Plants that respond to light are responding
to an:
a. internal stimulus
b. external stimulus
please answer
Answer:
The answer would be a
Explanation:
In a test run, a certain car accelerates uniformly from zero to 20.4 m/s in 2.60 s.
Required:
a. What is the magnitude of the cars acceleration?
b. How long does it take the car to change speed from 10.0 m/s to 20 m/s.
c. Will doubling the time always double the change in speed? why?
Answer:
(a) The acceleration is 7.85 m/s²
(b) It takes the car to change speed from 10.0 m / s to 20 m / s in a time of 1.27 seconds.
(c) Doubling the time will double the change in velocity if the acceleration is kept constant.
Explanation:
(a) Acceleration is the physical quantity that measures the rate of change of velocity with time. That is, acceleration relates changes in speed with the time in which they occur, that is, it measures how fast the changes in speed are.
The average acceleration is calculated using the following expression:
[tex]a=\frac{vf-vi}{t}[/tex]
where a is the acceleration, vf is the final velocity, vi is the initial velocity and t is the time.
In this case:
vf= 20.4 m/svi=0 m/st= 2.60 sReplacing:
[tex]a=\frac{20.4 \frac{m}{s} - 0\frac{m}{s} }{2.60 s}[/tex]
a= 7.85 m/s²
The acceleration is 7.85 m/s²
(b) In this case you know:
a= 7.85 m/s²vf= 20 m/svi= 10 m/sReplacing:
[tex]7.85 \frac{m}{s^{2} } =\frac{20 \frac{m}{s} - 10\frac{m}{s} }{t}[/tex]
and solving you get:
[tex]t=\frac{20 \frac{m}{s} - 10\frac{m}{s} }{7.85 \frac{m}{s^{2} } }[/tex]
t=1.27 s
It takes the car to change speed from 10.0 m / s to 20 m / s in a time of 1.27 seconds.
(c) Being:
[tex]a=\frac{vf-vi}{t}[/tex]
Then:
a*t= vf - vi
vf - vi represents the change in velocity. You can see that, if a (acceleration) is constant, then (vf - vi) is directly proportional to the time t: therefore, if t doubles, the change in velocity doubles as well.
In other words, doubling the time will double the change in velocity if the acceleration is kept constant.
An astronaut weighing 190 lbs on Earth is on a mission to the Moon and Mars.
Required:
a. What would he weigh in newtons when he is on the Moon?
b. How much would he weigh in newtons when he is on Mars, where the acceleration due to gravity is 0.38 times that on Earth?
Answer:
The weight is defined as:
W = m*g
where:
m = mass
g = gravitational acceleration.
We know that in Earth the astronaut weights 190 lb-f (this is force, not mass, the correct unit here is 190 lb*m/s^2)
then:
190 lb*m/s^2 = m*9.8m/s^2
(190 lb*m/s^2)/(9.8m/s^2) = 19.39 lb
Now we know the mass of the astronaut.
a) wieght on the moon in Newtons.
Newtons uses kilograms as the units of mass, then we need to rewrite the mass of the astronaut in kg.
we know that 1lb = 0.454 kg
Then 19.39 lb is equal to: 19.39*0.454 kg = 8.8 kg
We know that the acceleration due to gravity on the Moon is one-sixth that on Earth.
then: g = (9.8m/s^2)/6
And the weight of the astronaut in the moon will be:
W = 8.8 kg*(9.8m/s^2)/6 = 14.37 N
b) The weight on mars, where the acceleration due to gravity is 0.38 times that on Earth, we have:
g = (9.8m/s^2)*0.38
then the weight will be:
W = 8.8kg*(9.8m/s^2)*0.38 = 32.77 N
What acceleration will you give a 22.4 kg box if you push it with a force of 83.1N
Answer:
mass =22.4kg
force=83.1N
a=?
f=ma
a=f/m
a=83.1/22.4
a=3.70m/s^2
Tell me the max amount you should owe on this card.
Your credit limit is $1,000.
What is the max you should ever owe on this card?
$
Your credit limit is $2,500.
What is the max you should ever owe on this card?
$
Answer:
the max is 2,500 or less
Explanation:
because you cant owe anymore
A solid is 5 cm tall, 3 cm wide, and 2 cm thick. It has a mass of 129 g. What is its
density?
