Answers
Car at rest:
velocity= 0m/s
Acceleration:
0.2m/s²
Since total time:
3 min = 180s
Formula of acceleration:
acceleration = [final velocity - initial velocity] ÷ [total time]
Velocity at end:
0.2m/s² = [final velocity - 0m/s] ÷ [180s]
0.2m/s² × 180s = [final velocity]
[final velocity] = 36m/s
Distance travelled:
Velocity = displacement(distance) ÷ time
36m/s = displacement(distance) ÷ 180s
displacement(distance) = 36m/s × 180s
displacement(distance) = 6480m
Hey I'm sorry but i do not understand why the answer on your worksheet for distance travelled is 3240m... its half of what my answer is...
Related Questions
Ask Your Teacher An electric utility company supplies a customer's house from the main power lines (120 V) with two copper wires, each of which is 34.0 m long and has a resistance of 0.109 Ω per 300 m. (a) Find the potential difference at the customer's house for a load current of 116 A.
Answers
Answer:
The potential difference at the customer's house is 117.1 V.
Explanation:
a) The potential difference at the customer's house can be calculated as follows:
[tex] \Delta V_{h} = \Delta V_{p} - \Delta V_{l} [/tex]
Where:
[tex]V_{h}[/tex]: is the potential difference at the customer's house
[tex]V_{p}[/tex]: is the potential difference from the main power lines = 120 V
[tex]V_{l}[/tex]: is the potential difference from the lines
[tex] \Delta V_{h} = \Delta V_{p} - IR [/tex]
The resistance, R, is:
[tex]\frac{0.109 \Omega}{300 m}*2*34.0 m = 0.025 \Omega[/tex]
Now, the potential difference at the customer's house is:
[tex]\Delta V_{h} = 120 V - 116A*0.025 \Omega = 117.1 V[/tex]
Therefore, the potential difference at the customer's house is 117.1 V.
I hope it helps you!
Somebody help!?
13. The graph below represents the speed of a car vs. time. Circle the letter(s) with the lowest acceleration.
What is the acceleration? How do you know?
Answers
Answer:
acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities. The orientation of an object's acceleration is given by the orientation of the net force acting on that object.
Explanation:
Calculating acceleration involves dividing velocity by time — or in terms of SI units, dividing the meter per second [m/s] by the second [s]. Dividing distance by time twice is the same as dividing distance by the square of time. Thus the SI unit of acceleration is the meter per second squared .
Velocity is a description of an object’s blank
Answers
Velocity is the description of an object's motion from one point to another.
It tells the speed with which the trip is completed, and the direction from the start-point to the end-point. It tells nothing about any twists, turns, loops, bends, or stops along the way.
8. You have two iron rods which are identical in appearance, but one is a permanent magnet and the other is unmagnetized. What series of simple experiments can you perform, using only the two rods, which will allow you to determine which of the rods is the permanent magnet
Answers
Answer:
Explanation: Let assume that bars are labeled A and B
Method 1
Using just the identical appearing bar magnet and unmagnetized iron bar.
Place the end of bar A in the middle of bar B.
If bar A sticks to bar B, then bar A is the magnet and bar B the umagnetized iron bar.
If bar A jumps to one of the ends of bar B, then bar B is the magnet.
Reason been that the magnetic field on a bar magnet is greatest at the two poles where the field comes out of the magnet. The center, between the poles, will be the weakest part of the field.
Method 2
Another solution would be to separate the two by quite some distance, float them on a piece of cork/wood in a plastic bucket or suspend them from long strings, then see which one consistently (eventually) lines up tending towards the Earth’s magnetic field.
I need help asap please please
a light ray strikes at a plane mirror at an angle of incident of 35 degree what would the angle of reflection be explain???
Answers
laws of reflection
I = r
angle of incident = angle of reflection
35 = 35
The mass density of a certain planet is uniform throughout the volume of the planet. If r is the distance from the center of the planet to a point mass inside the planet, the gravitational force on the mass is
Answers
Answer:
F= GMm/r^2
Explanation:
According to newtons formula for gravitation,
F= GMm/r^2
A small child has a wagon with a mass of 10 kilograms. The child pulls on the wagon with a force of 2 newtons. What is the acceleration of the wagon?
Answers
Answer:
0.2 m/s²Explanation:
Given,
Mass ( m ) = 10 kg
Force ( f ) = 2 Newtons
Acceleration ( a ) = ?
Now, let's find the acceleration :
We know that,
[tex]f = ma[/tex]
Plug the values
[tex]2 = 10a[/tex]
Swap the sides of the equation
[tex]10a = 2[/tex]
Divide both sides of the equation by 10
[tex] \frac{10a}{10} = \frac{2}{10} [/tex]
Calculate
[tex]a = 0.2 \: {metre \: per \: second \: }^{2} [/tex]
Hope this helps...
