Un lote con forma cuadrada tiene una superficie de LaTeX: \sqrt{\frac{4225}{16}\:\:\:\:m^2}\:\:\:\:\:. Si el dueño del lote quiere colocar 3 hileras de alambres alrededor del terreno, ¿cuantos metros necesitará?

Answers

Answer 1

Answer:

The owner needs 195 meters of wire

Step-by-step explanation:

If the lot is squared shaped, then its area is given by the formula:

[tex]Area =x^2[/tex]

where x is the side of the square. Then considering the value they provide for the surface, each side must be of length:

[tex]x^2=\frac{4225}{16} \,m^2\\x=\sqrt{\frac{4225}{16}} \,\,m\\x=16.25\,\,m[/tex]

Then the perimeter around this square lot is four times that side length:

Perimeter = 4 (16.25 m) = 65 m

and since the owner wants three rows of wire, the total length of wire needed is:

3 (65 m) = 195 m


Related Questions

HALP !Find the next term of the series: -3 + -1 + 1 + ...

Answers

Answer:

3

Step-by-step explanation:

We are adding 2 each time

-3 +2 = -1

-1 +2 = 1

To get the next term add 2

1 +2 = 3

Answer: 3

Step-by-step explanation:

Discussion Topic There are four basic operations: addition, subtraction, multiplication, and division. Do you think these four operations can be performed on polynomials? What would it look like to perform these operations on polynomials? Which operation do you think would be the simplest? Which do you think will be difficult?

Answers

Step-by-step explanation:

1. Yes  addition, subtraction, multiplication, and division can be performed on polynomials. like our everyday arithmetic dealings with mathematical operators, polynomials are no exception when it comes to math operators, the four   basic operations addition, subtraction, multiplication, and division can be performed on polynomials as well.

2. It can be less handy plus the operation can get messy if you do not have a good sense/understanding/hold of what you are doing things can get messy.

3. I personally know that the simplest is the addition of polynomials

4. I cant say which is difficult, but the operation that can get things messy  for me most time is the division operation

ASAP!! Please help me. I will not accept nonsense answers, but will mark as BRAINLIEST if you answer is correctly with solutions.

Answers

Answer:

X = 2 , X = -3

Option C is the correct option.

Step-by-step explanation:

[tex]f(x) = a {x}^{2} + bx + c[/tex]

Discriminant = [tex] {b}^{2} - 4ac[/tex]

Given d = 15

When discriminant D > 0 --> roots are real and distinct. ( unequal )

So , [tex] {3}^{rd} [/tex] option has real and distinct roots.

Hope this helps..

Best regards!!

Which example illustrates the commutative property of addition for polynomials?

Answers

Answer:

             The fourth.

Step-by-step explanation:

The alternation of addition means you can swap places of components of sum.

(2x²+5x) and (4x²-4x) are polynominal components of the sum: (2x²+5x)+(4x²-4x)

Answer:

D

Step-by-step explanation:

got it right on edge

1
English
TIME REMAINING
58:10
The radius of the large sphere is double the radius of
the small sphere.
How many times is the volume of the large sphere than
the small sphere?
O 2
4
6
08

Answers

Answer

2

Step-by-step explanation

The radius of the large sphere is double the radius of the small sphere

Suppose $x-3$ and $y+3$ are multiples of $7$. What is the smallest positive integer, $n,$ for which $x^2+xy+y^2+n$ is a multiple of $7$? Enter your answer. I need Immediate help or you wont get the points.

Answers

In the language of modular arithmetic, we're given

[tex]x-3\equiv0\pmod7\implies x\equiv3\pmod7[/tex]

[tex]y+3\equiv0\pmod7\implies y\equiv-3\equiv4\pmod7[/tex]

Then x = 7a + 3 and y = 7b + 4 for integers a and b.