Answer:
4.3 g/cm³ or 4.3g/cc
Explanation:
Volume(V) = Height × Length × Width
= 5cm × 3cm × 2cm
= 30cm³
Mass(m) = 129gram
So,
Density = m/V
= 129g/30cm³
= 4.3g/cc or 4.3g/cm³
1) Andrea and Chuck are riding on a merry-go-round. Andrea rides on a horse at the outer rim of the circular platform, twice as far from the center of the circular platform as Chuck, who rides on an inner horse. When the merry-go-round is rotating at a constant angular speed, Andrea's tangential speed is which of the following?a) twice Chuck's.b) the same as Chuck's.c) half of Chuck's.d) impossible to determine.2) When the merry go round is rotating at a constant angular speed, Andrea's tangential speed is:______.a) twice Chuck's.b) the same as Chuck's.c) half of Chuck's.d) impossible to determine.
Explanation:
The tangential speed of Andrea is given by :
[tex]v=r\omega[/tex]
Where
r is radius of the circular path
ω is angular speed
The merry-go-round is rotating at a constant angular speed. Let the new distance from the center of the circular platform is r'
r' = 2r
New angular speed,
[tex]v'=r'\omega'\\\\v'=(2r)\omega\\\\v'=2r\omega\\\\v'=2v[/tex]
New angular speed is twice that of the Chuck's speed.
Why do we perform stork stand test
Answer:
umm becuase it is a test and you need them
Explanation:
Calculate the escape velocity
the moon's surface given that a man on the moon has 1/6 his weight on earth
Answer:
v = 2.38 × 10³ m/s
Explanation:
Escape velocity, v = √(2gR) where g = acceleration due to gravity on planet and R = radius of planet.
Since it is given that the weight of the man on the moon is 1/6 his weight on earth, and g' = acceleration due to gravity on moon and g = acceleration due to gravity on earth and m = mass of man,
mg' = mg/6
g' = g/6
Since g = 9.8 m/s²,
g'= 9.8 m/s² ÷ 6
g' = 1.63 m/s²
The escape velocity of the moon is thus v = √(2g'R) where R = radius of moon = 1.737 × 10⁶ m.
Substituting these into v, we have
v = √(2g'R)
v = √(2 × 1.63 m/s² × 1.737 × 10⁶ m)
v = √[5.663 × 10⁶ (m/s)²]
v = 2.38 × 10³ m/s
At a distance of 10 km from a radio transmitter, the amplitude of the E-field is 0.20 volts/meter. What is the total power emitted by the radio transmitter
Answer:
The total power is [tex]P = 6.665 *10^{4} \ W[/tex]
Explanation:
From the question we are told that
The distance is [tex]r = 10 \ km = 1000 \ m[/tex]
The amplitude of the electric field is [tex]E = 0.20 \ volt/meter[/tex]
Generally the average intensity of the electromagnetic field from the radio transmitter is mathematically represented as
[tex]I = \frac{E^2}{ 2 \mu_o * c }[/tex]
Here c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]
[tex]\mu_o[/tex] is the permeability of free space with value [tex]\mu_o = 4\pi *10^{-7} \ N/A^2[/tex]
So
[tex]I = \frac{0.2^2}{ 2 * 4\pi *10^{-7} * 3.0*10^{8} }[/tex]
=> [tex]I = 5.307 *10^{-5} \ W/m^2[/tex]
Generally this intensity can also be mathematically represented as
[tex]I = \frac{P }{ 4 \pi r^2 }[/tex]
=> [tex]P = I ( 4 \pi r^2 )[/tex]
=> [tex]P = 5.307 *10^{-5} ( 4 * 3.142 * 1000^2 )[/tex]
=> [tex]P = 6.665 *10^{4} \ W[/tex]
The total power emitted by the radio transmitter is [tex]6.67\times 10^4 \ W[/tex].
The given parameters;
amplitude of the electric field, E = 0.2 V/mdistance of the transmitter, = 10 km = 10,000 mThe intensity of the radio wave from the transmitter is calculated as follows;
[tex]I = \frac{E^2}{2\mu_0 c} \\\\I = \frac{0.2^2 }{2\times 4\pi \times 10^{-7} \times 3\times 10^8} \\\\I = 5.305 \times 10^{-5} \ W/m^2[/tex]
The total power emitted by the radio transmitter is calculated as follows;
[tex]I = \frac{P}{A} \\\\P = IA\\\\P = I \times 4\pi r^2\\\\P = (5.305\times 10^{-5} )\times 4\pi \times (10,000)^2\\\\P = 6.67\times 10^{4} \ W[/tex]
Thus, the total power emitted by the radio transmitter is [tex]6.67\times 10^4 \ W[/tex].
Learn more here:https://brainly.com/question/19340071
What was your train of thought as you navigated the picture of the candle?
