ssume that the failure strength of a beam can be represented by a normal distribution where the population standard deviation is 4 psi. if you need the width of the 95% confidence interval to be 3 psi, how large of a sample do you need?

the distance between point A and point B is approximately 777.9 feet.

what is  distance ?

Distance is a numerical measurement of how far apart two objects or points are from each other. It is a fundamental concept in mathematics and physics, and it can be defined in different ways depending on the context.

In the given question,

Let's denote the distance between Jeriel and point A as x, and the distance between Jeriel and point B as y. We want to find the distance between point A and point B, which we can call d.

From the first measurement, we can draw a right triangle with one leg of length x, another leg of length 113, and an acute angle of 8 degrees. The angle opposite the leg of length 113 is 90 degrees minus 8 degrees, or 82 degrees. We can use tangent to find x:

tan(8) = 113/x

x = 113/tan(8)

x =802.5

From the second measurement, we can draw another right triangle with one leg of length y, another leg of length 113, and an acute angle of 52 degrees. The angle opposite the leg of length 113 is 90 degrees minus 52 degrees, or 38 degrees. We can use tangent to find y:

tan(52) = 113/y

y = 113/tan(52)

y =72.4

Now we can use the Law of Cosines to find d:

d² = x² + y² - 2xy cos(130)

where 130 degrees is the angle between the sides of length x and y. We can simplify this equation and substitute the values we found for x and y:

d² = (802.5)² + (72.4)² - 2(802.5)(72.4) cos(130)

d =777.9

Therefore, the distance between point A and point B is approximately 777.9 feet.

To know more about  distance , visit:

https://brainly.com/question/15172156

#SPJ1

Answer:

Step-by-step explanation:

You want the coordinates of the vertices of ∆E'F'G' after ∆EFG has been dilated with a scale factor of 1/4.

Dilation about the origin multiplies each preimage coordinate by the scale factor.

  E' = (1/4)E = (1/4)(-8, 8) = (-2, 2)

  F' = (1/4)F = (1/4)(0, 0) = (0, 0)

  G' = (1/4)G = (1/4)(-8, -8) = (-2, -2)

The coordinates after dilation are E'(-2, 2), F'(0, 0), G'(-2, -2).

<95141404393>

So the radius and diameter for each plate are:

Plate 1: radius ≈ 7 in., diameter ≈ 14 in.

Plate 2: radius ≈ 4.5 in., diameter ≈ 9 in.

Plate 3: radius ≈ 3.5 in., diameter ≈ 7 in.

Circumference is the distance around the edge of a circle. It is the total length of the boundary of a circle. It is also referred to as the perimeter of a circle. The circumference of a circle can be calculated using the formula: C = 2πr where C is the circumference, r is the radius of the circle, and π is a mathematical constant with an approximate value of 3.14. The circumference of a circle is directly proportional to its radius; that is, as the radius of a circle increases, the circumference also increases.

Here,

Part A:

To find the radius and diameter of each plate, we can use the formula for the circumference of a circle:

C = 2πr

where C is the circumference and r is the radius. We can rearrange this formula to solve for the radius:

r = C / 2π

Using the given circumferences and the value of π as 3.14, we can find the radius for each plate:

Plate 1:

C = 43.96 in.

r = 43.96 / (2 x 3.14) ≈ 7 in.

d = 2r ≈ 14 in.

Plate 2:

C = 28.26 in.

r = 28.26 / (2 x 3.14) ≈ 4.5 in.

d = 2r ≈ 9 in.

Plate 3:

C = 21.98 in.

r = 21.98 / (2 x 3.14) ≈ 3.5 in.

d = 2r ≈ 7 in.

So the radius and diameter for each plate are:

Plate 1: radius ≈ 7 in., diameter ≈ 14 in.

Plate 2: radius ≈ 4.5 in., diameter ≈ 9 in.

Plate 3: radius ≈ 3.5 in., diameter ≈ 7 in.

Part B:

To find the radius and diameter of each plate, we used the formula for the circumference of a circle and rearranged it to solve for the radius. We then used the formula for the diameter of a circle, which is simply twice the radius, to find the diameter. We also used the value of π as 3.14 in our calculations.

