to find the mass percent of dolomite, or camg(co3)2, in a soil sample, a geochemist titrates 11.87 g of soil with 46.20 ml of 0.2516 m hcl. what is the mass percent of dolomite in the soil?

The lambda max (λmax) of an azo color is the wavelength at which the color retains light most unequivocally.

It is decided by the electronic structure of the color atom, which in turn depends on the nature and position of the chromophores and auxochromes within the atom.

A chromophore could be a gathering of iotas in an atom that retains light due to the nearness of delocalized π electrons.

An autochrome may be a gathering of molecules in an atom that changes the electronic properties of the chromophore and impacts the absorption spectrum of the particle.

In azo dyes, the chromophore is the azo gather (-N=N-), which incorporates a tall molar termination coefficient and assimilates emphatically within the unmistakable locale of the electromagnetic range.

The auxochromes are ordinarily fragrant rings, amino bunches, or carboxylic corrosive bunches, which can give or pull back electrons from the chromophore and move the λmax of the color.

When a coupling reagent is included in an azo color response, it responds with a diazonium salt to make an unused azo color. The structure of the coupling reagent can influence the λmax of the coming about color by modifying the electronic properties of the chromophore.

For case, a coupling reagent with an electron-donating gather can increment the electron thickness on the chromophore and move the λmax to a longer wavelength, while a coupling reagent with an electron-withdrawing bunch can diminish the electron thickness on the chromophore and move the λmax to a shorter wavelength.

The number of fragrant rings within the nucleophile can moreover influence the λmax of the azo dye. Fragrant rings are electron-rich and can give electrons to the chromophore, expanding its electron thickness and moving the λmax to a longer wavelength.

Hence, a nucleophile with different fragrant rings will have a more prominent impact on the λmax of the color than a nucleophile with only one fragrant ring.

In rundown, both the conjugation of the coupling reagent and the number of fragrant rings within the nucleophile can impact the electronic structure of the azo color and move its λmax.

Be that as it may, the impact of the nucleophile is ordinarily more critical since it specifically influences the electron thickness of the chromophore. 

To know more about coupling reactions refer to this :

https://brainly.com/question/19561214

#SPJ4

The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)

The balanced chemical equation for the reaction between Mg and HCl is,

Mg + 2HCl → MgCl₂ + H₂

This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:

Calculate the number of moles of Mg in x grams:

Number of moles of Mg = mass of Mg / molar mass of Mg

Number of moles of Mg = x / 24.31

Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:

Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)

Number of moles of H₂ = (x / 24.31) × (1/1)

To know more about moles, here

brainly.com/question/26416088

#SPJ4

, the molar concentration of the solution is 2.202 M. molar concentration of a solution that contains 45.0 g of nacl dissolved in 350.0 ml of water

To calculate the molar concentration of a solution, we need to first determine the number of moles of the solute present in the solution, and then divide that by the volume of the solution in liters.

The molar mass of NaCl is 58.44 g/mol. Therefore, the number of moles of NaCl in 45.0 g can be calculated as:

mole= mass / molar mass = 45.0 g / 58.44 g/mol = 0.7709 mol

Next, we need to convert the volume of the solution from milliliters to liters:

volume = 350.0 ml = 0.3500

Finally, we can calculate the molar concentration (M) of the solution as:

M = moles / volume = 0.7709 mol / 0.3500 L = 2.202 M

Learn more about concentration  here:

https://brainly.com/question/30665317

#SPJ11

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used

Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.

If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.

For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:

[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]

In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.

For such more questions on Stoichiometry:

https://brainly.com/question/30417834

#SPJ11

The pH after the addition of the 0.020 moles of HCl is added to 275 ml of the buffer solution is 6.40.

A buffer solution is an acidic or basic aqueous solution made up of a combination of a weak acid and its conjugate base, or vice versa (more specifically, a pH buffer or hydrogen ion buffer). When a modest amount of a strong acid or base is applied to it, the pH hardly changes at all.

A multitude of chemical applications employ buffer solutions to maintain pH at a practically constant value. Numerous biological systems employ buffering to control pH in the natural world.

275mL buffer 1L/1,1000 mL 0.75 mol H2CO3/ 1L Solution = 0.206 mol H2CO3

275 mL buffer 1L/ 1,000 mL 0.65 mol HCO3- / 1L Solution= 0.179 mol HCO3-

pH = 6.37 + log(0.179 mol + 0.020 mol / 0.206 mol + 0.020 mol)

pH = 6.37 + 0.0293

pH =  6.40.

Learn more about Buffer solution:

https://brainly.com/question/27371101

#SPJ4

A pure substance (such as H₂O or iron) can only exist in three phases (solid, liquid, and gas) - True.

