Answer:
this not easy
Explanation:
come on
_______________ is a process by which organisms best fit for the environment are most likely tp survive and reproduce
Answer:
natural selection
Explanation:
natural selection
Compare What do infrared technologies, fiber optic
technologies, and satellite technologies all have in
common?
Answer:
ptic fiber communication and satellite communication are the leading technologies which are revolutionizing the world of telecommunications. Both technologies have their advantages and limitations which make them suitable for certain type of applications. This article will provide an overview of optic fiber and satellite communication technologies and present a comparison of the features and related issues.
Optic Fiber Communication
Optic Fiber communication transmits information by sending pulses of light (using laser) through an optic fiber. The low signal loss in optic fibers and high data rate of transmission systems, allow signals with high data rates (exceeding several Gbps) to travel over long distances (more than 100 km) without a need of repeater or amplifier. Moreover, using wavelength division multiplexing (WDM) allows a single fiber to carry multiple signals (upto 10 different signals) of multi-Gbps transmissions. Optic Fiber communication offers extremely high bandwidth, immunity to electromagnetic interference, non-existent delays and immunity from interception by external means. In the 1980s and 1990s, the continents were linked together using undersea optic fiber bringing about a paradigm shift in the global telecommunications.
These advancements in optic fiber communication has resulted in decrease of satellite communications for several types of communications. For instance, transmission between fixed locations or point-to-point communications, where large bandwidths are required (such as transoceanic telephone systems) are made through optic fiber instead of using satellite communication. Optic Fiber communication is also used to transmit telephone signals, Internet communication, LAN (Gigabit LAN) and cable television signals.
Satellite Communication
Satellite communications use artificial satellites as relays between a transmitter and a receiver at different locations on Earth. Satellite systems allow users to bypass typical carrier offices and to broadcast information to multiple locations. Communications satellites are used for radio, TV, telephone, Internet, military and other applications. There are more than 2,000 satellites around Earth’s orbit, being used for communication by both government and private organizations.
Communication Satellites are LOS (line-of-sight) microwave systems with a repeater. These satellites rotate around the earth with the speed of earth and are known as geostationary satellites. The limitations of antenna size also limits focusing capability making the coverage for a single satellite transmitter very large. This makes satellite communication ideal for TV and radio services as the signal has to flow from a single point to many points in a single direction. The large distance of satellites from the earth (about 22,300 miles) results in delays which adversely effects two-way communication like mobile conversations. Low earth orbit satellites can be used for two-way mobile communication because less power is required to reach those satellites.
Explanation:
How hot will a 2.5 L balloon have to get to expand to a volume of 5 L? Assume that the initial temperature of the balloon is 22 C?
The final temperature : 317 °C
Further explanationGiven
V₁=2.5 L
V₂ = 5 L
T₁ = 22 + 273 = 295 K
Required
The temperature, T₂
Solution
Charles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Input the value :
T₂ = (T₁ x V₂) : V₁
T₂ = (295 x 5) : 2.5
T₂ = 590 K = 317 °C
Suppose a current of is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for seconds. Calculate the mass of pure silver deposited on a metal object made into the cathode of the cell.
The given question is incomplete. The complete question is:
Suppose a current of 0.920 A is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 47.0 seconds. Calculate the mass of pure silver deposited on a metal object made into the cathode of the cell.
Answer: 0.0484 g
Explanation:
[tex]Q=I\times t[/tex]
where Q= quantity of electricity in coloumbs
I = current in amperes = 0.920 A
t= time in seconds = 47.0 sec
[tex]Q=0.920A\times 47.0s=43.24C[/tex]
[tex]AgNO_3\rightarrow Ag^++NO_3^-[/tex]
[tex]Ag^++e^-\rightarrow Ag[/tex]
96500 Coloumb of electricity electrolyzes 1 mole of Ag
43.24 C of electricity deposits =[tex]\frac{1}{96500}\times 43.24=0.00045moles[/tex] of Ag
[tex]\text{ mass of Ag}={\text{no of moles}\times {\text{Molar mass}}=0.00045mol\times 108g=0.0484g[/tex]
Thus the mass of pure silver deposited on a metal object made into the cathode of the cell is 0.0484 g
Please help me thanks so much....I’ll mark you?!?!:)))) ( 15 points)
Answer:
all of the above
Explanation:
Which cause of wildfires is least likely to lead to catastrophic results
O arson
Olightning strike
O controlled burn
O unattended campfire
The controlled burn cause of wildfires is least likely to lead to catastrophic results. Therefore, option (C) is correct.
What is controlled burning?A controlled burn is a fire set intentionally for purposes of forest management, prairie restoration, farming, or greenhouse gas. A controlled burn refers to the intentional burning of slash, fuels through burn piles.
