Two resistors of resistance 19 ohm each are connected in series.
In series combination, equivalent resistance = 19+19 = 38 ohm
Potential difference = 10 V
V/I = R
I ( current ) = V/R = 10 V / 38 ohm = 0.26 ampere
The 6kg box is pushed to the left at a constant speed. The coefficient of friction is 0.78. Solve for the amount of force with which the hand pushes the box.
Answer:
45.864N
Explanation:
Using the formula
F = nR
n is the coefficient of friction
R is the normal reaction
R = mg
F = nmg
F = 0.78 * 6 * 9.8
F = 45.864N
Hence the amount of force with which the hand pushes the box is 45.864N
A 2.60 kg lion runs at a speed of 5.00 m/s until he sees his prey. The lion then speeds up 8.00 m/s to catch it. How much work did do after he speeds up?
Answer: 50.7 J
Explanation:
Given
mass of lion is [tex]m=2.6\ kg[/tex]
The initial speed of the lion is [tex]v_1=5\ m/s[/tex]
increased speed of lion is [tex]v_2=8\ m/s[/tex]
Initially, its kinetic energy is [tex]K_1=\frac{1}{2}mv_1^2[/tex]
Final kinetic energy [tex]k_2=\frac{1}{2}mv_2^2[/tex]
work did by lion after speed up is [tex]k_2-k_1[/tex]
[tex]\Rightarrow W=\dfrac{1}{2}\times 2.6[8^2-5^2]\\\\\Rightarrow W=1.3\times [39]=50.7\ J[/tex]
what Sport is similar to Ulama
When measuring volume, your final
result must be in
A. linear units.
B. single units.
C. squared units.
D. cubed units.
A 16 lb weight stretches a spring 6 inches in equilibrium. It is attached to a damping mechanism with constant c. Find all values of c such that the free vibration of the weight has infinitely many oscillations.
Answer:
[tex]-8<c<8[/tex]
Explanation:
Given data:
Weight W = 16 lb
length l = 6/12 = 0.5 ft
hence, spring constant k = W/l = 16/0.5 = 32 lb/ft
The equation of motion of spring is
[tex]mx''+cx+kx=0\\0.5x''+cx'+32x=0[/tex]
the auxiliary equation can be written as
[tex]0.5r^2+cr+32=0\\r^2+2cr+64=0[/tex]
The discriminate of equation is
[tex]D =(2c)^2+-4(1)(64)\\=4(c^2-64)[/tex]
To get the value of the damping constant,
[tex]D<0\\4(c^2-64)<0\\c>-8, c<8\\-8<c<8[/tex]
Compare and contrast chemical reactions and nuclear reactions in terms of particles involved . Select all the statements that apply Both chemical and nuclear equations are written with equal signs. Nuclear reactions create a difference in the number of protons, neutrons, and electrons after the reaction. A chemical reaction is the rearranging of atoms to form new substances. E=mc^ aleph 2 applies to both chemical and nuclear reactions. In a nuclear reactionparticles can transmute into others. Chemical reactions produce energy on levels comparable to nuclear reactions The total number of protons, neutrons, and electrons stay the same throughout the chemical reaction.
Answer:
. A chemical reaction is the rearranging of atoms to form new substances. E=mc^ aleph
what is the main cause of the seasons
As amplitude of a wave increases, the
_____ of the wave also increases.
frequency
wave speed
wavelength
energy
i think so it is frequency
A washer is swung in a circle on a string as shown below. If the string
breaks which arrow shows the path the washer will take? *
Answer:
yabarrow
Explanation:
i think thats the name
I will mark you brainlist!!
How is primary succession different from secondary succession? Give an example of an event that may lead to primary succession.
Answer:
Primary Succession is defined as the type of ecological succession, which occurs or start from the barren, uninhabited and unoccupied areas, such as the newly formed pond, rock, dunes, etc., while such kind of succession, which occurs in the area where there was the existence of life previously but got abandoned due to natural disturbances like deforestation, natural calamities (flood, earthquake, tsunami), the field with no vegetation is known as Secondary Succession
Explanation:
Some examples of primary succession include the formation of a new ecosystem after a volcano, glacier outbursts, or a nuclear explosion. Some examples of secondary succession include succession after fire, harvesting, logging, or abandonment of land or the renewal after a disease outbreak
i hope this answer helps :)
A car starts from rest and goes down a slope with a constant
acceleration of 5 m/s2
. After 5 s the car reaches the bottom of the hill. Its
speed at the bottom of the hill, in meters per second, is:
Answer:
25m/s
Explanation:
here we use 1st equation of motion
then we find this ans
a stone on the ground has zero energy why
Explanation:
it has no energy when considered with respect to earth ,as it has neither height (i e potential energy) nor velocity (i.e kinetic energy).