A kind of matter with a predictable chemical composition and physical characteristics is referred to as a chemical substance. According to certain texts, a chemical compound cannot be physically divided into its component parts without rupturing chemical bonds. Chemical compounds, alloys, and simple substances (substances made up of a single chemical element) are all examples of chemical substances.

To distinguish them from mixes, chemical compounds are frequently referred to as 'pure'. Pure water is a popular illustration of a chemical substance; regardless of whether it is separated from a river or created in a lab, it has the same characteristics and hydrogen to oxygen ratio. Other chemicals that are frequently found in their purest forms are refined sugar (sucrose), gold, table salt (sodium chloride), and diamond (carbon). In reality, though, no material is completely pure, and chemical purity is determined by the chemical's intended application.

Learn more about Pure substance:

https://brainly.com/question/18452279

#SPJ4

The fraction of NADH cofactors in the NAD form in a pH 7.0 solution with a potential of -300 mV vs NHE is 0.015. The fraction of NADH cofactors in the NAD form in a pH 7.0 solution with a potential of -350 mV vs NHE is 0.065.

The NADH/NAD couple has a midpoint potential of -320 mV vs NHE. At pH 7.0, the NADH/NAD couple has an Nernst potential of -320 mV. To calculate the fraction of NADH cofactors in the NAD form at a given potential, we use the Nernst equation:

where E0 is the standard potential (-320 mV), R is the gas constant, T is the temperature, n is the number of electrons transferred (2 for NADH/NAD), F is the Faraday constant, and [NAD]/[NADH] is the ratio of the oxidized to reduced forms of the cofactor.

Solving for [NAD]/[NADH], we get:

Plugging in the values for E and T, and assuming a 1:1 ratio of NADH to NAD, we get:

At -300 mV vs NHE, we get:

So the fraction of NADH cofactors in the NAD form is

0.59/(1+0.59) = 0.015.

At -350 mV vs NHE, we get:

So the fraction of NADH cofactors in the NAD form is

0.61/(1+0.61) = 0.065.

To learn more about NADH cofactors, here

https://brainly.com/question/28051041
#SPJ4

Answer:

a.) Instead of configuring all up before some down, all of the configurations were placed as up and down, leaving two spots empty in the 2p sublevel.

b.) There is a missing s sublevel for row 3.

c.) There are two up arrows in one of the lines.

d.) When you get to the "d" section you must subtract the number you're using by 1. So, it's supposed to be 2d to the power of 10.

The concentrations of major species in a mixture of weak and strong acids and bases are determined by their dissociation behavior and interaction in a solution, influencing the overall pH and buffering capacity.

The relationship among the concentrations of major species in a mixture of weak and strong acids and bases can be understood through their dissociation and interaction in a solution.

Strong acids, such as HCl, fully dissociate in water, releasing a high concentration of H+ ions. Similarly, strong bases, like NaOH, dissociate completely, releasing a high concentration of OH- ions.

Weak acids, such as acetic acid (CH3COOH), only partially dissociate in water, releasing a smaller concentration of H+ ions. Likewise, weak bases, like ammonia (NH3), partially dissociate, releasing a smaller concentration of OH- ions.

When a mixture of weak and strong acids and bases is present, the strong species will react first due to their higher concentrations of H+ or OH- ions. This reaction will affect the pH of the solution, as well as the concentrations of the weak species, as they will be buffered by the strong species.

To learn more about buffering capacity click here

brainly.com/question/24188850

#SPJ11

Multiplying the slope (-2905 k) by the gas constant (0.008314 kJ/mol K) gives the activation energy: 24.1 kJ/mol.

The slant of the best-fit line for the diagram of ln(k) versus 1/T is equivalent to - Ea/R, where Ea is the actuation energy for the response, R is the gas consistent, and T is the temperature in Kelvin. To decide the actuation energy, we really want to improve this condition to address for Ea.

Ea = - slant x R

We realize that the slant of the best-fit line is - 2905 K, and R is 8.314 J/(mol·K). In any case, the slant should be changed over completely to units of J/(mol·K) by duplicating by 1000, since we need the actuation energy in units of kJ/mol. Accordingly:

Ea = - (- 2905 K x 8.314 J/(mol·K)) x (1/1000 kJ/J)

Ea = 24.1 kJ/mol

The initiation energy for the response is 24.1 kJ/mol. This worth addresses the base energy expected for the reactants to defeat the energy hindrance and structure items. The higher the initiation energy, the more slow the response rate, as well as the other way around.