Controlled burning can be done during the cooler months to reduce fuel buildup and reduce the likelihood of serious hotter fires. Controlled burning enhances the germination of desirable forest trees, and exposes soil mineral layers which expand seedling vitality.
Controlled burning is also useful in agriculture as it is often referred to as slash and burns. It is one component of shifting cultivation, as a section of field preparation for planting called field burning. This technique is utilized to clear the land of any existing crop residue and kill weeds and weed seeds.
Field burning is less expensive but because it forms smoke and air pollutants, its use is not common in agricultural areas.
Learn more about controlled burn, here:
https://brainly.com/question/28466648
#SPJ2
Someone please help me plz :(please
Answer:
4
Explanation:
the actual change in phase is 4 on the diagram
The number of light waves that occur in one second is known as the wave's
Question 2 options:
amplitude
frequency
energy
movement
Answer:
b
Explanation:
I did this quiz and i think a got it right i also looked up my answer to make sure it was right good luck on quiz :)
How many molecules of water are required for the polymerization of a 22 monomer-long cellulose molecule
Answer:
21 molecules of water.
Explanation:
The polymerization of a 22-monomer long cellulose molecule will require 21 molecules of water. This is because the polymer bond is formed when the -OH group from the 1st monomer of the glucose unit and the H group from the 2nd monomer gets removed as a water molecule. This process is termed to be a condensation reaction.
The half-life of sodium-24 is 15 days. A laboratory technician measures out a 72 g sample. Approximately how many grams of sodium-24 would remain after 45 days?
Answer:
after 45 days 9 g left
Explanation:
Given data:
Half life Na-24 = 15 days
Mass of sample = 72 g
Mass remain after 45 days = ?
Solution:
Number of half lives passed:
Number of half lives = time elapsed / half life
Number of half lives = 45 days / 15 days
Number of half lives = 3
At time zero total amount = 72 g
After first half life = 72 g/ 2= 36 g
At 2nd half life = 36 g/2 = 18 g
At 3rd half life = 18 g/2 = 9 g
Thus after 45 days 9 g left.
Which of the following is not a natural change to the envlronment? drought , flood, disease ranching
Answer:
Disease ranching
Explanation:
Floods and Droughts are caused by the enviorment. Diseases are but a product and don't affect the enviorment.
Answer:
disease ranching is not a natural change to the environment .
Explanation:
This all happen because of human activities
How does temperature affect pressure?
As temperature increases so does pressure.
Pressure is not affected by temperature.
Pressure will always increase if temperature increases or decreases.
As temperature increases, pressure decrease.
Answer:
fr
Explanation:
Classify each solvent as protic or aprotic. a. (CH3)2CHOH c. CH2Cl2 e. N(CH3)3 b. CH3NO2 d. NH3 f. HCONH2
Answer:
The protic solvents are (CH3)2CHOH, NH3, and HCONH2
The aprotic solvent are CH3NO2, CH2Cl2, and N(CH3)3
Explanation:
A protic solvent is a solvent that has a hydrogen atom bound to an oxygen (O), a nitrogen (N), or fluoride (F). Generally, any solvent that contains a labile H⁺ is called a protic solvent.
a. (CH3)2CHOH
(CH3)2CHOH is a protic solvent because one of the hydrogens is bound to oxygen (O)
b. CH3NO2
CH3NO2 is an aprotic (i.e not a protic solvent) solvent because all the hydrogens are bound to carbon.
c. CH2Cl2
CH2Cl2 is an aprotic solvent because all the hydrogens are bound to carbon.
d. NH3 is a protic solvent because all the hydrogens are bound to Nitrogen (N)
e. N(CH3)3 is an aprotic solvent because all the hydrogens are bound to carbon
f. HCONH2 is a protic solvent because two of the hydrogens are bound to Nitrogen (N)
I’ve missed this question twice now. Please help
Answer:
then it only gotta be 2 other options .
Explanation:
Which of the following chemical equations proves that the law of conservation of mass is in effect?
Question 2 options:
Mg2 + LiBr ---> LiMg + Br
2KCl + F2 ---> 2KF + Cl2
Na +O2 ---> Na2O
H20 ---> H2 + O2
Answer:
2KCl + F₂ → 2KF + Cl₂
Explanation:
Law of conservation of mass:
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
For example:
2KCl + F₂ → 2KF + Cl₂
In this equation mass of reactant and product is equal. There are 2 potassium 2 chlorine and fluorine atoms on both side of equation it means mass remain conserved.
All other options are incorrect because mass is not conserved.
Help it is easy I think
Why must scientific investigations be replicable?
A ) to prove the reliability of the results
B)to confirm ideas and theories
C)to prove its validity within the scientific community
D)to improve the investigation each time
Answer:a
Explanation:
Answer:
Answervis A.
Explanation:
Because,so that other scientists can validate the results.
I hope it's helpful!