Substitute these into the quadratic expression and simplify:

[tex]x^2+xy+y^2+n\equiv0\pmod7[/tex]

[tex](7a+3)^2+(7a+3)(7b+4)+(7b+4)^2+n\equiv0\pmod7[/tex]

[tex]49a^2+42a+9+49ab+28a+21b+12+49b^2+56b+16+n \equiv 0\pmod7[/tex]

[tex]37+n\equiv 0\pmod7[/tex]

[tex]n\equiv-2\equiv5\pmod7[/tex]

which means the smallest positive integer n we are looking for is 5.

Are the terms CSC, SEC, and COT equivalent to the terms Sin^-1, Cos^-1, and Tan^-1? Are the three pairs of terms the same thing just written differently, or are they entirely different?

Answers

Answer:

Step-by-step explanation:

It depends on how it is written. By definition

[tex]\csc(x) = (\sin(x))^{-1} = \frac{1}{\sin(x)}[/tex]

[tex]\sec(x) = (\cos(x))^{-1} = \frac{1}{\cos(x)}[/tex]

[tex]\cot(x) = (\tan(x))^{-1} = \frac{1}{\tan(x)}[/tex]

however the functions

[tex]\sin^{-1}(x), \cos^{-1}(x), \tan^{-1}(x)[/tex] are the inverse functions of sine, cosine and tangent respectively. So, they are not equivalent functions

The following is the student's grades for a certain class
(left : grades, right : frequency)

determine :
a.) how many students have grades that are above than 73,5

b) how many students have grades that are below 75


Answers

Answer:

a) 20 students

b) 20 students

Step-by-step explanation:

a) From the given frequency table, we have to check the number of students that scored above 73.5 and add them up.

Therefore, the number of students that have grades above 73.5 are:

14 + 4 + 2 = 20 students

b) 75 falls in between 74 - 76 and we do not have the individual frequencies of the grades (74, 75, 76).

However, we can use the data we have from the table to make an assumption.

The number of students that have grades below 75 will be:

13 + 5 + 2 = 20 students

If y is inversely proportional to x and y = 5, when x = 7, find the value of y when x = 70

Answers

Answer:

y = [tex]\frac{1}{2}[/tex]

Step-by-step explanation:

Given y is inversely proportional to x then the equation relating them is

y = [tex]\frac{k}{x}[/tex] ← k is the constant of variation

To find k use the condition y = 5 when x = 7, then

5 = [tex]\frac{k}{7}[/tex] ( multiply both sides by 7 )

35 = k

y = [tex]\frac{35}{x}[/tex] ← equation of variation

When x = 70, then

y = [tex]\frac{35}{70}[/tex] = [tex]\frac{1}{2}[/tex]

(OFFERING ALL THE POINTS I HAVE) Word Problem. Please help!! Part 1 of problem: The main tank has a radius of 70 feet. What is the volume of the quarter-sphere sized tank? Round your answer to the nearest whole number and use 3.14 for Pi. (Use sphere volume formula) Part 2: The theme park company is building a scale model of the killer whale stadium main show tank for an investor's presentation. Each dimension will be made 6 times smaller to accommodate the mock-up in the presentation room. How many times smaller than the actual volume is the volume of the mock-up? Part 3: Using the information from part 2, answer the following question by filling in the blank: The volume of the actual tank is __% of the mock-up of the tank.

Answers

Answer:

Part 1: 359,007 ft³

Part 2: 216 times smaller

Part 3: 21600%

Step-by-step explanation:

Part 1:

The parameters for the tank are;

The radius of the tank = 70 feet

The volume of a sphere = 4/3·π·r³

Therefore, the volume of a quarter sphere = 1/4×The volume of a sphere

The volume of a quarter sphere = 1/4×4/3·π·r³ = π·r³/3

Plugging in the value for the radius gives

Volume = π×70³/3 = 114,333.33×3.14 = 359,006.7≈ 359,007 ft³.

Part 2:

The dimension of the scale model  = 1/6 × Actual dimension

Therefore, we have the radius of the sphere of the scale model = 1/6 × 70

Which gives;

The radius of the sphere of the scale model = 35/3 = 11.67 feet

The volume of the scale model = π·r³/3 = (3.14×11.67³)/3 = 1662.07 ≈ 1662 ft³

The number of times smaller the scale model is than the actual volume = (Actual volume)/(Scale model) = (359,007 ft³)/(1662 ft³) = 216 times

The number of times smaller the scale model is than the actual volume =  216 times = (1/Scale of model)³ = (1/(1/6))³ = 6³.