Answer:
Where is the picture
Explanation:
WHERE IS THE PICTURE
Two particles are separated by 0.38 m and have charges of -6.25 x 10-°C and 2.91 x 10-°C. Use Coulomb's law to predict the force between the particles if the distance is cut in half. The equation for Coulomb's law is F = kqi 42, and the constant, k, equals 9.00 x 109 Nm2/C2 2
Answer:
-4.35 × 10^-6 N
Explanation:
i just answered it on ap3x :)
A 15.0kg block is dragged over a rough, horizontal surface by a 70.0-N force acting at 20.0 degrees above the horizontal. The block is displaced 5.0 m, and the coefficient of kinetic friction is 0.3.
a. Draw a free body diagram. Draw your coordinate system and label the axes.
b. Calculate the work done on the block by the 70 N force.
c. Calculate the work done on the block by the normal force.
d. Calculate the work done on the block by the gravitational force.
e. Calculate the work done on the block by the force of friction.
Answer:
[tex]W=70 * 5cos20 = 328.89 J[/tex]
[tex]W_n = 0[/tex]
[tex]W_g=0[/tex]
[tex]W_f= -184.59J[/tex]
Work done is 0
Explanation:
From the question we are told that
Weight of block =15.0kg
Force acting on the block = 70.0N
At an angle of 20 degree
Displacement of block is 5m
Coefficient of kinetic friction 0.3
b) Generally work done by force is give by [tex]W=fdcos \theta[/tex]
therefore
[tex]W=70 * 5cos20 = 328.89 J[/tex]
c) there is no work done by the normal force in this scenario because
normal force in this case is perpendicular to the displacement of the motion
[tex]W_n = 0[/tex]
d) The displacement in the vertical direction is 0
Therefore the gravitational work done is 0 [tex]W_g=0[/tex]
e)Generally in finding work done by friction we first find frictional force
Mathematically the equation for frictional force is given [tex]f = \alpha N[/tex]
Given that
[tex]N=mg-Fsin20[/tex]
[tex]N= 15.0*9.8 - 70 sin20[/tex]
[tex]N=123 N[/tex]
[tex]f=0.3* 123.06 = 36.92N[/tex]
Mathematically solving to get work done by frictional force [tex]W_f[/tex]
[tex]W_f= -fd\\W_f = -36.92 * 5[/tex]
[tex]W_f= -184.59J[/tex]
the frictional force work done is [tex]W_f= -184.59J[/tex]
Please HElp!!
Name five conductors and insulators
Answer:
Conductors- copper, aluminum, gold, and silver.
Insulators- glass, air, plastic, rubber, and wood.
Explanation:
Answer: 5 conductors are copper, aluminum, gold, iron, and silver and 5 insulators are glass, air, plastic, rubber, and wood.
A woman exerts a horizontal force of 113 N on a crate with a mass of 31.2 kg.
Required:
a. If the crate doesn't move, what's the magnitude of the static friction force (in N)?
b. What is the minimum possible value of the coefficient of static friction between the crate and the floor?
Answer:
a) 113N
b) 0.37
Explanation:
a) Using the Newton's second law:
\sum Fx =ma
Since the crate is not moving then its acceleration will be zero. The equation will become:
\sum Fx = 0
\sumFx = 0
Fm - Ff = 0.
Fm is the moving force
Ff is the frictional force
Fm = Ff
This means that the moving force is equal to the force of friction if the crate is static.
Since applied force is 113N, hence the magnitude of the static friction force will also be 113N
b) Using the formula
Ff = nR
n is the coefficient of friction
R is the reaction = mg
m is the mass of the crate = 31.2kg
g is the acceleration due to gravity = 9.8m/s²
R = 31.2 × 9.8
R = 305.76N
Recall that;
n = Ff/R
n = 113/305.76
n = 0.37
Hence the minimum possible value of the coefficient of static friction between the crate and the floor is 0.37
PLEASE HELP!!!!
Suppose a tractor was moving forward at 6.0 m/s. It runs into a pile of hay and is
brought to a stop in 1.1 s. If the tractor had a mass of 2550 kg, with what force did
the pile of hay stop the tractor?
A. -5.5N
B. -14000N
C. 15000N
D. -15000N
E. -0.0021N
F. -0.000072
Answer:
B )-14000N
Explanation:
F=mv-mu
t
F =2550(0)-2550(6)
1.1
F = -13909.09
approximately -14000N
Suppose a tractor was moving forward at 6.0 m/s. It runs into a pile of hay and is brought to a stop in 1.1 s. If the tractor had a mass of 2550 kg, the force did the pile of hay stop the tractor 14000N
What are the types of force ?Force can be a unit of pushing or pulling of any object which result from the object’s interaction or movement, without applying force the objects can not be moved, can be stopped or change the direction.