Assume you mixed 5 µl of your cod fish homogenate with 195 µl working solution. The fluorometer displays a measurement of 12.2 µg/ml. What is the protein concentration of the cod fish homogenate?
Answer:
Hallo
Explanation:
I took that question
Which bonds below are hydrophilic?
A) CC, CH
B) NH, OH, OP, OC
C) NH, OH, OP, OC, CC, CH
Touching a hot stove or the melting of ice in your hand (as you squeeze it) is an example of
Answer: conduction
Explanation:
the heat passes out of the stove and into your hand. So is holding an ice cube – the heat is conducted out of your hand, and into the ice cube (that’s why your hand feels cold).
Answer:
Conduction
Explanation:
Conduction occurs when objects touch. The heat from the warmer object is transferred to the cooler object, eventually evening out the temperatures.
How does an objects speed affect its kinetic energy?
A student fails to insert the cuvette into the colorimeter or spectrophotometer correctly. What effect will this have on the measured absorbance
Answer:
It would cause scattering of light and absorbance measurement is going to be reported as too large
Explanation:
The curvette was not inserted correctly into the spectrometer. The effect that this would have on measured absorbance is that it would cause scattering of light.
Failing to line the curvette correctly would cause light to scatter, the light reaching the photodetector would be less. This less light would then be interpreted as more light being absorbed. This would end up making the absorbance value to be read as too large.
The isotope carbon-14 decays over time into nitrogen-14 with a half-life of 5,730 years. Suppose that you find a fossil that contains 1.25 grams of carbon-14 and 3.75 grams of nitrogen-14. How old is the fossil
Answer:
11460 years
Explanation:
0.693/t1/2 = 2.303/t log (No/N)
t1/2 = half life of the carbon
t = age of the fossil
No= amount of radioactive material originally present
N= amount of radioactive material present at time=t
No= mass of carbon + nitrogen = 5g
0.693/5730 = 2.303/t log (5/1.25)
1.21 ×10^-4 = 1.3866/t
t= 1.3866/1.21 ×10^-4
t= 11460 years
The process by which cells divide is called
A
O replication
B.
mitosis
C.
respiration
D.
photosynthesis
the answer is mitosis
what is a benefit of the artificial selection for the environment and explain it. please help!!
1x+cb=23
thios is right because math
Draw the reactants and complete the mechanism by drawing in the appropriate electron-flow arrows (including stereochemistry) for the following SN2 reaction of an alkyl bromide. Represent the nucleophile as an ion. Draw all missing reactants and/or products in the appropriate boxes by placing atoms on the grid and connecting them with bonds, including charges where needed. Indicate the mechanism by drawing the electron-flow arrows on the molecules. Arrows should start on an atom or a bond and should end on an atom, bond, or where a new bond should be created.
Answer:
Wow I don't that hhehehe sorry
How many moles are in 60.0 grams of water?
3.33 mol H₂O
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisExplanation:Step 1: Define
60.0 g H₂O (Water)
Step 2: Identify Conversions
Molar Mass of H - 1.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 60.0 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O})[/tex]Multiply: [tex]\displaystyle 3.32963 \ mol \ H_2O[/tex]Step 4: Convert
Follow sig fig rules and round. We are given 3 sig figs.
3.32963 mol H₂O ≈ 3.33 mol H₂O
7. Which of the following is not a characteristic of a solution?
a. It is a uniform mixture
b. It will scatter a beam of light
c. The solute and solvent cannot be distinguished by the naked eye
d. The solute particles cannot be separated by filtering
Evaluate (754 mm)/(41 s) to three significant figures and express answer in SI units using an appropriate prefix.
1.14m x MG is the answer
Suppose a psychrometer reads 80°F for the dry bulb and 76°F for the wet bulb. What is the relative humidity?
Answer: 84%
Explanation:
Using the table attached, one can find out the Relative humidity.
Look at the intersection between the temperature on the dry bulb and the difference between the temperature on the dry and wet bulb.
Dry bulb temperature = 80°F
Wet bulb temperature = 76°F
Difference = 80 - 76 = 4°F
Relative humidity is therefore:
= 84%
An aqueous solution of 6.70 M ammonia, NH3, has a density of 0.950 g/mL. The percent by mass of NH3 in the solution is %.
Answer:
12.01% by mass
Explanation:
Percent by mass is 100 times the mass of solute (ammonia) over the mass of the solution. In molarity, we have the moles of ammonia per liter of solution. There are 6.70moles of NH3 in 1L. Thus, we need to convert the moles of ammonia to grams and the liters of solution to grams:
Mass ammonia - Molar mass: 17.031g/mol-
6.70moles * (17.031g / mol) = 114.1g NH₃
Mass solution:
1L * (1000mL / 1L) = 1000mL * (0.950g/mL) = 950g
Percent by mass:
114.1g NH₃ / 950g * 100 =
12.01% by mass