Part 3:

The percentage of the mock-up, x, to the volume of the actual tank is given as follows

x/100 ×  1662  = 359,007

∴ x = 216 × 100 = 21600%

The percentage of the mock-up, to the volume of the actual tank is 21600%.

Answer:

Part 1: 359,007 ft³

Part 2: 216 times smaller

Part 3: 21600%

Step-by-step explanation:

Part 1:

The parameters for the tank are;

The radius of the tank = 70 feet

The volume of a sphere = 4/3·π·r³

Therefore, the volume of a quarter sphere = 1/4×The volume of a sphere

The volume of a quarter sphere = 1/4×4/3·π·r³ = π·r³/3

Plugging in the value for the radius gives

Volume = π×70³/3 = 114,333.33×3.14 = 359,006.7≈ 359,007 ft³.

Part 2:

The dimension of the scale model  = 1/6 × Actual dimension

Therefore, we have the radius of the sphere of the scale model = 1/6 × 70

Which gives;

The radius of the sphere of the scale model = 35/3 = 11.67 feet

The volume of the scale model = π·r³/3 = (3.14×11.67³)/3 = 1662.07 ≈ 1662 ft³

The number of times smaller the scale model is than the actual volume = (Actual volume)/(Scale model) = (359,007 ft³)/(1662 ft³) = 216 times

The number of times smaller the scale model is than the actual volume =  216 times = (1/Scale of model)³ = (1/(1/6))³ = 6³.

Part 3:

The percentage of the mock-up, x, to the volume of the actual tank is given as follows

x/100 ×  1662  = 359,007

∴ x = 216 × 100 = 21600%

The percentage of the mock-up, to the volume of the actual tank is 21600%.

Find the solution of the system of equations shown on the graph.
Please and thank you :)

Answers

Answer:

Hey there!

The solution is where the lines intersect, and here we see that would be (-4,3)

Hope this helps :)

Helppppp pleaseeeeee

Answers

Answer:

(2, 2), (5, 3), (9, 4), and (13, 5).

Step-by-step explanation:

The inverse of a function makes it so that the x-values become y-values, and y-values become x-values.

The current coordinates are (2, 2), (3, 5), (4, 9), and (5, 13).

If the function were inversed, the coordinates would be (2, 2), (5, 3), (9, 4), and (13, 5).

Hope this helps!

Find the value of x in the data given below if the mean is 2. The values are 2, 4, 1, 1, x, 3, 2

Answers

Answer:

[tex]\boxed{x=1}[/tex]

Step-by-step explanation:

[tex]mean=\frac{sum \: of \: terms}{number \: of \: terms}[/tex]

[tex]2=\frac{2+4+1+1+x+3+2}{7}[/tex]

[tex]2=\frac{13+x}{7}[/tex]

[tex]14=13+x[/tex]

[tex]x=1[/tex]

A cycling race is 17 miles long. The cyclists will begin at point S and ride a number of laps around a neighborhood block. After the last lap, the cyclists will sprint 2.0 miles to the finish line. A rectangle with a width of 0.75 miles and height of 0.5 miles. The 2 mile finish comes out of one corner. Using the equation w (1.5 + 1) + 2 = 17, the race's organizer determined the cyclists will need to ride 9 laps before the sprint to the finish. Which explains the error? The equation should be 0.75 w + 0.5 w + 2 = 17, and the cyclists will need to ride 12 laps before the sprint to the finish. The equation should be 2 (0.75 w + 0.5) + 2 = 17, and the cyclists will need to ride 21 laps before the sprint to the finish. The solution should be 6, and the cyclists will need to ride 6 laps before the sprint to the finish. The solution should be 8, and the cyclists will need to ride 8 laps before the sprint to the finish.