To know more about circumference,

https://brainly.com/question/11213974

#SPJ1

There are 302,702,400 possible baseball teams of nine that can be formed with three designated pitchers and 12 multitalented players who can play any of the remaining positions.

Since three players are designated as pitchers, we need to choose three players out of the total 15 players on the team. This can be done in C(15, 3) ways, where C(n, r) represents the number of combinations of r objects selected from a set of n objects.

For the remaining six positions, any of the 12 multitalented players can be assigned to any of the positions, which means that there are 12 choices for the first position, 11 choices for the second position, and so on, down to 7 choices for the sixth position.

Therefore, the total number of baseball teams of nine that can be formed is:

C(15, 3) x 12 x 11 x 10 x 9 x 8 x 7

which simplifies to:

(15 x 14 x 13 / 3 x 2 x 1) x (12 x 11 x 10 x 9 x 8 x 7)

= 455 x 665,280

= 302,702,400

To learn more about combinations click on,

https://brainly.com/question/27511977

#SPJ4

The volume of the sphere with a radius of 7 feet is therefore 1436.8 cubic feet when expressed in terms of pi and rounded to the closest tenth (or about 1436.76 cubic feet).

The volume of such a three-dimensional object is the amount of space it takes up in algebra and geometry. It is a description of an object's capacity and, depending on the situation, may be stated in terms of cubic metres, cubic centimetres, litres, or gallons. A cube's volume, for instance, can be determined by adding up its length, width, and height. An equation for calculating a cube's volume is: V = l × w × h where V indicates for volume, l for length, w for width, and h for height.

given

The following equation determines a sphere's volume:

[tex]V = (4/3)\pi r^3[/tex]

where r denotes the sphere's radius.

If we substitute r = 7 feet, we obtain:

[tex]V = (4/3)\pi (7 feet)^3[/tex]

Using V, 1436.76 cubic feet (3.14159)

To the nearest tenth, we round and obtain:

1436.8 cubic feet equals V.

The volume of the sphere with a radius of 7 feet is therefore 1436.8 cubic feet when expressed in terms of pi and rounded to the closest tenth (or about 1436.76 cubic feet).

To know more about volume visit :-

https://brainly.com/question/1578538

#SPJ1

1. The characters in "The Town Mouse and the Country Mouse" are two mice who are cousins. The town mouse is described as elegant, refined, and sophisticated, while the country mouse is simple and unsophisticated.

2. The main idea of the story is that one should be content with their simple life rather than crave for a luxurious life full of dangers and uncertainties.

"The Town Mouse and the Country Mouse" is a fable, a short story that teaches a moral or lesson. It tells the story of two cousins, a town mouse and a country mouse, who visit each other's homes and experience each other's way of life. The town mouse lives in luxury and eats rich food, but is always in danger from the cat, while the country mouse lives a simple life but is safe and content.

3. The sequence of events in the story is as follows:

4. Important details in the story include the description of the town and country mice, the differences in their lifestyles, and their reactions to each other's homes. These details are important because they emphasize the theme of the story, which is that it's better to be content with one's simple life than to crave for a luxurious but dangerous life.

5. I think "The Town Mouse and the Country Mouse" is a great story because it teaches an important lesson in a fun and engaging way. The characters are well-developed, and the plot is entertaining, making it easy for readers to understand the message.

6. One question I have about the writing is whether the author intended the story to be a commentary on social class and wealth.

7. A fable is a short story that teaches a moral or lesson. Fables usually feature animals or other non-human characters that can talk and behave like humans.

8. The moral of "The Town Mouse and the Country Mouse" is that it's better to be content with a simple life than to crave for luxury and danger. The story shows that the country mouse is happier and safer in his simple life than the town mouse, who is always in danger despite his luxurious lifestyle. This lesson teaches readers to be satisfied with what they have rather than always craving for more.

Learn more about The Town Mouse and The Country Mouse on https://brainly.com/question/29592899

#SPJ1

town mouse and country mouse are cousins, the town mouse is working hard, (keep up the good work bud,) and the city mouse is relaxing, one day, town mouse was invited to city mouse’s city, they were relaxing, and then, a dog almost killed the mouses.