To learn more about activation energy , refer:

https://brainly.com/question/30578051

#SPJ4

The volume of a solution, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M is approximately 3.08 liters.

To calculate the volume of a solution, in liters, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M, you can use the dilution formula:

M1V1 = M2V2

where M1 is the initial molarity of the solution (0.40 M), V1 is the initial volume of the solution (1.0 L), M2 is the final molarity of the solution (0.13 M), and V2 is the final volume of the solution (in liters) that we need to find.

Rearrange the formula to solve for V2:

V2 = (M1V1) / M2

Now, plug in the given values:

V2 = (0.40 M * 1.0 L) / 0.13 M

V2 = 0.40 L / 0.13

V2 ≈ 3.08 L

So, the volume of the diluted solution is approximately 3.08 liters.

Learn more about the volume of a solution at https://brainly.com/question/29262229

#SPJ11

The volume of the solution after dilution is approximately 3.08 liters.

To calculate the volume of the solution, we can use the formula:

V1C1 = V2C2

where V1 is the initial volume, C1 is the initial concentration, V2 is the final volume, and C2 is the final concentration.

Plugging in the values given in the question, we get:

(1.0 L)(0.40 M) = V2(0.13 M)

Solving for V2, we get:

V2 = (1.0 L)(0.40 M) / (0.13 M) = 3.08 L

Therefore, the volume of the solution, in liters, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M is 3.08 L.
Hi! I'd be happy to help you calculate the volume of the solution. To do this, we'll use the dilution formula:

C1V1 = C2V2

where C1 and V1 represent the initial concentration and volume, and C2 and V2 represent the final concentration and volume.

1. Plug in the given values:
C1 = 0.40 M (initial concentration of KOH)
V1 = 1.0 L (initial volume of the solution)
C2 = 0.13 M (final concentration of KOH)

2. Rearrange the formula to solve for V2:
V2 = (C1V1) / C2

3. Substitute the values into the formula:
V2 = (0.40 M × 1.0 L) / 0.13 M

4. Calculate V2:
V2 ≈ 3.08 L

So, the volume of the solution after dilution is approximately 3.08 liters.

Learn more about solution here:

https://brainly.com/question/31522192

#SPJ11

The heat capacity of 28.4 g of water is 118.8976 J/°C. The closest option to this answer is option b) 119 J/°C.

To calculate the heat capacity of 28.4 g of water, we need to use the formula:

Heat capacity = mass x specific heat

where mass is given as 28.4 g and specific heat of water is given as 4.184 J/g.°C.

So, substituting the values in the formula, we get:

Heat capacity = 28.4 g x 4.184 J/g.°C
Heat capacity = 118.8976 J/°C


To calculate the heat capacity of 28.4 g of water, you need to multiply the mass of water (m) by its specific heat (c). The formula for heat capacity (Q) is:

Q = m × c

Given:
m = 28.4 g
c = 4.184 J/g.°C

Substitute the values and perform the calculation:

Q = 28.4 g × 4.184 J/g.°C = 118.8 J/°C

The closest answer among the given options is:

b) 119 J/°C

To learn more about mass of water click here

brainly.com/question/26789700

#SPJ11

For every 60 grammes of ethane, 108 grammes of water are produced. We therefore obtain 10.8 g of water from the combustion of 6 g of ethane. As a result, is created in 0.6 moles.

The mole fraction of the solvent must be multiplied by the partial pressure of the solvent in order to determine an ideal solution's vapour pressure. The vapour pressure would be 2.7 mmHg, for example, if the mole fraction is 0.3 and the partial pressure is 9 mmHg.

One mol of the solute is contained in one thousand grammes of the solvent (water) in a one molal solution. It follows that the solution's vapour pressure is 12.08 kPa.

learn more about mole fraction

https://brainly.com/question/29367909

#SPJ1

The final molarity of zinc cation in the solution is 0.0122 M.

Assuming complete dissociation of zinc chloride, we can write the balanced chemical equation as:

[tex]ZnCl_2 (aq) + K_2CO_3 (aq) - > Zn_2+ (aq) + 2K+ (aq) + 2Cl- (aq) + (CO_3) ^{2-} (aq)[/tex]

First, we need to calculate the moles of zinc chloride present in the solution:

moles of ZnCl2 = (0.25 g / 136.30 g/mol) = 0.001833 mol

Since 1 mole of ZnCl2 produces 1 mole of Zn2+, the final molarity of zinc cation in the solution will be:

Molarity of [tex]Zn_{2+[/tex]= moles of [tex]Zn_{2+[/tex]

volume of solution in liters moles of Zn2+ = 0.001833 mol

volume of solution = 0.150 L

Molarity of Zn2+ = 0.001833 mol / 0.150 L = 0.0122 M.