Answers

Answer:

it is c because i took test review

Step-by-step explanation:

Answer:

C The solution should be 6, and the cyclists will need to ride 6 laps before the sprint to the finish.

Rewrite the following radical expression in rational exponent form.

Answers

Answer:

[tex]x^\frac{3}{7}[/tex]

Step-by-step explanation:

we can write [tex]\sqrt[7]{x}[/tex] as [tex]x^\dfrac{1}{7}[/tex] and we multiply 1 by 3 to get [tex]x^\frac{3}{7}[/tex]

1 to the tenth power

Answers

Answer: 1

Explanation:

1 to any power will always be 1

Answer:

1

Step-by-step explanation:

1 to the tenth power is also 1 multiplied by 1 10 times.

1 · 1 · 1 · 1 · 1 · 1 · 1 · 1 · 1 · 1 = 1

1 to any power will always have the answer of 1.

How many seconds will elapse between seeing lightning and hearing the thunder if the lightning strikes 5.0 mi (26,400 ft) away and the air temperature is 83.6°F?

Answers

Answer:

Time taken = 23.10 sec (Approx)

Step-by-step explanation:

Given:

Distance of lighting = 5 mi = 26,400 ft

Air temperature =83.6°F  = 28.67°FC

Computation:

Speed of the sound

V = 331 + 0.61 × T

V = 331 + 0.6 × 28.67

V = 348.202 m/s

Distance = 5 mi = 8,046.72 m

Time taken =  Distance / Speed

Time taken =  8,046.72 / 348.202

Time taken = 23.10 sec (Approx)

Eight of your friends came to your house to watch a movie. Three-fourths of your friends stayed overnight. How many friends stayed?

Answers

Answer:

6 friends

Step-by-step explanation:

8 friends came to watch the movie.

3/4 of them stayed overnight.

The number of people that stayed overnight will be the product of 3/4 by 8:

3/4 * 8 = 24 / 4 = 6

6 friends stayed overnight.

Answer:

6 friends because the three fourths are gone

Step-by-step explanation:

What is the slope of a line perpendicular to one with a slope of {-2}{3}.

Answers

Answer:

3/2

Step-by-step explanation:

Perpendicular lines have slopes that multiply to -1

m * -2/3  =-1

Multiply by -3/2 to isolate m

m * -2/3 * -3/2 = -1 * -3/2

m = 3/2

The perpendicular line has a slope of 3/2

What is the value of log0.5^16

Answers

Answer:

-4.81647993062

Step-by-step explanation:

Look at the image below ↓

Based on the mathematical analysis, the value of log 0.5^16 is -4.816.

What are Logarithms?

A logarithm is a mathematical term that is used to describe the exponent or power to which a base must be raised to yield a given number.

In this case, to calculate the value of log0.5^16 use logarithm properties.

rewrite the expression as log(0.5)^(16).

=> log(a^b) = b * log(a)

=> 16 * log(0.5).

Given that the Logarithm is the inverse of exponentiation => log(0.5) is equal to -0.301.

Substitute this value back into the expression:

16 * (-0.301) = -4.816.

Hence, in this case, it is concluded that the correct answer to the value of log 0.5^16 is -4.816.

Learn more about Logarithms here: https://brainly.com/question/30226560

#SPJ6

pls let me know what you get for the question below

Answers

Answer:

233.37

Step-by-step explanation:

so between each gondola is 20.95 so you will multiply it by 35 not 36 (because between the first you go round and come back to the same first you started so no space between first and last) then get circumference as 733.25 using

[tex]c = \pi \: d[/tex]

you get diameter

Simplify (8j3 − 10j2 − 7) − (6j3 − 10j2 − j + 12).

Answers

Answer:

Step-by-step explanation:

8j^3-10j^2-7-6j^3+10j^2+j-12

2j^3+j-12

Jack had 4 hours of school. He spent 45 minutes in the library and 12 hour on a science lecture and had a lunch break of 25 minutes. How much time is left for the school to get over? (Write the answer as a fraction.)

Answers

Answer:

[tex]\dfrac{10}{4} \ hour[/tex]

Step-by-step explanation:

Given that :

Jack had 4 hours of school.