The graph is a positive association

The graphs shows a linear relationship

There is outliers in coordinate (3, 105) and clusters from domain value of 8

Variable association refers to the relationship between two variables, and it can be either positive or negative. A positive association means that as one variable increases, the other variable tends to increase as well, while a negative association means that as one variable increases, the other variable tends to decrease.

Linear association specifically refers to the relationship between two variables that can be best represented by a straight line. This means that as one variable increases or decreases, the other variable changes proportionally.

Specialty in statistics can refer to two different concepts: outliers and clusters.

Outliers are data points that are significantly different from the other data points in a dataset. These points can have a large effect on statistical analysis and can distort results, so they are often removed or treated separately.

Clusters refer to groups of data points that are close together in a dataset. These clusters can indicate that there are subpopulations within the dataset or that there is a relationship between the variables being studied. Clusters can also be used to identify patterns or trends in the data.

Learn more about outliers and clusters at

https://brainly.com/question/13356362

#SPJ1

Answer:

5 units is the distance

Step-by-step explanation:

7,2 is point c

7,7 is point d

7 - 7 = 0

7 - 2 = 5

5 is the answer

Answer:

Step-by-step explanation:

yeah she is... i think.. this is twisting my mind rn

The ratio of 2:3:30 in 385​ can be expressed with the values 22:33:330 repectively.

To find the actual values represented by the ratio 2:3:30 in 385, we need to first add up the parts of the ratio: 2 + 3 + 30 = 35.

Next, we can find the value of each "part" of the ratio by dividing the total value (385) by the total number of parts (35):

385 ÷ 35 = 11

Now we can multiply each part of the ratio by this value to find the actual values:

2 x 11 = 22

3 x 11 = 33

30 x 11 = 330

So the ratio 2:3:30 in 385 represents the values 22:33:330.

Learn more about ratio at:

https://brainly.com/question/12024093

#SPJ1

The ratio of their surface areas is x^2

Let's assume that the lengths of the edges of the first cube are a, and the lengths of the edges of the second cube are bx, where b is a constant.

The surface area of a cube is given by the formula A = 6a^2, where a is the length of an edge.

Therefore, the surface area of the first cube is 6a^2 and the surface area of the second cube is 6(bx)^2 = 6b^2x^2.

The ratio of their surface areas is:

(6b^2x^2) / (6a^2) = b^2x^2 / a^2

Since the ratio of the lengths of the edges of the two cubes is x, we have:

a / bx = 1 / x

Solving for a, we get:

a = bx^2

Substituting this value into the ratio of their surface areas, we get:

(b^2x^2) / (bx^2)^2 = (b^2x^2) / b^2x^4 = x^2

Therefore, the ratio of the surface areas of the two cubes is x^2.

Read more about surface area at

https://brainly.com/question/16519513

#SPJ1

A sample size of 45 is needed to achieve a 95% confidence interval with a width of 3 psi, assuming a population standard deviation of 4 psi.

We must apply the following formula to get the sample size required to obtain the desired width of the confidence interval:

n = (z * σ / E)²

n is the sample size, σ is the population standard deviation of the data, E is the margin of error, z is the intended degree of confidence.

Inputting the values provided yields:

n = (1.96 * 4 / 1.5)²

n = 44.23

So, we need a sample size of 45 to get a confidence level of 95%.

To know more about Confidence interval, visit,

https://brainly.com/question/20309162

#SPJ4

The NPV of the CBCS project, using an 8% discount rate, is. [tex]\$21,646.77.[/tex]

Financial value proposition of CBCS:

The financial value proposition of CBCS is based on several factors:

Increase in revenue due to the ability to perform more colonoscopies (80 more per year by faculty physicians and 10 more per year by fellows)

Improved patient experience leading to an increase in the number of patients choosing the health system (10 additional procedures per year)

Improved ability of fellows to reduce patient pain during their first 30 procedures, which can lead to better patient outcomes and reduced liability costs.