For such more questions on Zinc chloride:

https://brainly.com/question/20689567

#SPJ11

Answer:

combustion

respiration by humans

Explanation:

burning of wood leaves release carbon dioxide which is a green house gas and detrimental to the climate

The helium pressure is 799 torr.

As 1 mm Hg is equal to 1 torr. In an open-ended mercury manometer, the pressure will be equal to the atmospheric pressure.

Also, the pressure of the mercury level in the open arm is 47 mm above that in the arm connected to the flask of helium. Add both the given numbers,

(752 + 47) mm Hg = 799 torr

To learn more about helium pressure,

https://brainly.com/question/15867535

The correct answer is option B. Equilibrium Favors the Products. Equilibrium is a state of balance in which the concentrations of reactants and products remain constant over time.

The concentrations of the reactants and products do not change in a substitution reaction once it has reached equilibrium.

This indicates that the forward response rate and the reverse reaction rate are equal. In this situation, the reaction favours the production of the products over the reactants since the equilibrium favours the products.

This indicates that the forward reaction is occurring at a faster rate than the reverse reaction.

As a result, the equilibrium will favour the products, and their concentrations will be higher than those of the reactants.

Complete Question:

Select  the best possible answer to this question:

Which of the following best describes the equilibrium of this substitution reaction?

A. Equilibrium favors the reactants

B. Equilibrium favors the products

C. Equilibrium is unaffected

D. Equilibrium is reversed

To learn more about Equilibrium visit:

https://brainly.com/question/23121462

#SPJ4

Answer:

physical change, because a new substance is not formed

Explanation:

Answer:

4) physical change, because a new substance is not formed

a physical change is where you can change the look and feel of whatever and get it back to what it was before but a chemical change. is a change where you can not get back to what it was originally

Explanation:

please give me brainliest

The pair of elements that are nonmetals and gases at room temperature and normal atmospheric pressure are:

Oxygen (O₂) - Oxygen is a nonmetal that exists as a diatomic gas at room temperature and normal atmospheric pressure. It is colorless, odorless, and tasteless.

Nitrogen (N₂) - Nitrogen is another nonmetal that exists as a diatomic gas at room temperature and normal atmospheric pressure. It is also colorless, odorless, and tasteless.

Both oxygen and nitrogen are essential components of the Earth's atmosphere, with nitrogen making up about 78% of the air we breathe and oxygen making up about 21%.

To know more about atmospheric pressure, visit:

https://brainly.com/question/30166820

#SPJ1

As the compression is carried out quasi-statically, the gas's temperature will not change during the process. The temperature of the gas is T= 60.65 K.

The temperature of the gas will remain constant during the compression process since it is being done quasi-statically.

This means that the temperature of the gas will remain constant throughout the compression process.

Since the amount of work (500 J) is given, the temperature of the gas can be determined using the equation U = (3/2)nRT, where U is the work, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Solving for T, we find that the temperature of the gas is T = (2/3)(500 J)/(0.50 mol)(8.31 J/mol K) = 60.65 K.

Complete Question:

It takes 500 J of work to compress 0.50 mol of an ideal gas quasi-statically to one-fifth its original volume. What is the temperature of the gas, assuming it remains constant during the compression?

To learn more about temperature visit:

https://brainly.com/question/2339046

#SPJ4

It depends on what you meant by saying not visible. Of it is not visible by using accurate measuring equipment then I think so, but if you mean that all transparent water is drinkable, then no. Think about this. When you put salt in water, you can't see it but it is still there: if you taste the water you can tell that there's salt in there. Let's say that instead of salt there are some bacteria, or some other type of salt which is not appropriate to drink at high levels, such as nitrates. I personally wouldn't recommend drinking from any type.of water unless you are not sure about its purity

The equator of the sun rotates faster than the poles.

The equator of the sun rotates faster than its poles. This is known as differential rotation, and it is due to the fact that the sun is not a solid body, but is composed of gas and plasma. The equatorial regions of the sun rotate faster because they are farther from the center of the sun, where the gravitational pull is stronger, and thus experience less resistance to their motion.

The period of rotation of the equator of the sun is shorter than that of the poles. The equator rotates once every 25.4 days, while the poles rotate once every 36 days.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

The answer is (E) CH4.

Pi bonding refers to the sharing of electrons between two atoms that occurs when two atomic orbitals with parallel electron spins overlap. Pi bonds are formed by the sideways overlap of two p orbitals.

