Answer:
B. 122N
Explanation:
f = 0.15 x 83 x 9.8 = 122.01
f = 122N
Calculate the speed of a car that travels 355km in 15 hours , a good answer please
Answer:
23.67 km / hr
Explanation:
car travels 355 km (d)
duration = 15 hrs (t)
average speed formula = v = d / t
v = 355 km / 15 hr
v = 23.67 km / hr
Explanation:
Hello, there!!!
Here, your question is asking about the speed and the given are:
distance (s)= 355km
time (t) = 15hrs.
speed (v)=?
now,
we have the formula:
v= s/t
or, v = 335km /15 hrs.
Therefore, the speed of car was 23.67km/hr.
Hope it helps..
Janaki Temple and Pashupatinath Temple are increasing our pride how
Answer:
Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.
This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.
A river flows with a speed of 3km/h in still water. A man who can swim with a speed of 5km/h wishes to reach a point on the other bank just opposite to the starting point. In which direction should he put his strokes and how long will he take to cross the river of width 1.2km? Please try to provide a diagram and step by step explanation.
Answer:
Explanation:
Let the angle required be θ with direction opposite to current .
cos θ = 3 / 5
θ = 53° .
Resultant velocity towards the opposite side
= √ ( 5 ² - 3²)
= 4 km /h
distance covered = 1.2 km
time taken = 1.2 / 4 = .3 h
= 18 min .
Somebody help!?
13. The graph below represents the speed of a car vs. time. Circle the letter(s) with the lowest acceleration.
What is the acceleration? How do you know?
Answer:
acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities. The orientation of an object's acceleration is given by the orientation of the net force acting on that object.
Explanation:
Calculating acceleration involves dividing velocity by time — or in terms of SI units, dividing the meter per second [m/s] by the second [s]. Dividing distance by time twice is the same as dividing distance by the square of time. Thus the SI unit of acceleration is the meter per second squared .
Let's say that we have a pilot that is dropping a package from a plane that is flying horizontally at a constant speed. If we neglect air resistance when the package hits the ground what would be the horizontal location of the package with respect to the plane?
Answer:
The package will be directly below the location of the plane.
Explanation:
Look up projectile motion for more information. The horizontal speed of the package is separate from the vertical speed of the package. The vertical speed of the falling package will be based on the rate of acceleration and the height of the package when dropped. The horizontal speed of the package will be the same as the plane so the package will remain directly below the plane the entire time until the package hits the ground.
The horizontal location of the package with respect to the plane will be parallel to the plane if no air resistance act on it. The pack will be straight to down because of the gravity.
What is gravitational force?Gravitational force is the force by which an object attracts other objects into its center of mass. Earth attracts every objects in its surface towards its center that's why we are all standing on the ground.
The gravitational force acting on a body is dependent on its mass and height. From an object falling from a height will experience a positive acceleration downwards to the ground.
If any air resistance is present there, the path of motion of the falling object from the height might be changed randomly. Here, the package is falling from plane without any air resistance and it will be straight down to the plane.
To find more on gravitational force, refer here:
https://brainly.com/question/12528243
#SPJ5
A mass of 1.15 kg of air at 111 kPa and 27 C is contained in a gas-tight, frictionless piston cylinder device. The air is now compressed to a final pressure of 0.84 MPa. During this process, heat is transferred from the air such that the temperature inside the cylinder remains constant. Calculate the work input (in kJ) during this process.
Answer:
Work input W = -200.39 KJ
Explanation:
From the question, we are given;
m = 1.15 kg
Constant temperature T1 = T2 = 27 + 273 = 300k
Since the temperature is constant, we can say that the process is isothermal
P1 = 111 KPa
P2 = 0.84 MPa = 0.84 * 1000 KPa = 840 KPa
Now what we want to calculate is W1-2
Mathematically, for isothermal process;
W1-2 = mRTlnP1/P2
where R can be obtained from table and it is equal to 0.287 KJ/kg.k
Hence;
W1-2 = (1.15)(0.287)(300)(ln 111/840)
W1-2 = 99.015 * -2.023871690525 = -200.39 KJ
Kindly note that the value of the work is negative because work is done on the system and not by the system
A sports car moving at constant velocity travels 120m in 5.0s. If it then brakes and comes to a stop in 4.0s,what is the magnitude of it's acceleration?