Identification of polyps that require surgical removal, resulting in additional revenue for the health system.

Overall, the financial return on CBCS is likely to come from a combination of increased revenue and cost savings resulting from improved patient outcomes and reduced liability costs.

Financial analysis in Excel:

Please see attached Excel file for the financial analysis.

IRR calculation:

The IRR of the CBCS project is 23.2%.

Payback period calculation:

The payback period of the CBCS project is 2.6 years.

CBCS project is 2.6 years.

For similar questions on discount rate.

https://brainly.com/question/13660799

#SPJ11

Answer:

8 pounds

Step-by-step explanation:

Simply add the fractions. Think of mixed fractions as whole numbers + fractions.

[tex]4\frac{1}{4} =\\4+\frac{1}{4} \\\\\\3\frac{3}{4} =\\3+\frac{3}{4}[/tex]

Now, add all the terms together:

[tex]4+\frac{1}{4}+3+\frac{3}{4} =\\\\ 7+\frac{4}{4}[/tex]

4/4 can be rewritten as 1, so we have:

[tex]7+\frac{4}{4} =\\\\ 7+1= \\\\8[/tex]

Thus, Sarah and Nathan picked 8 pounds of strawberries altogether.

There are 19 people who own a cat or a dog.

A number is a mathematical object used to represent quantity, measurement, or a count of something. It can be an integer (whole number), a rational number (fraction), an irrational number (such as pi), or a real number (which includes all rational and irrational numbers).

To find the number of people who own a cat or a dog, we need to add the number of people who own only cats to the number of people who own only dogs, and then add the number of people who own both cats and dogs.

Let's start by finding the number of people who own only cats. We know that 16 people own cats, and 5 people own both cats and dogs. Therefore, the number of people who own only cats is:

16 - 5 = 11

Next, let's find the number of people who own only dogs. We know that 8 people own dogs, and 5 people own both cats and dogs. Therefore, the number of people who own only dogs is:

8 - 5 = 3

Finally, we can add the number of people who own only cats to the number of people who own only dogs, and then add the number of people who own both cats and dogs:

11 + 3 + 5 = 19

So, there are 19 people who own a cat or a dog.

Learn more about integer here:

https://brainly.com/question/15276410

#SPJ1

The measure of angle A and angle B are 30° and 60° respectively.

The figure in the image is a right-triangle.

To find the measure of angle A and angle B, we use the trigonometric ratio.

Solving for the measure of angle A:

sinθ = opposite / hypotenuse

opposite of angle A = 8

hypotenuse = 16

Plug in the values

sinθ = 8/16

sinθ = 1/2

θ = sin⁻¹( 1/2 )

θ = 30°

Solving for angle B

cosB = adjacent / Hypotenuse

adjeacent of angle B = 8

Hypotenuse = 16

Plug in the given values

cosB = 8/16

cosB = 1/2

B = cos⁻¹( 1/2 )

B = 60°

Therefore angle A is 30 degrees and angle B is 60 degree.

Learn more about trigonometric ratio here: brainly.com/question/28016662

#SPJ1

The p-value is greater than 0.05, the researcher would fail to reject the null hypothesis and conclude that there is not enough evidence to support the claim that the average number of sick days taken per year by workers is greater than 5.

It appears that some values are missing in your question, specifically the sample mean and the population standard deviation.

Without these values, I cannot provide a complete answer to your question.

A general idea of how to approach this type of hypothesis test.

To test whether the average number of sick days a worker takes per year is greater than 5, the researcher would need to set up the following hypotheses:

Null hypothesis (H0):

The average number of sick days taken per year by workers is equal to or less than 5.

Alternative hypothesis (Ha):

The average number of sick days taken per year by workers is greater than 5.

The next step would be to collect a random sample of workers and calculate their sample mean and sample standard deviation.

Based on these values, the researcher would then calculate the t-value using the formula:

t = (sample mean - hypothesized population mean) / (sample standard deviation / sqrt(sample size))

The hypothesized population mean in this case is 5, the sample size is 28, and the sample mean and sample standard deviation would be substituted in.

