we investigated a jet landing on an aircraft carrier. in a later maneuver, the jet comes in for a landing on solid ground with a speed of 87 m/s, and its acceleration can have a maximum magnitude of 8.55 m/s2 as it comes to rest. (a) from the instant the jet touches the runway, what is the minimum time interval needed before it can come to rest? (b) can this jet land on a small tropical island airport where the runway is 0.800 km long? (c) explain your answer.

Answer:

1) 00.5

2) 400

3) 0.0601

4) 10900

Explanation:

goggle it

Explanation:

why do you think is important to study about that different forms of precolonial literature?

In the Cathode ray experiments, JJ Thomson observed that cathode rays were produced high voltage was applied to an anode and cathode in an evacuated tube.

Thomson surrounded the cathode ray with two electric plates that were charged in opposition to test the qualities of the particles. The negatively charged electric plate was avoided in favor of the positively charged plate, deflecting the cathode ray. This demonstrated the presence of negatively charged particles in the cathode ray.

JJ Thomson discovered during the cathode ray tests that cathode rays were generated when a high voltage was supplied to the anode and cathode inside of an evacuated tube. Cathode rays were deflected away from a negative charge and towards a positive charge, which allowed Thomson to conclude that they were negative particles. It was later determined that these particles were electrons, not cathode rays.

To know more about JJ Thomson's experiment, visit: https://brainly.com/question/18720089

#SPJ4

The speed of the car is 55.2 m/s.

We can define speed as the ratio of distance to time. We know that the question states the car is one lap behind the lead race car when the lead car has 52 laps to go in a race.

If 1 lap =  1.34km or 1340 m

Distance covered =   1340 m * 52 = 69680 m

Time = 69680 m/ 56.3 m/s

= 1237.7 s

Given that the second car is one lap behind;

51 *  1340 m = 68340 m

Speed =  68340 m/1237.7 s

= 55.2 m/s

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

Chemically similar particles are those whose electrical surroundings are the same. If two protons can switch places by rotating or reflecting one another, they are chemically identical.

Protons that are chemically equivalent only generate one signal.

All three Ha protons and all three Hb protons are chemically equal to one another, according to NMR nomenclature. However, the Ha protons and the Hb protons are not chemically similar.

The resonance frequency of the Ha protons differs from that of the Hb protons as a result.

A molecule with equivalent protons emits a single signal. The corresponding protons of ethane are four in ethylene, two in acetylene, and six in benzene.

A molecule, each of which results in an absorption and the absorptions are widely separated in the spectrum are called nonequivalent proton.

To know more about entities, visit:

https://brainly.com/question/14972782

#SPJ4

Answer:

69.8 m  (nearest tenth)

Explanation:

Constant Acceleration Equations (SUVAT)

[tex]\boxed{\begin{array}{c}\begin{aligned}v&=u+at\\\\s&=ut+\dfrac{1}{2}at^2\\\\ s&=\left(\dfrac{u+v}{2}\right)t\\\\v^2&=u^2+2as\\\\s&=vt-\dfrac{1}{2}at^2\end{aligned}\end{array}} \quad \boxed{\begin{minipage}{4.6 cm}$s$ = displacement in m\\\\$u$ = initial velocity in ms$^{-1}$\\\\$v$ = final velocity in ms$^{-1}$\\\\$a$ = acceleration in ms$^{-2}$\\\\$t$ = time in s (seconds)\end{minipage}}[/tex]

When using SUVAT, assume the object is modeled as a particle and that acceleration is constant.

Consider the horizontal and vertical motion of the projectile separately.

As the projectile is fired horizontally, the vertical component of its initial velocity is zero.

Acceleration due to gravity = 9.8 ms⁻²

Resolving vertically, taking ↓ as positive:

[tex]s=10.5 \quad u=0 \quad a=9.8[/tex]

[tex]\begin{aligned}\textsf{Using} \quad s&=ut+\dfrac{1}{2}at^2:\\\\10.5&=(0)t+\dfrac{1}{2}(9.8)t^2\\10.5&=4.9t^2\\t^2&=\dfrac{15}{7}\\t&=\sqrt{\dfrac{15}{7}}\end{aligned}[/tex]

The horizontal component of velocity is constant, as there is no acceleration horizontally.