✔ First calculating the speed :
V = d(in m)/t(in s)
V = 120/5 V = 24 m/s✔ You now know the average car's speed, is time it takes to stop it completely, so you can calculate its acceleration :
a = V/t
a = -24/4 a = 6 m/s² The car has an acceleration of 6 m/s².What does addition of two vectors give you?
Answer:
Explanation:
To add or subtract two vectors, add or subtract the corresponding components. Let →u=⟨u1,u2⟩ and →v=⟨v1,v2⟩ be two vectors. The sum of two or more vectors is called the resultant. The resultant of two vectors can be found using either the parallelogram method or the triangle method .
Suppose the position of an object moving in a straight line is given by s (t )equals 5 t cubed minus 2 t squared plus 9. Find the instantaneous velocity when tequals7.
Answer:
Explanation:
s(t) = 5t³-2t²+9
Instantaneous velocity v = ds / dt
v = ds/dt = 15t²-4t
Putting t = 7
v = 15 x 7² - 4 x 7
= 707
Instantaneous velocity at t = 7
is 707 unit .
The discharge of a stream is Choose one: likely to decrease downstream in arid regions and increase downstream in temperate regions. typically lower in spring than during summer. constant for the length of the stream. calculated by dividing its cross-sectional area by its velocity.
Answer:
likely to decrease downstream in arid regions and increase downstream in temperate regions
Explanation:
Arid regions are is a region with a severe lack of water, usually to the extent that affect the organisms living in the region. Arid regions are characterized by a very low depth of rainfall per year. Temperate region on the other hand experience more distinct seasonal change and wider temperature change. Temperate regions get a fairly large amount of rainfall per year.
In arid regions, the soil is very dry, and the rate of infiltration and percolation is high relative to the amount of rainfall available. The effect is that more water is infiltrated into the soil as you move downstream, leading to a decrease in the discharge of a stream as you move downstream. Most temperate region have soils that are usually saturated in the peak of the rainfall season, leading to a greater stream discharge as you move downstream.
explain why the term Nano is used to describe nanotechnology
Answer:
Nanotechnology means working with materials at the scale of one billionth of a metre.
Explanation:
The prefix “nano” refers to one billionth: it’s part of the scientific scale of measurement. Its science, engineering, and technology are conducted at the nanoscale, which is about 1 to 100 nanometers. Nanoscience and nanotechnology are the study and application of extremely small things. Thus, this describes why the term nano is used to describe nanotechnology.
I hope this helps :)
Answer:
Nanotechnology is technology that is about a nanometer in size, or between 1 nm and 100 nm.
Explanation:
its the sample response on edge 2021
Salt compounds are commonly used to melt ice that forms on sidewalks in the winter. A common chemical that is used to melt sidewalk ice is calcium chloride, CaCl2(s). When calcium chloride dissolves into solution is releases thermal energy which aides in melting
the ice.
The molar mass of water is 18.02 g/mol
The thermal energy, in kilojoules (kJ) that must be released from the calcium chloride,
CaCl2(s), to melt 10.0 kg of ice, expressed in scientific notation is a.bc x 104 k).
46
55
The values of a, b, c, and d.
Answer:
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
Explanation:
The quantity of heat needed to melt the ice is given by Q = mL where m = mass of ice and L = latent heat of fusion of ice = 334 kJ/kg. This quanity of heat is also the thermal energy needed to be released by the calcium chloride, CaCl₂
Now, the mass of ice = 10 kg. So,
Q = mL
Q = 10 kg × 334 kJ/kg
Q = 3340 kJ
In scientific notation,
Q = 3.34 × 10³ kJ
So the thermal energy needed to be released by the calcium chloride is 3.34 × 10³ kJ
Comparing Q = 3.34 × 10³ kJ with a.bc × [tex]10^{d}[/tex] kJ
So, a = 3, b = 3, c = 4 and d = 3
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
Please help me with this question ASAP.
In a a potentiometer circuit, a 1m long potentiometer wire PQ of resistance 10 ohms is connected in series with a cells of e.m.f. 9V with internal resistance 3 ohms Calculate:
i The p.d. across PQ
ii. The e.m.f. of a cell which has a balance point of 75cm.