He spent 45 minutes in the library

1/2 hour on a science lecture  and;

had a lunch break of 25 minutes

The objective is to determine how much time is left for the school to get over and we are to write the answer as a fraction.

In order to do that, we will have to convert the minutes into hours,

we all know that; 60 minutes = 1 hour.

Then,

45 minutes = (45/60)hour = 3/4 hour

25/60 minutes = 1/4 hour

Therefore, the amount of time left  for the school to get over is:

= [tex]4 - (\dfrac{3}{4}+\dfrac{1}{2}+ \dfrac{1}{4})[/tex]

=  [tex]\dfrac{16-(3+2+1)}{4}[/tex]

= [tex]\dfrac{16-6}{4}[/tex]

= [tex]\dfrac{10}{4} \ hour[/tex]

A builder wrote the measurements needed for a door.
height of door
2032 mm
width or door
Why did the builder write these measurements using millimetres instead of cm or m?​

Answers

Answer:

Check the answer below.

Step-by-step explanation:

This is a very trivial but professional question. Note that all of millimetre, centimetre and metres are acceptable metric units but the millimetre is more preferable by builders and architects because:

1. It is easier to work with integer values on building and architectural plans, an advantage given by measuring and recording in millimetre.

2. working in millimetre allows for precision. The builder will record values that are very close to the true value

3. The measurement will be easily readable by anybody that sees it.

Need help, there are also two more questions to answer after those but I couldn’t put them in the picture, they are semicircle and radius. Thanks

Answers

Answer:

arc KL=minor arc

arc LJK=major arc

Step-by-step explanation:

so minor arc is a arc which is larger than a semicircle .

a major arc is a circle having measure less than radians.

Find the point Q along the directed line segement from point R (-3, 3) to point S(6, -3) that divides the segment in the ratio 2:1.

Answers

Answer:

Step-by-step explanation:

m : n = 2 : 1

R (-3, 3 )  ;  x1 = -3 & y1 = 3

S(6 , -3)   ; x2 = 6 & y2 = -3

Formula for the point that divides a line m:n = [tex](\frac{mx_{2}+nx_{1}}{m+n} , \frac{my_{2}+ny_{1}}{m+n})[/tex]

[tex]Q(\frac{2*6+1*(-3)}{2+1}, \frac{2*-3 + 1*3}{2+1})\\\\\\Q(\frac{12-3}{3} , \frac{-6+3}{2+1})\\\\\\Q(\frac{9}{3} , \frac{-3}{3})\\\\[/tex]

=Q(3, -1)

Answer:

D.) (3,-1)

Step-by-step explanation:

I got it correct on founders edtell

PLEASE ANSWER SOON! I WILL MARK BRAINLIEST! THANK YOU!

The ratio of the measures of the acute angles of a right triangle is 8:1. In degrees, what is the measure of the largest angle of the triangle?

Answers

Answer:

  80°

Step-by-step explanation:

The sum of the measures of the acute angles in a right triangle is 90°. The sum of ratio measures in the ratio 8 : 1 is (8+1) = 9. Thus, each of those measures stands for 90°/9 = 10°. Then the angle ratio is ...

  80° : 10° = 8 : 1

The measure of the largest acute angle in the triangle is ...

  10° × 8 = 80°

does the table represent a function why or why not?

Answers

Answer:

Yes, because each x-value corresponds to one y value.

Step-by-step explanation:

If you look at the table, you notice that there is one output (y) for every input (x). This means that it is a function. It would NOT be a function if you had two outputs for an input. For example, there are two x values that are 6. For one coordinate pair, the table says (6,9) and (6,8). Since there are two values for the same input- it wouldn't be a function. In this case, there is an input of 4 and 5 with the same output. That is okay! Even though they have the same y value, those inputs still only have ONE output.

5. Lisa sold costume jewelry at a bazaar. The
first hour she sold 2 bracelets and 3 rings
for a total of $26. Later a customer bought
2 rings and paid $12. All bracelets were
priced the same. All rings were priced the
same. How much did a bracelet cost?