Force is a quantitative parameter between two physical bodies, means an object and its environment, there are various types of forces in nature.
If an object present in its moving state will be either static or motion, the position of the object will be changed if it is pushed or pulled and The external push or pull upon the object is mainly called as Force.
The contact force that occurs when we apply some effort on an object such as Spring Force, Applied Force, Air Resistance Force, Normal Force, Tension Force, Frictional Force
Non-Contact forces are the type of forces that occur from a distance such as Electromagnetic Force, Gravitational Force, Nuclear Force
F=mv-mu
t
F =2550(0)-2550(6)
1.1
F = -13909.09
approximately -14000N
For more details Force, visit
brainly.com/question/13691251
#SPJ2
The energy of a photon is ________ proportional to its wavelength.
Answer:
The amount of energy is directly proportional to the photon's electromagnetic frequency and thus, equivalently, is inversely proportional to the wavelength. The higher the photon's frequency, the higher its energy. Equivalently, the longer the photon's wavelength, the lower its energy.
Explanation:
Plz mark brainliest thanks
For the following types of electromagnetic radiation, how do the wavelength, frequency, and photon energy change as one goes from the top of the list to the bottom?
a. radio waves
b. infared radiation
c. visible light
d. ultraviolet radiation
e. gamma radiation
Answer:
Wavelength, frequency and the photon energy changes as the one goes across the ranges of the electro-magnetic radiations.
Explanation:
Electro-magnetic radiations may be defined as the form of energy that is radiated or given by the electro-magnetic radiations. The visible light that we can see is the one of the electro-magnetic radiations. Other forms are the radio waves, gamma waves, UV rays, infrared radiations, etc.
The wavelength of the radiations decreases as we go from a. radio waves -- b. infrared radiation -- c. visible light -- d. ultraviolet radiation -- e. gamma radiation.
The frequency of the radiations increases when we move from a. radio waves -- b. infrared radiation -- c. visible light -- d. ultraviolet radiation -- e. gamma radiation.
The photon energy of the radiations increases when we move from a. radio waves -- b. infrared radiation -- c. visible light -- d. ultraviolet radiation -- e. gamma radiation.
Sugar crystals enter a dryer at the rate of 1000 kg h-1 and at 20% w.b. moisture content. They leave the dryer at 3% w.b. moisture content. If the drying process requires 3000 kJ kg-1 of water removed, estimate the amount of heat required per hour and the rate of dry crystals out of the dryer.
Answer:
The dryer evaporate 200 - 24.74 kg of water per hour
To remove 1kg of water it need 3000 K J
So to remove, 175.26 Kg
it need 5.257x [tex]10^{5}[/tex] KJ of heat per hour.
Explanation:
In one hour, the amount of sugar entering = 1000 kg
w.b moisture content is defined as,
weight of water / weight of water + weight of dry
[tex]W_{w}[/tex]/[tex]W_{w}[/tex] + [tex]W_{d}[/tex] x 100
[tex]W_{w}[/tex] + [tex]W_{d}[/tex] = 1000 kg when entering
it has 20% moisture content when entering
[tex]W_{w}[/tex] = 0.2 x 1000 = 200 kg
when leaving it has 3% moisture content then weight of dry material
[tex]W_{d}[/tex] = 1000 - 200 = 800 Kg
[tex]\frac{W_{w}^{'} }{W_{w}^{'} + W_{d}^{'} }[/tex] = 0.03
[tex]\frac{W_{w}^{'} }{W_{w}^{'} + 800 }[/tex] = 0.03
[tex]W_{w} ^{'}[/tex] = 0.03 x [tex]W_{w} ^{'}[/tex] + 0.03 x 800
[tex]W_{w} ^{'}[/tex] = 24.74 kg
When leaving the dryer, the crystals has total weight of the water = 24.74 kg per hour.
The dryer evaporate 200 - 24.74 kg of water per hour
To remove 1kg of water it need 3000 K J
So to remove, 175.26 Kg
it need 5.257x [tex]10^{5}[/tex] KJ of heat per hour.
If a net horizontal force of 0.8 N is applied to a toy whose mass is 1.2 kg, acceleration is?
Hello!
[tex]\large\boxed{a = \frac{2}{3}m/s^{2}}[/tex]
Use the equation F = m · a to solve. We are given the force (N) and mass (kg), so we can solve for the acceleration by plugging in the given values:
0.8 = 1.2a
0.8 / 1.2 = a
a = 2/3 m/s²
derive an expression for torque experiend by an electric dipole placed in a uniform electric field
Answer:
The torque τ on an electric dipole with dipole moment p in a uniform electric field E is given by τ = p × E where the "X" refers to the vector cross product. Ref: Wikipedia article on electric dipole moment.