Resolving horizontally, using the value of t found previously:

[tex]u=47.7 \quad v=47.7 \quad a=0 \quad t=\sqrt{\dfrac{15}{7}}[/tex]

[tex]\begin{aligned}\textsf{Using} \quad s&=ut+\dfrac{1}{2}at^2:\\\\s&=47.7\left(\sqrt{\dfrac{15}{7}}\right)+\dfrac{1}{2}(0)\left(\sqrt{\dfrac{15}{7}}\right)^2\\s&=47.7\left(\sqrt{\dfrac{15}{7}}\right)\\s&=69.82565022...\end{aligned}[/tex]

Therefore, the cannonball lands 69.8 m from the base of the wall.

The minimum energy is released, and hence the minimum frequency photons are produced, when the proton and antiproton are at rest once they annihilate.

Energy = 2.27 × 10²³Hz

That is, E=E₀ and K=0. To conserve momentum, each photon must have the identical magnitude of momentum, and p = E/C, so each photon must take away one-half the energy

[tex]E_{min} = \frac{E_{0} }{2}[/tex] = E₀ = 938.3MeV = [tex]hf_{min}[/tex]

[tex]f_{min} =\frac{(938.3MeV) (1.602 * 10^{-13} J/MeV}{6.626 *10^{-34}Js } = 2.27 * 10^{23} Hz[/tex]

How much energy is required to produce a proton-antiproton pair?

The process of creating a particle-antiparticle pair is called pair production. to supply this pair, you would like a boson with sufficient energy. The Mass-Energy of both a proton and an anti-proton is about 938 Mev/c². Translated into Joules, this mean you would like about 27 MJ to do so

The amount of energy (E) produced by annihilation is equal to the mass (m) that disappears multiplied by the square of the speed of light in a vacuum (c)—i.e., E = mc²

Learn more about proton antiproton :

brainly.com/question/16733936

#SPJ4

There is always a potential that an abrasive power tool's wheel wasn't sound and may burst or disintegrate, thus neither the operator nor anyone else should ever stand in front of the wheel as it accelerates to full operational speed. So, C is the best choice.

Before mounting, all abrasive wheels must undergo a thorough inspection and ring test to make sure there are no fractures or other flaws. The spindle's grinding wheels must easily fit on it without being pressed in.

The spindle nut should only be tightened enough to secure the wheel. The following are a few recommendations for using abrasive wheels: The spindle end, nut, and flange projection guards on abrasive wheel tools must be covered. Keep the wheel in the right alignment. Never use more force than the fastenings can handle.

To know more about abrasive wheels go to https://brainly.com/question/2123488

#SPJ4

Contact electrification occurs any time two objects with different levels of charge make physical contact.

Contact electrification is a word that describes a phenomenon wherein surfaces end up electrically charged, thru a number of viable mechanisms, while  or greater objects come within near proximity of one another.

Static electricity is created while effective and bad costs aren't balanced. Protons and neutrons do not circulate around tons, however electrons love to jump all around the place. Whilst an item has greater electrons, it has a poor price.

Static electricity is an imbalance of electrical costs with in or at the surface of a material. The rate stays till it could pass away by an electric powered current or electric discharge.

Learn more about Static electricity here:- https://brainly.com/question/4918499

#SPJ4

The length of the vector is proportional to the size of the force.

The wheelchair is not accelerating, so the forces on it are balanced.

In a free-body diagram of the wheelchair, force due to gravity points down,  normal force points up, force pushing the wheelchair points forward, friction resisting the motion points backward.

For the force diagram:

Forces are a push or pull agents that causes a change in the state of a body when they are applied to the body.

Unbalanced forces cause acceleration of a body.

In a free-body diagram, the mass (force) on an object is represented by a vector.

The length of the vector is proportional to the size of the force. Suppose you push a wheelchair forward at constant velocity. The wheelchair is not accelerating, so the forces on it are balanced. In a free-body diagram of the wheelchair, the vector for the force due to gravity points down, the vector for the normal force points up, the vector for your force pushing the wheelchair points forward, and the vector for the force of friction resisting the motion points backward.

Considering the picture visual representation of the forces between many interacting objects or the force diagram:

In picture 1: F gravity points down; F normal points up

In picture 2: F gravity points down; F tension points up

In picture 3: F gravity points down; F spring points up.

Learn more about forces at: https://brainly.com/question/12970081

#SPJ1

The current I in the circuit after first replacing the four sources with a single equivalent source is calculated as 50mA. The circuit can be seen in the attached diagram.

If we have to combine the voltage sources, they must be in series. In the question since it is given that same current flows through each, thus it means it is in series.