Answers

Answer:

$4

Step-by-step explanation:

2 Bracelets + 3 rings = $26

2 rings = $12

3 rings = x

To get the cost of 1 ring you divide 12 by 2 and the answer you get is 6.

The total cost of the 3 rings is $18( $6*3)

Then you subtract the cost of both 2 bracelets and 3 rings($26) from the cost of 3 rings($18). The answer is $8. ( THIS IS THE COST OF 2 BRACELETS)

1 BRACELET= $4( $8/2)

Need help ASAP thank you

Answers

Answer:

A. Volume = 462 cm³; Surface Area = 458 cm²

B. Volume

C. Surface area

Step-by-step explanation:

A. Given a rectangular box:

[tex] Width (w) = 3 cm [/tex]

[tex] Height (h) = 14 cm [/tex]

[tex] length (l) = 11 cm [/tex]

=>Volume of the juice box

[tex] Volume (V) = whl [/tex]

[tex] Volume (V) = 3*14*11 [/tex]

[tex] = 3*14*11 = 462 [/tex]

Volume of juice box = 462 cm³

=>Surface area (S.A) of juice box:

[tex] S.A = 2(wl + hl + hw) [/tex]

[tex] S.A = 2(3*11 + 14*11 + 14*3) [/tex]

[tex] S.A = 2(33 + 154 + 42) [/tex]

[tex] S.A = 2(229) [/tex]

[tex] S.A = 458 cm^2 [/tex]