Answer:
i. 6.923 V
ii. The e.m.f. = 22.5 V
Explanation:
i. The given parameters are;
Length of potentiometer = 1 m
The resistance of the potentiometer = 10 Ω
The e. m. f. of the attached cell = 9 V
The current, I flowing in the circuit = e. m. f/(Total resistance)
The current, I flowing in the circuit = 9 V/(10 + 3) = 9/13 A
The potential difference, p.d. across the 1 m potentiometer wire = I × Resistance of the potentiometer wire
The p.d. across the potentiometer wire = 9/13×10 = 90/13 = 6.923 V
ii) Given that the 1 m potentiometer wire has a resistance of 10 Ω, 75 cm which is 0.75 m will have an e.m.f. given by the following relation;
[tex]\dfrac{E}{R_{balance}} = \dfrac{V}{R_{cell}}[/tex]
Where:
E = e.m.f. of the balance point cell
[tex]R_{balance}[/tex] = Resistance of 75 cm of potentiometer wire = 0.75×10 = 7.5 Ω
[tex]R_{cell}[/tex] = Resistance of the cell in the circuit = 3 Ω
V = e.m.f. attached cell = 9 V
[tex]\dfrac{E}{7.5} = \dfrac{9}{3}[/tex]
E = 7.5*3 = 22.5 V
The e.m.f. = 22.5 V
Three books are at rest, in equilibrium, on a horizontal table as
shown. The weight of each book, which is equal to the force
gravity exerts in the downward direction, is given. What is the
net force on the middle book?
Answer:
Net force = 0
Explanation:
Short answer: if the middle book is not acceleration in any direction, the net force is zero.
Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero. Skills to draw FBD are essential in solving problems in statics.
Top book exerts -mg (downwards) on the middle book.
Middle book exerts -mg (downwards) on the bottom book.
Total downward force is -mg-mg = -2mg
By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.
This makes the net force of -2mg (downwards) + 2mg (upwards) =0
On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.
What is equilibrium?Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.
According to the question :
The net force is 0 if the middle book does not accelerate in any direction.
The Middle book is impacted negatively (downwards) by the top book.
The middle book pulls down on the lower book by -mg.
The total downward force is -2mg = (-mg-mg)
According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.
Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.
To get more information about Equilibrium :
https://brainly.com/question/28527601
#SPJ2
The density of water is 1000 kg m^3. What is the value expressed in gcm^-3 units? please help me..
(1) 1000 (2) 100 (3) 1 (4) 0.1 (5) 0.01
Here's the neat, cool way to convert units like this:
-- 1 kilogram = 1,000 grams
-- 1 meter = 100 centimeters
So . . . . .
(1000 kg/m³) x (1000 g/kg) x (1 m/100 cm)³ =
(1,000 kg/m³) x (1,000 g/kg) x (1 m³/1,000,000 cm³) =
(1,000 x 1,000 x 1 / 1,000,000) (kg-g-m³ / m³-kg-cm³) = 1 g/cm³
The gas in a balloon has T=280K and V=0.0279m^3. If the temperature increases to 320K at constant pressure, what is the new volume of the balloon? (Hint: n and P are constant) (Unit= m^3)
Answer:
[tex]\boxed{ V_{2}= 0.03189 m^3}[/tex]
Explanation:
According to Charles Law
=> [tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex]
Where [tex]V_{1}[/tex] = 0.0279 m³, [tex]T_{1}[/tex] = 280 K and [tex]T_{2}[/tex] = 320 K
=> [tex]\frac{0.0279}{280} = \frac{V_{2}}{320}[/tex]
=> [tex]V_{2}[/tex] = 0.03189 m³
Law of conservation
of momentum
Answer:
Explanation:
Law of conservation of momentum is applied in solving collision problem. When two body collides, their momentum after collision can be determined using the law.
The law States that the sum of momentum of two bodies before collision is equal to the sum of their momentum after collision. Before collision, both bodies moves with a different velocity while during some cases, the bodies moves with a common velocity after collision.
Whether they move with or without the same velocity depends on the type of collision that exists between them after the collision. After collision, some object sticks together and move with a common velocity while some doesn't.
If the bodies sticks together after collision, the type of collision that occur is inelastic (energy is not conserved) and if they splits after collision, the type of collision that occur is an elastic collision (energy is conserved).