Best regards!!
A wire carrying a 35.0 A current passes between the poles of a strong magnet such that the wire is perpendicular to the magnet's field, and there is a 2.55 N force on the 3.00 cm of wire in the field. What is the average field strength (in T) between the poles of the magnet
Answers
Answer:
7.65 T
Explanation:
From the question,
Using,
F = BILsinФ......................... Equation 1
Where F = Force, B = magnetic field strength, I = current, L = Length, Ф = Angle.
Make B the subject of the equation
B = F/ILsinФ........................Equation 2
Given: F = 2.55 N, I = 32 A, L = 3.00 cm = 0.03 m, Ф = 90° (perpendicular)
Substitute into equation 2
B = 2.55/(32×0.03×sin90°)
B = 2.55/0.96
B = 7.65 T
You can chew through very tough objects with your incisors because they exert a large force on the small area of a pointed tooth. What pressure in Pa can you create by exerting a force of 360 N with your tooth on an area of 1.08 mm2
Answers
Answer:
3.33×10⁸ Pa
Explanation:
Pressure: This can be defined as the force acting normally (perpendicular) per unit area. The S.I unit of force is N/m² or Pa.
P = F/A.................. Equation 1
Where F = force created with the tooth, A = Area.
Given: F = 360 N, A = 1.08 mm² = 1.08/1000000 = 1.08×10⁻⁶m.
Substitute this values into equation 1
P = 360/1.08×10⁻⁶
P = 3.33×10⁸ Pa.
Hence the pressure created = 3.33×10⁸ Pa
Calculating heat gained, need help!!!
Q=(m)(c)(triangle T)
trial 1:
Q=(0.4)(4.186 J/kg)(78)=?
trial 2:
Q=(0.6)(4.186 J/kg)(78)=?
trial 3:
Q=(0.45)(4.186 J/kg)(75)=?
Answers
Explanation:
q = mCΔT
where m is mass,
C is specific heat capacity,
and ΔT is change in temperature.
Make sure all your units match. Assuming the substance is water, C = 4186 J/kg/°C.
Trial 1:
q = (0.4 kg) (4186 J/kg/°C) (78°C)
q = 130,600 J
Trial 2:
q = (0.6 kg) (4186 J/kg/°C) (78°C)
q = 195,900 J
Trial 3:
q = (0.45 kg) (4186 J/kg/°C) (75°C)
q = 141,300 J
Bumper car A (281 kg) moving +2.82 m/s makes an elastic collision with bumper car B (209 kg) moving +1.72 m/s. What is the velocity of car B after the collision?
Answers
The velocity of car B after the calculation can be obtained as 5.5 m/s.
What is a collision?We have to look at the principle of the conservation of the linear momentum and that is what we need so as to be able to deal with the problem that we have in this question as we have it here.
We know that the total momentum of the system would have to be constant and the implication of this is that the momentum before collision must be the same as the momentum after collision if we have been able to designate the system as a closed system.
Using the formula as we have shown it, we know that;
Momentum before Collison must be equal to momentum after collision
As such we have the following as shown below;
(281 * 2.82) + (209 * 1.72) = (281 * 0) + (209 * v)
792.42 + 359.48 = 209 v
v = 5.5 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
A series combination of 12 Ω and 3 Ω is connected in parallel with another series combination of 6 Ω and 3 Ω. If a potential difference of 4 V is applied across it find the i) current drawn from the battery ii) current through 12 Ω resistor (iii)potential difference across 6 Ω resistor?
Answers
Answer:
Explanation:
Resultant of 12 and 3 ohm in series = 15 ohm
Resultant of 6 and 3 ohm = 9 ohm
Total resultant resistance of circuit = 15 x 9 / (15 + 9)
= 5.625 ohm
current drawn from battery = 4 / 5.625
= .711 A
ii )current through 12 ohm = 4 / (12 + 3 ) , because potential diff over 12 and 6 ohm will be 4 V .
current through 12 ohm = .267 A
iii )
current through 6 ohm
= .711 - .267
= .444 A
potential difference
= .444 x 6
= 2.664 V .
Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus
Answers
Answer:
The neutron is a subatomic particle, symbol
n
or
n0
, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.
Explanation:
pls mark me as BRAINLIEST
= 21000
19
20
= 19,950
TRY THESE
Amachinery worth 10.500 depreciated by 5% Find its value after one year
Find the population of a city after 2 years, which is at present 12 lakh, if the rate
of increase is 49
6
M
EXERCISE 8.3
Calculate the amount and compound interest on
원
(a) * 10,800 for 3 years at 12% per annum compounded annually.
