals to control body functions. C. It uses chemical messages to control body functions. D. It gets rid of pathogens that invade the body.
Answer:
The correct answer is - D. It gets rid of pathogens that invade the body.
Explanation:
Like all other organ systems, the immune system is an organ system that involves several special organs that helps in fighting any foreign object or infection that invades our body. This organ system produces specific cells or chemicals to fight or kill the microbes, and unnatural change takes place in the body.
The organs involved in the immune system are lymphocytes or white blood cells, the complement system, antibodies, the lymphatic system the thymus, bone marrow, and the spleen.
All these combinedly helps in fighting, killing the microbes or infections that occur in the body, and correct the physiological changes that occur in the body to get rid of pathogens that invade the body.
5. What is the pH of a solution with p0H= 8.5? Is this an acid, base, or neutral?
Answer:
pH = 5.5 and it is an acid
Explanation:
Fr the question given above, the following data were obtained:
poH = 8.5
pH =?
pH + pOH = 14
pH + 8.5 = 14
Collect like terms
pH = 14 – 8.5
pH = 5.5
pH scale reads as follow:
0 to 6 => Acidic
7 => Neutral
8 to 14 => Basic
With the above pH scale, we can conclude that the solution with pH 5.5 is acidic.
The half-life of I-37 is 8.07 days. If 25 grams are left after 40.35 days, how many grams were in the original sample?
Answer:
800 g
Explanation:
We can express the decay of I-37 using the formula:
Final Mass = Initial Mass * [tex]0.5^{\frac{Time}{Half-Life} }[/tex]We input the data:
25 g = Initial Mass * [tex]0.5^{(\frac{40.35}{8.07})}[/tex]And solve for Initial Mass:
25 g = Initial Mass * [tex]0.5^{5}[/tex]25 g = Initial Mass * 0.03125Initial Mass = 800 gMeaning that out 800 grams of I-37, only 25 will remain after 40.35 days.