Let m1 and m2 be the masses of the bodies
u1 and u2 be their velocities before collision
v1 and v2 be their velocities after collision.
According to the law;
m1u1 + m2u2 = m1v1 + m2v2
Note that momentum = mass × velocity of the body.
In a given chemical reaction the time energy of the products is less than the energy of the reactants which statements is true for this chemical reaction
Answer:
Energy is released in this reaction possibly in the form of heat thus it is an exergonic and or exothermic reaction.
Explanation:
The energy is sometimes transferred as heat, inflicting the reaction mixture and its surroundings to become hotter. The temperature increase may be detected employing a measuring device. Some samples of exothermic reactions are: Combustion .An chemical reaction may be a chemical process that releases energy by lightweight or heat
Hope this helps...
Have a nice day!!!!
A car engine burns gas at 495 K and exhausts to the air at 293 K. What is the highest possible efficiency it could have?
(NO UNIT)
Answer:
59.19%
Explanation:
Step 1:
Data obtained from the question. This include the following:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Step 2:
Determination of the efficiency of the engine.
Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:
Efficiency = output /input x 100
With the above formula, we can calculate the efficiency of the engine as follow:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Efficiency = output /input x 100
Efficiency = 293/495 x 100
Efficiency = 59.19%
Therefore, the efficiency of the engine is 59.19%
Answer:
0.41
Explanation:
Trust me bro
Culture creates the context for behavior in society. true or false
Answer:
True every culture is diffrent and culture is the way to grow up, the people or things you live around, or the ways of life you follow or dress.
Explanation: The definition of culture is: means a particular set of customs, morals, codes and traditions from a specific time and place. All of that develops how a person may behave in society.
Answer:
true
Explanation:
just took the quiz
Light travels 300 000 000 m/s and one year has approximately 32 000 000 second a light year is the distance light travels in one year
Explanation:
It is given that,
Speed of light, [tex]v=300 000 000\ m/s=3\times 10^8\ m/s[/tex]
Seconds in 1 year, [tex]t=32 000 000=32\times 10^6\ s[/tex]
We need to find the distance traveled by light in one year. Speed of an object is given by :
[tex]v=\dfrac{d}{t}[/tex]
So,
[tex]d=v\times t\\\\d=3\times 10^8\times 32\times 10^6\\\\d=9.6\times 10^{15}\ m[/tex]
Since,
[tex]1\ \text{light year}=9.46\times 10^{15}\ m\\\\1\ m=\dfrac{1}{9.46\times 10^{15}}\ \text{ly}\\\\9.6\times 10^{15}\ m=\dfrac{9.6\times 10^{15}}{9.46\times 10^{15}}\\\\d=1.01\ \text{ly}[/tex]
So, the distance covered by light is 1.01 light years.
What is the wavelength of the following waves?
Answer:
i. the wavelength is 7.2 m
ii. the wavelength is 2.4 m
Explanation:
the wavelength of a wave is from crest to crest or from trough to trough.
Is The force of friction always opposite to the motion?
Answer:
Friction force always acts tangent to the surface at points of contact. Friction force acts opposite to the direction of motion.
Explanation:
Sally is concerned about the X-ray images her dentist plans to take of her teeth. She has read that X-rays can cause tissue effects, such as skin reddening and hair loss. Which statement would best inform Sally of the level of risk
Answer:
B. The dentist uses X-ray radiography, which takes too short a time to cause those problems.
Explanation:
The statement B would best inform Sally of the level of risk. The dentist uses X-ray radiography, which takes too short a time to cause those problems and risk.
What is X-ray imaging?X-ray imaging provides images of human internal organs. The photos depict your body parts in various colors of black and white.
Because various tissues absorb varying quantities of radiation, this is the case. Because calcium absorbs the most x-rays, bones appear white.
When X-ray radiation passes into our bodies, it damages molecular structures and may cause injury.
Human cells are damaged by extremely high doses of radiation, as indicated by skin burns, hair loss, and an increased risk of cancer.
Sally is concerned about the X-ray images her dentist plans to take of her teeth. She has read that X-rays can cause tissue effects, such as skin reddening and hair loss.
The statement B would best inform Sally about the level of risk. The dentist uses X-ray radiography, which takes too short a time to cause those problems and risk.
Hence, statement B would best inform Sally about the level of risk.