In the given options, all except CH4 have pi bonds:

(A) CO2 has two pi bonds between the carbon atom and the oxygen atoms.
(B) C2H4 has a double bond between the two carbon atoms, which consists of one sigma bond and one pi bond.
(C) CN− has a triple bond between the carbon and nitrogen atoms, consisting of one sigma bond and two pi bonds.
(D) C6H6 has six pi bonds due to the delocalized pi electron system in the benzene ring.

In contrast, CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

Visit to know more about Sigma bonds:-

brainly.com/question/31377841

#SPJ11

When CuSO4·5H2O (copper(II) sulfate pentahydrate) is dissolved in water, the major species present in the solution, besides the solvent molecules (water), are Cu²⁺ (copper(II) ions) and SO₄²⁻ (sulfate ions).

The dissolution process involves the dissociation of CuSO4·5H2O into its constituent ions:
CuSO4·5H2O → Cu²⁺ + SO₄²⁻ + 5H2O
The water molecules serve as the solvent, and the Cu²⁺ and SO₄²⁻ ions are the solute, forming the solution.

The compound dissociates in water, releasing the Cu2+ and SO42- ions, which become hydrated by water molecules. The five water molecules in the formula unit of the compound (CuSO4·5H2O) become part of the solvent and do not exist as distinct species in the solution.

So, in summary, the major species present in a solution of CuSO4·5H2O in water are Cu2+ cations and SO42- anions, along with water molecules as the solvent.

To learn more about solvent molecules, refer:-

https://brainly.com/question/9545412

#SPJ11

When CuSO4.5H2O (copper(II) sulfate pentahydrate) is dissolved in water, the major species present in the solution besides the solvent molecules are Cu²⁺ (copper(II) ions) and SO₄²⁻ (sulfate ions).

When CuSO4·5H2O is dissolved in water, the major species present in the solution besides the solvent molecules are Cu2+ ions and SO42- ions. The Cu2+ ions and SO42- ions come from the dissociation of the CuSO4 compound in water, while the H2O molecules are present as the solvent. The Cu2+ ions and SO42- ions interact with the water molecules through hydration and solvation, respectively, which affects the physical and chemical properties of the solution. The dissolution process can be represented by the following equation:

CuSO4.5H2O (s) → Cu²⁺ (aq) + SO₄²⁻ (aq) + 5H2O (l)

In this equation, CuSO4.5H2O dissociates into its constituent ions, Cu²⁺ and SO₄²⁻, while the water molecules from the pentahydrate become part of the solvent.

Learn more about solvent: https://brainly.com/question/25326161

#SPJ11

When solid mercury(I) chloride (Hg₂Cl₂) reacts with ammonia (NH₃), two precipitates form: white mercurous ammonium chloride (HgNHCl) and black mercuric nitride (Hg₃N₂).

The chemical equation for the reaction is:

Hg₂Cl₂(s) + 2NH₃(aq) → HgNH₂Cl(s) + Hg₃N₂(s) + 2HCl(aq)

The first precipitate, mercurous ammonium chloride, is a white solid that forms because of the reaction between Hg₂Cl₂ and NH₃. It is also known as white precipitate and has a molecular formula of HgNH₂Cl.

The second precipitate, mercuric nitride, is a black solid that forms because of the reaction between the excess ammonia and the Hg²⁺ ions produced by the Hg₂Cl₂. The molecular formula of mercuric nitride is Hg₃N₂.

To learn more about nitride follow the link:

https://brainly.com/question/24004315

#SPJ4

Taking into account definition of reaction stoichiometry, 209.36 grams of Mg(OH)₂ are needed.

In first place, the balanced reaction is:

3 Mg(OH)₂ + 2 H₃PO₄ → Mg₃(PO₄)₂ + 6 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 196 grams of H₃PO₄ react with 174.99 grams of Mg(OH)₂, 2.345×10² grams of H₃PO₄ react with how much mass of Mg(OH)₂?

mass of Mg(OH)₂= (2.345×10² grams of H₃PO₄× 174.99 grams of Mg(OH)₂)÷ 196 grams of H₃PO₄

mass of Mg(OH)₂= 209.36 grams

Finally, 209.36 grams of Mg(OH)₂ is required.

Learn more about reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

https://brainly.com/question/22997914

#SPJ4

The molar mass of the unknown gas is 27.0 g/mol.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.

To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the values at STP, we get:

n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]

n = 0.1018 moles

The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.

So the molar mass of the gas can be calculated as:

molar mass = mass / moles

molar mass = 2.75 g / 0.1018 mole

molar mass = 27.0 g/mol

Therefore, the molar mass of the unknown gas is 27.0 g/mol.

Learn more about , the molar mass

brainly.com/question/22997914