A boy weighs 50 kg and is running with 225 J of energy, what is his velocity?
1:
This diagram shows four different dishes on the kitchen shelf.
tea cup
IN
2:
bowl
50 N
mug
10 N
plate
SON
3:
999
4
:
Which of these dishes has the least potential energy?
bowl
5:
plate
mug
6:
tea cup
Answer:
Bowl will have maximum potential energy
Explanation:
It is the bowl that will have maximum potential energy.
It is because potential energy is high when both height and mass of the object is high.
Here in this case the bowl has maximum weight with maximum height except the tea cup but the potential weight of cup will not make much impact as its weight is very low.
Consider the two-slit interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light?
409 nm
164 nm
570 nm
655 nm
Explanation:
Consider the two-slit Interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light? (1 point) O 655 nm O 570 nm O 164 nm O 409 nm
COMPANY
is warming up important before doing an intense exercise or work-out? Wh?
Answer:
Yes, warming up is necessary before intense exercise, work-out or sports because they help regulate temperatures of your body. Warming up also makes your muscles ready for intense physical activities and prevents muscle cramps.
Explanation:
The head scale of a screw gauge contains 100 divisions and it's pitch is 1mm. what is the least count of the screw gauge
Answer:
0.01 mm
Explanation:
The least count of the screw gauge = pitch/number of divisions on circular scale
Pitch = 1 mm and number of divisions = 100
Substituting the values of the variables into the equation, we have
least count of the screw gauge = pitch/number of divisions on circular scale = 1 mm/100 = 0.01 mm
If a wave is traveling at 60 cm/second and has a wavelength of 15 cm, what is the frequency?
A. 900 Hz
B. 60 Hz
C. 8 Hz
D. 4 Hz
Answer: B
G v = 60 cm/s λ = 15 cm E f = V / λ S f = 4 Hz U f = ? S f = (60 cm/s) / 15 cm 5.
Explanation:
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force Fnew would give the box the same final velocity?
We have that for the Question " constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110." it can be said that
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
From the question we are told
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force F new would give the box the same final velocity?
Generally the equation for the Force is mathematically given as
F_p-\mu mg=ma
Therefore
11-0.110*7*9.8=7*a
a=0.49m/s^2
Using Newtons equation
v^2=u^2+2as
v^2=0+2*0.49*15
v=3.83m/s
Therefore
F=ma
F=0.49*7
F_{new}=3.43N
Therefore
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
For more information on this visit
https://brainly.com/question/23379286
What does the transfer of energy have to do with natural disasters?
Answer: When an earthquake occurs energy is transferred, from where the rocks break, and travels throughout the world. The bigger the quake the further from the epicentre the waves will travel. There are four types of earthquake wave generated during an earth quake
Explanation:
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
What is meant by natural disaster ?Natural disasters include calamities with atmospheric, geological, and hydrological causes (such as droughts, earthquakes, floods, hurricanes, and landslides), which can result in fatalities, property damage, and social and environmental disturbance.
Here,
Internal and external forces work together to create natural disasters. The first is internal forces that are caused by the earth's internal heat energy and result in geologic hazards including earthquakes, volcanoes, and tsunamis.
Energy is transferred during an earthquake and propagates throughout the globe from the point at which the rocks split. The waves' distance from the epicenter increases with the size of the earthquake.
During an earthquake, four different kinds of seismic waves are produced. They transfer energy out of the earthquake's epicentre.
Hence,
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
To learn more about natural disaster, click:
https://brainly.com/question/31874791
#SPJ2
A small car is traveling at a speed of 60 mph on the highway. In the next lane, a large passenger bus is traveling at the same speed.
Answer:
A. The bus has more kinetic energy than the car.
Explanation:
As we know that
Kinetic energy is the amount of energy possessed by the body at the time when it is in motion.