Explanation:
PLEASE ANSWER ASAP BEFORE MY TEACHER AND MY MOM KILLES ME PLEASE ASAP
The first person with the right answer gets to be a brainlest
In the attachment there is a density column where there is colour
Question: tell me why is the red at the bottom of the density column if it is the least dense
Answer:
That is not meant to be red, it is the bottom of the beaker
That is not meant to be red, it‘s the bottom of the beaker. The star is at the very bottom of the beaker. it’s just the base of the beaker.
A thin-walled vessel of volume V contains N particles which slowly leak out of a small hole of area A. No particles enter the volume through the hole. Find the time required for the number of particles to decrease to N/2. Express your answer in terms of A, V, and v.
Answer:
[tex]\frac{V}{2av}[/tex]
Explanation:
From the question we are told that
Volume V
Contains N particles
Leaks from a small hole of area A
Generally the equation for Flow rate is given as
Volume Flow Rate [tex]V_r = A * v[/tex]
Mathematically we find the time taken to flow half way which is given by
[tex]\frac{(V/2)}{A*v}[/tex]
Therefore the time taken is
[tex]\frac{V}{2av}[/tex]
4. You’re driving a car that can climb a maximum gradient of 500m/km. The hill in front of you starts at an elevation of 20m and reaches 100m. The total distance up the hill is 1.5km? What is the gradient of the hill and will your car make it?
Answer:
Gradient of the hill is 53.33m/km which is lesser than the 500 m/km. So, he will be able to climb the hill conveniently.
Explanation: Given that
Maximum gradient = 500 m/km
Total distance = 1.5 km
Starting elevation = 20 m
Final elevation = 100 m
Gradient = change in elevation/ total distance.
Now, substitute the values into the formula.
Gradient = (100m - 20m)/1.5km
= 80m/1.5km
= 53.33m/km
Gradient of the hill is 53.33m/km which is lesser than the 500 m/km. So, he will be able to climb the hill conveniently.
Is Chocolate Milk a compound,mixture or a element
Answer:
mixture
Explanation:
because of many Ingredients it is called a mixture
what is general relativity
Explanation:
General relativity is a theory of space and time. ... The central idea of general relativity is that space and time are two aspects of spacetime. Spacetime is curved when there is matter, energy, and momentum resulting in what we perceive as gravity. The links between these forces are shown in the Einstein field equations.
A circuit with a 12 V battery and lamp has a current of 3 A. What is the resistance of the lamp?
An ideal gas is confined to a container with constant volume. The number of moles is constant. By what factor will the pressure change if the absolute temperature triples
Answer:
1/3
Explanation:
Gay Lusaac's law states that "the pressure of a given mass of gas is directly proportional with the absolute temperature of the gas, provided that the volume is kept constant."
In formula, we say that
P/T = k
Where
P = pressure at different points
T = temperature at different points
k = constant of proportionality
From the stated formula, if we multiply the temperature by 3, we have
P/3T = k
P * 1/3T = k
And from this, we see the pressure will change by a value of 1/3
For an object like a planet, with a typical temperature of a few hundred kelvin, what kind of blackbody radiation would it principally emit
Answer:
Low-temperature blackbody
Explanation:
There are 3 types of blackbody temperatures.
Low-temperature blackbody
High temperature extended area blackbody
High-temperature cavity blackbody
A Low-temperature blackbody is a type of black body radiation that has the range of -40° C to 175° C, typically between 233 K and 448 K. A perfect fit for the temperature range mentioned in the question, "a few hundred Kelvin". Therefore, it's the kind of blackbody temperature that the object would emit.
You work at a garden store for the summer. You lift a bag of fertilizer with a force of 112 N, and it moves upward with an acceleration of 0.790 m/s^2.
a. What is the mass of the fertilizer bag?
b. How much does the fertilizer bag weigh?
Given :
Force provided, F = 112 N.
Acceleration of the bag, a = 0.79 m/s².
To Find :
a. What is the mass of the fertilizer bag?
b. How much does the fertilizer bag weigh?
Solution :
We know, force is given by :
F = ma
m = F/a
m = 112/0.79 kg
m = 141.77 kg
Now, weight is given by :
W = mg
W = 141.77 × 9.8 N
W = 1389.35 N
Therefore, the mass of fertilizer bag is 141.77 kg and weight us 1389.35 N.