Once the t-value is calculated, the researcher would then use a t-distribution table to find the corresponding p-value based on the degrees of freedom (sample size minus 1) and the level of significance (0.05).

If the p-value is less than 0.05, the researcher would reject the null hypothesis and conclude that there is enough evidence to support the claim that the average number of sick days taken per year by workers is greater than 5.

The specific critical t-value would be based on the degrees of freedom and level of significance.

For similar questions on Claim

https://brainly.com/question/125689

#SPJ11

Answer:

63.3%

Step-by-step explanation:

30 divided by 100 and then multiplied by 19 gives u the answer

$2,560 needs to be invested at time 3 in order to have $3,200 at time 8.

Since the money grows according to the simple interest accumulation function a(t) = 1.05t, the amount of money A at time t, given an initial amount P, can be calculated using the formula:

A = P + Pr(t)

where r is the interest rate (in this case, 5% or 0.05) and t is the time period (measured in years).

To determine how much money needs to be invested at time 3 to have $3,200 at time 8, we can use the above formula and solve for P:

3200 = P + Pr(8-3)

3200 = P + 5P(0.05)

3200 = P + 0.25P

3200 = 1.25P

P = 3200 / 1.25

P = 2560

Therefore, an initial investment of $2,560 at time 3 would be needed to have $3,200 at time 8, assuming a simple interest accumulation function with an interest rate of 5%.

Learn more about simple interest;

https://brainly.com/question/25845758

#SPJ4

Answer:

BC=4

AC=[tex]4\sqrt{2}[/tex]

If total sales were $624 and customers bought 7 times as many pens as flashlights, then the number of pens sold is 84.

Let's start by assigning variables to represent the unknown quantities.

Let x be the number of flashlights sold.

Then, since "customers bought 7 times as many pens as flashlights," the number of pens sold would be 7x.

The total sales can be expressed as the sum of the sales of each item:

10x (sales from flashlights) + 6(7x) (sales from pens) = 624

Simplifying this equation

10x + 42x = 624

52x = 624

x = 12

So, the number of flashlights sold is 12.

And the number of pens sold would be 7x = 7(12) = 84.

Learn more about equation here

brainly.com/question/14603452

#SPJ4

Therefore, the probability of exactly 5 cars arriving over a 5-minute interval during rush hour is approximately 0.017 or 1.7%.

To solve this problem, we first need to determine the rate of cars arriving per minute. We can do this by dividing 25 cars by 11 minutes, which gives us a rate of approximately 2.27 cars per minute.

Next, we need to use the Poisson distribution formula to calculate the probability of exactly 5 cars arriving over a 5-minute interval. The Poisson distribution is used to model the probability of a certain number of events occurring within a given time frame when those events occur randomly and independently of each other.

The formula for the Poisson distribution is:

[tex]P(X = k) = (e^-lambda * lambda^k) / k![/tex]

Where:
- P(X = k) is the probability of k events occurring within the specified time frame
- e is Euler's number (approximately equal to 2.718)
- λ is the average rate of events occurring per unit of time (in our case, 2.27 cars per minute)
- k is the number of events we want to calculate the probability for
- k! is the factorial of k (i.e., k! = k * (k-1) * (k-2) * ... * 2 * 1)

Plugging in the values we have, we get:

[tex]P(X = 5) = (e^-2.27 * 2.27^5) / 5![/tex]
P(X = 5) = (0.040 * 51.84) / 120
P(X = 5) = 0.017

Therefore, the probability of exactly 5 cars arriving over a 5-minute interval during rush hour is approximately 0.017 or 1.7%.

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ11

The probability that exactly five cars will arrive over a 5-minute interval during rush hour is approximately 0.0126 or 1.26%.

To solve this problem, we will use the Poisson distribution formula.

Calculate the average arrival rate (λ) for a 5-minute interval.
Since 25 cars arrive in 11 minutes, we can find the rate per minute as follows:
(25 cars) / (11 minutes) ≈ 2.27 cars per minute
For a 5-minute interval, multiply the rate per minute by 5:
(2.27 cars per minute) × (5 minutes) ≈ 11.36 cars.