Also,
Kinetic energy = 1 ÷ 2mv²
Here m denotes the mass of the body
and v denotes the velocity of the body.
So it would be based on the mass & velocity of the body
As if the passenger bus contains more kinetic energy as compared to the car because of the big mass
Hence, the first option is correct
Water flows through a garden hose which is attached to a nozzle. The water flows through hose with a speed of 1.81 m/s and through the nozzle with a speed of 18.3 m/s. Calculate the maximum height (in m) to which water could be squirted if it emerges from the nozzle and emerges with the nozzle removed. (a) Emerges from the nozzle. m (b) Emerges with the nozzle removed, assuming the same flow rate. m
Answer:
a) 17.086m
b) 0.1671 m
Explanation:
Given data: speed of water through the hose = 1.81 m/s
through the nozzle = 18.3 m/s
We know that maximum height of an object with upward velocity v is given by,
a) H = v^2/2g
where H is the maximum height water emerges
= 18.3^2/(2×9.8) = 17.086 m answer
b) Again,
H = v^2/2g
= 1.81^2/(2×9.8) = 0.1671 m
Which of the following describes the relationship between the velocity and
pressure of a fluid?
A. Pascal's principle
B. Archimedes' principle
C. Bernoulli's principle
D. Flow rate equation
Answer is c
Explanation:
I think its a option pascal's principal
Answer:
c
Explanation:
Just took the quiz
mc2
Describe the process of nuclear fission and how the famous equation E
relates to this process.
frfyuegffffjhAnswer:
frjhgfjgresjytgfejygfjse
Explanation:
Explain what happens to the path of light as it hits a piece of black paper, a glass mirror, and a glass
of water. Explain why the light behaves the way it does as it hits each object.
1. Light is _________ by the black paper.
2. Light is _________ by the mirror.
3. Light is _________ by the glass of water.
In one cycle of any heat engine
A. the net work done is larger than the heat exhausted.
B. more heat flows from the engine than enters the engine.
C. The internal energy of the engine does not change.
D. the net heat flow is zero.
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. True or false
Answer:
true..
Explanation:
Newton's 2nd law of motion is greater the mass of an object the more force it will take to accelerate the object
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. The given statement is true.
What is force?Force is defined as the push or pull applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
The following equation help to understand the statement;
Force is defined as the product of mass and acceleration. Its unit is Newton.
F=ma
F=mg
W=mg
The weight of an item is determined by its mass and the net force exerted on it, according to Newton's second rule of motion. The provided assertion is correct.
Hence,the given statement is true.
To learn more about the force, refer to the link;
https://brainly.com/question/26115859
#SPJ2
Focal distance of a concave lens is always:
O A. smaller than the image distance.
O B. positive.
O C. negative.
O D. larger than the object distance.
The statement "if I raise the temperature of
a cup of water, then an increased amount of
sugar will be dissolved" is an example of
A. an observation
B. a hypothesis.
C. a theory
A car starts from rest and reaches a speed of 25m/s in 4 seconds. What is the acceleration?
Also, Calculate the distance the object traveled,
Can y’all help me with this one
Answer:
a = 6.25 m/s/s
d = 50 m
Explanation:
Given:
v1 (initial velocity)= 0 m/s (cz its at rest)
v2 (final velocity)= 25 m/s
t = 4s
a = ?
d = ?
to determine acceleration
a = (v2 - v1)/ t
= (25m/s - 0m/s)/4s
= 6.25 m/s/s
to determine distance traveled
d = 1/2(v1 + v2)t
=1/2(0m/s+25m/s)(4s)
=50 m
Answer:
Answer in explanation.
Explanation:
Using Equation
[tex]v = u + at[/tex]
where v is the final velocity
u is initial velocity
a is acceleration
t is time taken
given u = 0, v = 25, t = 4,
[tex]25 = 0 + 4a \\ 4a = 25 \\ a = 6.25 \frac{m}{ {s}^{2} } [/tex]
Now, using equation
[tex]v {}^{2} = {u}^{2} + 2as[/tex]
where v and u remains the same, a = 6.25 and s is the distance,
[tex](25) {}^{2} = \: {0}^{2} + 2(6.25)s \\ 12.5s = 625 \\ s = \frac{625}{12.5} \\ s = 50m[/tex]