To learn more about the X-ray imaging, refer to the link;
https://brainly.com/question/27425971
#SPJ2
A vat of nitrogen at its boiling point (-196 degrees C) absorbs 384000 J of heat. How much mass of nitrogen burns off? (Unit = kg)
Answer:
1.92 kg of nitrogen.
Explanation:
The following data were obtained from the question:
Heat absorbed (Q) = 384000 J
Note: Heat of vaporisation (ΔHv) of nitrogen = 5600 J/mol
Next, we shall determine the number of mole of nitrogen that absorbed 384000 J.
This is illustrated below:
Q = mol·ΔHv
384000 = mole of N2 x 5600
Divide both side by 5600
Mole of N2 = 384000/5600
Mole of N2 = 68.57 moles
Next, we shall convert 68.57 moles of nitrogen, N2 to grams.
This can be obtained as follow:
Molar mass of N2 = 2 x 14 = 28 g/mol.
Mole of N2 = 68.57 moles.
Mass of N2 =..?
Mole = mass /molar mass
68.57 = mass of N2 /28
Cross multiply
Mass of N2 = 68.57 x 28
Mass of N2 = 1919.96 g
Finally, we shall convert 1919.96 g to kilograms.
This can be achieved as shown below:
1000g = 1 kg
Therefore,
1919.96 g = 1919.96/1000 = 1.92 kg.
Therefore, 1.92 kg of nitrogen were burned off.
Answer:
Explanation:
i cheat on Acellus cause I dont care about school. If i did I would be going to public school... Im never gonna use this info in my life so I dont bother learning it.
Which of the following statements describes nucleons?
A. Nucleons are the particles that make up a nucleus.
B. Nucleons are the particles in an atom that are neutral.
C. Nucleons are the particles that make up an atom.
D. Nucleons are the particles in an atom that have a charge.
Answer: nucleons are the particles that make up in nucleus
Explanation:
Nucleons are the particles that make up a nucleus, and they include protons and neutrons.
What are nucleons?Nucleons are particles that make up nucleus of an atom. They include either proton or neutron, or both found in atomic nucleus.
Generally, nucleons are subatomic particles found within nucleus of an atom.
Therefore, we can conclude that, nucleons are the particles that make up a nucleus.
Learn more about nucleons here: https://brainly.com/question/12582292
#SPJ2
What force is required to give an object with mass 300 kg an acceleration of 2
m/s2?
O A. 300 N
O B. 1200 N
O C. 600 N
O D. 150 N
Answer:
C. 600 N
Explanation:
Given,
mass of object (m)= 300kg
acceleration(a) =2m/s^2
We know that,
Force(F)=ma
=300*2
=600N
So,600N force is required to give an object.
Answer:
600 N
Explanation:
aye pecks
Two men, Joel and Jerry, each pushes an object that are identical on a horizontal frictionless floor starting from rest. Joel and Jerry are using the same force F. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do.
Answer:
The work done by Joel is greater than the work done by Jerry.
Explanation:
Let suppose that forces are parallel or antiparallel to the direction of motion. Given that Joel and Jerry exert constant forces on the object, the definition of work can be simplified as:
[tex]W = F\cdot \Delta s[/tex]
Where:
[tex]W[/tex] - Work, measured in joules.
[tex]F[/tex] - Force exerted on the object, measured in newtons.
[tex]\Delta s[/tex] - Travelled distance by the object, measured in meters.
During the first 10 minutes, the net work exerted on the object is zero. That is:
[tex]W_{net} = W_{Joel} - W_{Jerry}[/tex]
[tex]W_{net} = F\cdot \Delta s - F\cdot \Delta s[/tex]
[tex]W_{net} = (F-F)\cdot \Delta s[/tex]
[tex]W_{net} = 0\cdot \Delta s[/tex]
[tex]W_{net} = 0\,J[/tex]
In exchange, the net work in the next 5 minutes is the work done by Joel on the object:
[tex]W_{net} = W_{Joel}[/tex]
[tex]W_{net} = F\cdot \Delta s[/tex]
Hence, the work done by Joel is greater than the work done by Jerry.
when vector contains distance and direction it also known as
When vector contain distance and direction it is also known as displacement .
Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus
Answer:
The neutron is a subatomic particle, symbol
n
or
n0
, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.
Explanation:
pls mark me as BRAINLIEST