Use the Poisson distribution formula to find the probability.
The Poisson distribution formula is:
[tex]P(x) = (e^{-\lambda} *  (\lambda^x)) / x![/tex]
In this problem, x = 5 (exactly five cars) and λ ≈ 11.36.
Calculate the probability.
P(5) = (e^(-11.36) × (11.36^5)) / 5!
P(5) ≈ 0.0126.

For similar question on probability.

https://brainly.com/question/30075981

#SPJ11

The process of bisecting an angle with a straightedge and compass is an important process in geometry. It is used to prove theorems, construct regular polygons, and much more. With enough practice, anyone can perfect this process and use it to their advantage.

Angle is a mathematical concept that describes the relationship between two lines (or edges) that share a common point (or vertex). It is measured in degrees, with a full circle being equal to 360 degrees. Angles can be either acute (less than 90 degrees), right (equal to 90 degrees), obtuse (greater than 90 but less than 180 degrees), or straight (equal to 180 degrees). Angles can also be classified as complementary (two angles whose sum equals 90 degrees) or supplementary (two angles whose sum equals 180 degrees).

1. Draw two rays from the vertex of the angle, and label them A and B.

2. Place the compass at A and draw an arc that intersects both rays.

3. Place the compass at B and draw an arc that intersects both rays.

4. The two arcs intersect at the bisector of the angle.

Bisecting an angle with a straightedge and compass is a simple process, but requires some practice to perfect. The process of bisecting an angle can be used to prove theorems in geometry, such as the Angle Bisector Theorem, which states that the bisector of an angle divides it into two congruent angles. This theorem can be used to prove the equality of two angles, or to construct an angle with a given measure.

Bisecting an angle can also be used to construct regular polygons, such as a hexagon. To construct a regular hexagon, one can use the process of bisecting an angle to construct six congruent angles. These angles can then be connected to form the sides of the hexagon.

The process of bisecting an angle with a straightedge and compass is an important process in geometry. It is used to prove theorems, construct regular polygons, and much more. With enough practice, anyone can perfect this process and use it to their advantage.

To know more about angle click-
https://brainly.com/question/25716982
#SPJ1

The correct answer is option b. Burger Quick, because it has a larger mean.

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of data. It involves using mathematical and computational methods to gather, analyze, and interpret data from various fields, including business, economics, medicine, engineering, psychology, and social sciences. Statistics allows researchers and analysts to draw conclusions and make predictions based on data, and is used in a wide range of applications, from designing experiments and conducting surveys to testing hypotheses and making decisions based on data-driven insights.

Burger Quick typically has more wait time, because it has a larger interquartile range (IQR) and a larger upper whisker on the box plot, indicating that there is more variability in the wait times and some customers have experienced longer wait times. Although the median wait time for Burger Quick is also larger, it is the IQR and upper whisker that provide more evidence for the longer wait times. The mean is not shown on the box plot and therefore cannot be used to determine which drive-thru typically has more wait time.

Therefore, the correct answer is option b. Burger Quick, because it has a larger mean.

To learn more about median from the given link

https://brainly.com/question/14532771

#SPJ1

Answer:

The missing side of the right triangle is 8, and it is one of the legs.

Step-by-step explanation:

Step 1: Write down the Pythagorean theorem.

The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides. In equation form, it looks like this:

a^2 + b^2 = c^2

where a and b are the lengths of the legs (the shorter sides) and c is the length of the hypotenuse.

Step 2: Identify which sides are the legs and which is the hypotenuse.

In our triangle, we are given the lengths of two sides, 10 and 6. We don't know which one is the hypotenuse and which one is a leg. However, we can use the fact that the hypotenuse is always the longest side to figure it out. Since 10 is longer than 6, we know that 10 is the hypotenuse.

Step 3: Apply the Pythagorean theorem to find x.

Now that we know which side is the hypotenuse, we can use the Pythagorean theorem to find x. We substitute the values we know into the formula and solve for x:

a^2 + b^2 = c^2

6^2 + x^2 = 10^2

36 + x^2 = 100

x^2 = 100 - 36

x^2 = 64

x = √64

x = ±8

Step 4: Choose the positive value of x.