125%
18,000 for 2 years at 10% per annum compounded annually.
(c) 62,500 for 12 years at 8% per annum compounded half yearly.
(d) *8,000 for 1 year at
at 9% per annum compounded half yearly.
(You could use the year by year calculation using SI formula to verify).
(e) $10,000 for 1 year 48% per annum compounded half yearly.
from Bant to buy a conter at a rate of 15% pa
Answers
What force is required to give an object with mass 300 kg an acceleration of 2
m/s2?
O A. 300 N
O B. 1200 N
O C. 600 N
O D. 150 N
Answers
Answer:
C. 600 N
Explanation:
Given,
mass of object (m)= 300kg
acceleration(a) =2m/s^2
We know that,
Force(F)=ma
=300*2
=600N
So,600N force is required to give an object.
Answer:
600 N
Explanation:
aye pecks
You and a friend are on a swing set and her swing is slightly longer than yours. If you both start swinging at the same time, from the same height, where will she be after you have completed one complete swing back and forth?
a. She will still be at the same height as you.
b. She will be slightly higher than you.
c. She will be slightly lower than you but moving downward away from you.
d. She will be slightly lower than you but moving upward toward you.
Answers
Answer:
d. She will be slightly lower than you but moving upward toward you.
Explanation:
Since your swing is slightly shorter than your friend's swing, then you will have more angular speed than your friend. Angular speed increases with a decrease in radius. The closer the body is to the center, the faster the body swings. By the time you would have completed one complete swing back and forth, your friend will just be moving towards you, and she will be slightly lower than you but moving upwards towards you. This principle is the same reason gymnasts pull their limbs closer to their body when they need to swing faster.
Is a motor a load that can be found in a circuit?
Answers
Answer:
yes you can find a motor in a circuit
a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?
Answers
Answer:
t = 0.051 seconds
Explanation:
Given that,
A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.
The average speed of the skydiver is 174 miles/hour
We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,
[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]
So, a skydiver dive for 0.051 seconds.
Let's say that we have a pilot that is dropping a package from a plane that is flying horizontally at a constant speed. If we neglect air resistance when the package hits the ground what would be the horizontal location of the package with respect to the plane?
Answers
Answer:
The package will be directly below the location of the plane.
Explanation:
Look up projectile motion for more information. The horizontal speed of the package is separate from the vertical speed of the package. The vertical speed of the falling package will be based on the rate of acceleration and the height of the package when dropped. The horizontal speed of the package will be the same as the plane so the package will remain directly below the plane the entire time until the package hits the ground.
The horizontal location of the package with respect to the plane will be parallel to the plane if no air resistance act on it. The pack will be straight to down because of the gravity.
What is gravitational force?Gravitational force is the force by which an object attracts other objects into its center of mass. Earth attracts every objects in its surface towards its center that's why we are all standing on the ground.
The gravitational force acting on a body is dependent on its mass and height. From an object falling from a height will experience a positive acceleration downwards to the ground.
If any air resistance is present there, the path of motion of the falling object from the height might be changed randomly. Here, the package is falling from plane without any air resistance and it will be straight down to the plane.
To find more on gravitational force, refer here:
https://brainly.com/question/12528243
#SPJ5
The solubility of barium nitrate is 9.02 g/100 g H2O at 20°C. A 15.2 g sample of barium nitrate is added to 200.0 g of water at 20°C. Is the solution saturated, unsaturated, or supersaturated?
Answers
Answer:
The solution is unsaturated.
Explanation:
Saturated solutions are those solutions with the maximum amount of solute completely dissolved by the solvent. This indicates that although more solute is added, it does not dissolve. In this case the amount of solute is equal to the solubility coefficient.
The supersaturated solution is one in which the amount of solute exceeds the solubility of the solvent, that is, it has a greater amount of dissolved solute than that which it admits at that temperature. In this case a solution contains solute above the solubility coefficient.
A solution is considered to be unsaturated if the mass of dissolved solute is less than that corresponding to that of saturation. This indicates that it is possible to add more solute and that it dissolves. In this case the solution contains solute below the solubility coefficient.
The solubility of barium nitrate is 9.02 g/100 g H₂O at 20°C.
A 15.2 g sample of barium nitrate is added to 200.0 g of water at 20°C. This is: 15.2 g /200 g H₂O. Dividing by two you get: 7.6 g /100 g H₂O
Comparing with the solubility of barium nitrate, you can see that the mass of dissolved solute is less than the corresponding one. This indicates that the solution is unsaturated.
By starting with a falsifiable hypothesis and proceeding to gather data and ensure replicability, a scientist can contribute to the potential formation of a(n)
Answers
Answer:
theory
Explanation:
A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.
Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.
A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.
Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.
7.Why are we able to drink cold drink with straw from a bottle?
Answers
Explanation:
Because of air pressure
Barry walks from one end to the other of a 30-meter long moving walkway at a constant rate in 30 seconds, assisted by the walkway. When he reaches the end, he reverses direction and continue walking with the same speed, but this time it takes him 120 seconds because he is traveling against the direction of the moving walkway. If the walkway were to stop moving, how many seconds would it take Barry to walk from one end of the walkway to the other
Answers
Answer:
Δt=48 s
Explanation:
v: Barry's speed
v.: speed of the walkway
Δx=30 m
Δt1=30 s , Δt2=120 s
|Δx1|=|Δx2|
Δx=v*Δt
=> (v+v.)*30=(v-v.)*120
v=v.*5/3
30=(v+v.)*30
=> 30=(5v./3 +v.)*30
v.=3/8 m/s
v=5v./3 , v.=3/8
=> v=5/8 m/s
Δx=v*Δt
30=5/8 *Δt
Δt=48 s
Hello Guys! Could u help me with this question. Starting with an initial velocity of 2 m/s, Rohan pressed the accelerator of his car to attain a velocity of 12 m/s in 30s. Then he applies the brakes such that the car comes to rest in the next 15s. Calculate the acceleration of the car in both the cases.
Answers
A= 12-2 divided by 30 = ....
Second case :
A= 12-0 divided by 15 = ....
How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.
Answers
Answer:
they get closer together
Explanation:
calculate the magnitude of the electric field intensity in vacuum at a distance of 20 cm from a charge of 5 * 10 raise to power - 3 column
Answers
Answer:
1.1259*10^9 Newton per Columb
Explanation:
the magnitude of the electric field intensity can be calculated using the expresion below;
E=Kq/r^2
Where k= constant
q= electric charge
r=distance= 2cm= 20*10^-2m( we convert to m for unit consistency
:,K=59*10^9 Columb
If we substitute the value into above formula we have
E=(9*10^9)*(5*10^-3)/(20*10^-2)^2
=1.1259*10^9 Newton per Columb
Therefore,the magnitude of the electric field intensity in vacuum at a distance of 20 cm is 1.1259*10^9 Newton per Columb
A piano has a mass of 99 kg. What is the weight of the piano?
Answers
Explanation:
weight of the piano = mg
w = 99 x 10 =990 N
Imagine that your standing on a beach but cannot swim. Your friend encourages you to walk into the surf zone created by incoming deep-water waves that have a wavelength of 30 meters. Would it be safe to walk out to where the waves are breaking? Explain how you arrived at your answer.
Answers
Answer:
It would not be safe to walk out to where waves are breaking due to the effect of rip currents
Explanation:
The water depth in the surf zone is between 5 to 10 meters deep and with a wavelength of 30 meters, the speed of the wave is considerably fast such that control for safety may be difficult
Also the speed of the wave is directly related to the depth of the water which means that where the wave described above is fast as well as the rip current, also the water depth is expected to be considerable for a non swimmer
It is best to seek for sign post regarding safe areas and do not go into the water where there are no lifeguards or marked safe zones.
It won't be safe to walk out to where the waves are breaking.
This is because the wavelength is 30 meters which is a characteristic of
areas with significant water depth in the range of 5-11 meters.Under these
conditions the waves are usually very fast and may get swept with the
current from the water waves when trying to run from it.
It is recommended that we stay in areas where the depth is noted as not
being much and should always seek help and clarity from the life guards so
as to prevent drowning and death.
Read more on https://brainly.com/question/17125479
help me its emergency I need a correct answer please if you don't know then please dont guess
Answers
Answer:
True.
Explanation:
Total internal reflection is bound to occur when light travels from dense medium to less dense.
From the table given in the question above, we obtained:
Refractive Index of Crown glass = 1.52
Refractive Index of Asphalt = 1.635
From the above, Crown glass has a lower refractive index when compared to Asphalt. This means that Crown glass is less dense than Asphalt.
Therefore, total internal reflection will not occur when light travels from Crown glass to Asphalt because Crown glass is less dense than Asphalt.
Bruno the bat flies at a speed of 0.5 m/s in circle of radius 1 m. What is his acceleration?
Very urgent pls help
Answers
Answer:
Acceleration is 0.25m/s^2
Explanation:
Given the following :
Speed = 0.5m/s
Radius(r) of circle = 1m
Acceleration round a circular path is given as :
a = v^2 / r
Where
a = acceleration of the body
v = speed / velocity
r = radius
Therefore,
a = v^2 / r
a = (0.5)^2 / 1
a = 0.25m/s^2