Surface area of juice box = 458 cm²

B. Volume would be used to find the amount of juice the box can hold

C. Surface area would be used to know how much wax to buy to use in coating the box.

Other Questions
(05.05)Based on the graph, what is the initial value of the linear relationship?-4 -35/35 Please answer this question now which is the largest dairy in asia and where it is located??? Transactions are typically processed either [A] all together for a defined time window (e.g. end of a day or week) or [B] processed as each transaction occurs. The second method [B] is called ________ processing. An estimated demand curve does not necessarily match actual data perfectly because A. it is not possible to accurately calculate the coefficients of the curve. B. demand is unpredictable. C. some factors that are not measured or observed may affect the curve. D. the random error term has too large of a range. what is arsenic. Define it Cindy is doing a presentation on prenatal development and wants to present the three main periods of prenatal development in order from conception to birth. Cindy's presentation uses the following order:___________. A. Germinal, embryonic, and fetal B. Embryonic, germinal, and fetal C. Fetal, embryonic, and germinal D. Germinal, fetal, and embryonic Haver Company currently produces component RX5 for its sole product. The current cost per unit to manufacture the required 65,000 units of RX5 follows. Direct materials $ 5.00 Direct labor 9.00 Overhead 10.00 Total costs per unit $ 24.00 Direct materials and direct labor are 100% variable. Overhead is 80% fixed. An outside supplier has offered to supply the 65,000 units of RX5 for $18.00 per unit. Required: 1. Determine the total incremental cost of making 65,000 units of RX5. 2. Determine the total incremental cost of buying 65,000 units of RX5. 3. Should the company make or buy RX5 By the mid 1700's, there were overpeople living in the 13 American Colonies.A. 2.5 millionB. 250 thousandC. 500 thousand Fortune Enterprises is an all-equity firm that is considering issuing $13.5 million of perpetual debt. The interest rate is 10%. The firm will use the proceeds of the bond sale to repurchase equity. Fortune distributes all earnings available to stockholders immediately as dividends. The firm will generate $3 million of earnings before interest and taxes (EBIT) every year into perpetuity. Fortune is subject to a corporate tax rate of 40%. Suppose the personal tax rate on interest income is 55%, and the personal tax rate on equity income is 20%. What is the annual after-tax cash flow to debt holders under each plan in Q7? A. Debt holders get $0 mil. under the unlevered plan vs. 1.2 mil. under the levered plan B. Debt holders get $1.2 mil. under the unlevered plan vs. 0.66 mil. under the levered plan C. Debt holders get $0 mil. under the unlevered plan vs. 0.66 mil. under the levered plan D. Debt holders get $0 mil. under the unlevered plan vs. 0.6075 mil. under the levered plan Which of the following equations have no solutions?Choose all answers that apply:-602 + 32 = 60r 32-60.X + 32 = 32.r 60-60r = 32 322 60-602 + 32 = -60r - 60 3 is what percentage of 12? need help thankssssss How is the endosymbiosis theory used to support the emergence of eukaryota Simplify 27^2. _______ a0 Simplify 13^2. _______ a0 In what ways does Penelope show her faithfulness to her long delayed husband as she interacts withthe suitors?She never lets her emotions overwhelm her but continues quietly weaving,She continues to move through her role as courteous hostess to the suitors.She flirts with the suitors, leading them to continue staying even though she really wants them goneShe daily weaves and then nightly unravels her father-in-law's funeral tapestry, delaying any decision she must make about herfuture.Her character qualities mirror those of Ulysses, Why do you think the British might have exaggerated stories of Indian brutality in 1857 (The War of Independence) A student sits in a professor's office crying about her grade. The professor doesn't acknowledge her emotions, but rather asks her what she plans to do about the class. This is an example of an irrelevant response.a. Trueb. False Reflect the given preimage over y=1 followed by y=7. Find the new coordinates. What one transformation is this double reflection the same as? (Note: when you are reflecting over a y= line, the x-values of the preimage will remain the same and you will be changing the y-values) Historians still dont agree on the exact cause of the Salem witch trials. Several theories have been put forward explaining the motive behind the accusations: Economic Causes In Salem, some families were very rich, while others were poor. This disparity led to jealousy among some of the people. Several families were engaged in property disputes. Some of the accused were rich. If convicted, they would lose their land and property, which could then be bought by others. Suggesting that a person was a witch was one way of obtaining that persons property. Some of the accused were poor. They were outsiders, and wealthier townspeople looked down on them. Accusing these people of being witches was one way of eliminating them from the village. Political Causes In the recent past, there had been several disputes over who should govern the Massachusetts Colony. The colonists had also endured some violent conflicts with American Indians. These events created political turmoil and instability. People were upset, and they blamed their problems on a lack of effective leadership. The leaders, in turn, were eager to see others take the blame for social problems. Accusing people of witchcraft made the accused responsible for social and political problems. The supposed witches could be blamed for whatever was wrong with society. Leaders did not have to take responsibility for mistakes or try to make changes. Intellectual Causes People knew little about science in those days. They were afraid of things they didnt understand. People didnt know about the causes of disease. If a person became sick, they believed it might be because of a curse. Witchcraft was one way of explaining the unknown. Psychological Causes Most of the accusers were young women and girls. At that time, girls were supposed to be quiet and obedient. They had little power in society. Accusing others of witchcraft may have made them feel powerful. Some girls and women may have been under pressure to make up stories about witchcraft. Powerful people who had something to gain from seeing certain people in the town convicted of witchcraft may have pressured these women into testifying. Mass hysteria may have also played a role. Mass hysteria happens when large numbers of people respond to real or imagined threats in an emotional and unreasonable way. They become frightened, angry, and even violent. During times of mass hysteria, people may engage in mob violence, hunting down, shaming, and sometimes even killing those they believe are responsible for their troubles. The power of suggestion can contribute to mass hysteria. When one person claims to see, hear, or feel something, others may believe it to be true and swear they hear, see, or feel the same thing without knowing why. For instance, if you see your friends scratch themselves or yawn, you may start scratching or yawning too, even if you arent itchy or tired. This is one example of what psychologists call the power of suggestion. Review this source for additional information about the causes of the Salem witch trials: Causes for the Outbreak of Witch Hysteria in Salem Think about the different theories that have been presented so far. Do you feel that one theory is more convincing than the others? Do you believe there might be more than one cause involved? Write a short opinion piece of about 200 to 250 words explaining what you believe caused the witch accusations. Refer to the details and source provided above to support your opinion. Make sure you include an introductory statement and a conclusion.