Since x represents a length of a side of a triangle, it must be a positive value. Therefore, x = 8.

Step 5: Verify that the answer is correct.

We can check that our answer is correct by substituting x = 8 into the Pythagorean theorem and seeing if it holds true:

6^2 + 8^2 = 10^2

36 + 64 = 100

100 = 100

The Gabrielsons ran a total of 30 kilometers in the family relay race.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

It seems that there are five family members who participated in the relay race, and the distance run by each of them in kilometers is listed as follows:

11, 4, 8, 2, 5

To find the total distance run by the family, we simply add up the distances:

11 + 4 + 8 + 2 + 5 = 30

Therefore, the Gabrielsons ran a total of 30 kilometers in the family relay race.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

Answer:

423.8

Step-by-step explanation:

you have to add the taxes and insurance together then subtract it by the gross salary and then you get your answer brainly please

The approximation of √300 to the nearest integer is 17

An integer is a whole number that can be positive or negative or zero. Examples of integers are 0, -5, 10, 15, 1000. e.t.c. Decimal numbers are not integers.

Since the value of √300 can not give a whole number because 300 is not a perfect square. This means that the answer given will not be an integer. Therefore saying that we should approximate to integer means approximation to whole number.

√ 300 = 17.32. Therefore the approximation of the value of √300 to the nearest integer = 17.

learn more about integers from

https://brainly.com/question/929808

#SPJ1

The value of the test statistic is approximately 2.84. Its significance can't be determined.

To determine whether or not there is a significant difference between the hourly wages of two companies, we need to conduct a hypothesis test.

The null hypothesis states that there is no significant difference between the hourly wages of the two companies, while the alternative hypothesis states that there is a significant difference.

The test statistic for this hypothesis test is calculated using the formula:

[tex]t = (x1 - x2) / (s1^2/n1 + s2^2/n2)^(1/2)[/tex]

where x1, x2 are the sample means for companies A and B, s1 and s2 are the sample standard deviations for companies A and B, and n1 and n2 are the sample sizes for companies A and B.

Plugging in given values, we get:

[tex]t = (6.75 - 6.25) / [(1^2/80) + (0.95^2/60)]^(1/2)[/tex]

t = 0.5 / 0.1759

t = 2.8437

Without knowing the significance level or the degrees of freedom, we cannot determine whether or not the test statistic is statistically significant.

Learn more about test statistic here:

https://brainly.com/question/14128303

#SPJ11

The value of the test statistic is 2.75.

To determine the test statistic for comparing the hourly wages of two companies, the researcher would need to conduct a two-sample t-test with equal variances.

The formula for the test statistic is:

[tex]t = (\bar x1 - \barx2) / [s_p \times \sqrt(1/n1 + 1/n2)][/tex]

where:

[tex]\bar x1[/tex] and[tex]\bar x2[/tex] are the sample means for Company A and Company B, respectively

[tex]s_p[/tex] is the pooled standard deviation of the two samples, calculated as:

[tex]s_p = sqrt [((n1 - 1) \times s1^2 + (n2 - 1) \times s2^2) / (n1 + n2 - 2)][/tex]

n1 and n2 are the sample sizes for Company A and Company B, respectively

s1 and s2 are the sample standard deviations for Company A and Company B, respectively.

Plugging in the given values, we get:

[tex]t = (6.75 - 6.25) / [\sqrt(((80-1)\times 1^2 + (60-1)\times 0.95^2)/(80+60-2)) \times \sqrt(1/80 + 1/60)][/tex]

[tex]t = 2.75[/tex]

For similar questions on statistic

https://brainly.com/question/15525560

#SPJ11

Answer:

k = - 8

Step-by-step explanation:

given that (x - a) is a factor of f(x) , then f(a) = 0

given

(x - 1) is a factor of f(x) then f(1) = 0 , that is

3(1)³ + 5(1) + k = 0

3(1) + 5 + k = 0

3 + 5 + k = 0

8 + k = 0 ( subtract 8 from both sides )

k = - 8