If we start from the bottom and proceed clockwise in the circuit, we have

-3-9-5+1 = -16V

The four voltage equivalent sources are to be replaced with a single 16V source.

so, then when KVL is mixed with the Ohm's law, we have

-16 + 100i +220i = 0

⇒ i = 16/320 = 50mA

The circuit described in the given question is also equivalent

For the diagram pertaining to the circuit, it is attached below.

To know more about Circuits, visit:

https://brainly.com/question/27206933

#SPJ4

The formula for calculating resistance is Volts / Current (option C). Details about resistance can be found below.

Resistance is a force that tends to oppose motion. It is measured in a unit called ohms (Ω).

The electrical resistance of a circuit component or device is the ratio of the voltage applied to the electric current which flows through it.

The resistance of an object can be calculated by dividing the voltage (V) by its current (I) as follows:

R = V/I

Therefore, the formula for calculating resistance is Volts / Current.

Learn more about resistance at: https://brainly.com/question/824149

#SPJ1

The minimum power that is required for the fan is 75W.

It is given that:

ρ = 1.2 kg/m³, density of air

v = 5 m/s, flow velocity

Q = 5 m³/s, volumetric flow rate

So the minimum power required at 100% efficiency can be known by

P= 1/2 [tex]v^{2}[/tex][tex]\rho[/tex]Q

=1/2 x [tex]5^{2}[/tex] x 1.2 x 5

=75 W

The minimum power to be supplied is 75W

Power is defined as the amount of energy that is transferred or converted per unit time. Watt can be defined as the unit of Power which is one joule per second.

To know more about Power, visit:

https://brainly.com/question/2289248

#SPJ4

Answer:

The woman displaces a volume of air equivalent to her own volume; VV; V=\dfrac{m}{\rho_{\text{woman}}}=\dfrac{60}{980}=0.0612\mathrm{\ m^3}V= ρ woman m = 98060 =0.0612 m 3

Explanation:

Answer: LOL Hello! for the third time! the answer is Inverse distance weighting (IDW) is a type of deterministic method for multivariate interpolation with a known scattered set of points. The assigned values to unknown points are calculated with a weighted average of the values available at the known points.

Explanation: ^^ Up there have a good day and hope this helps you!

Question: Hello: ) ✨What is Inverse Distance Weighting?​

Answer: a method of interpolation that estimates cell values by averaging the values of sample data points in the neighborhood of each processing cell. The closer a point is to the center of the cell being estimated, the more influence, or weight, it has in the averaging process.Inverse Distance Weighting (IDW) interpolation estimates unknown values with specifying search distance, closest points, power setting & barriers.”

Hope this helps<3

By rectangular box formula,  the surface area is 8/h

We need to know about rectangular box volume to solve this problem. The volume of the rectangular box can be calculated by multiplying the base area by height. It can be written

V = SA . h

where V is volume, SA is base area and h is height

From the question above, we know that

SA = square

V = 8 m³

Hence, the surface area is

SA = x²

where x is side of the base length

Substitute to rectangular box volume equation

V = SA . h

8 = x².h

h = 8/x²

x = √(8/h) ...... (1)

Substitute (1) to find surface area function

SA = x²

SA = (√(8/h))²

SA = 8/h

Hence, the surface area is 8/h

Find more on rectangular box at: https://brainly.com/question/8880159

#SPJ4

The velocity of the motorcycle after the first 120 m is 24.97 m/s and the total displacement of the motorcycle is 280 m.

The acceleration of the motorcycle starting from rest is 2.6 m/s².

The acceleration of the motorcycle after traveling a distance of 120 m id -1.5 m/s² and the velocity is 12 m/s.

The initial velocity of the motorcycle, u = 0 m/s

The acceleration of the motorcycle, a = 2.6 m/s²

Therefore, the final velocity of the motorcycle after d = 120m is:

v² - u² = 2as

v² = u² + 2as

v² = (0)² + 2 × 2.6 × 120

v² =  624

v = √624

v = 24.97 m/s

Now, the motorcycle slows down to -1.5 m/s² and a velocity of 12 m/s.

So, the initial velocity is u = √624 m/s and final velocity is v = - 12 m/s.

So,

v² - u² = 2as

( - 12)² - (√624)² = 2 × -1.5 × d

144 - 624 = - 3 × d

- 480 = - 3d

d = 480 / 3 = 160 m

Therefore, the total displacement of the motorcycle is 120 m + 160 m = 280 m.

Learn more about velocity here:

https://brainly.com/question/80295?source=archive

#SPJ9

Answer:

400 MHz

Explanation:

voodoo$ knows all

The amount of momentum before and after a jump is equal. Prior to jumping, neither the skateboarder nor the skateboard had any momentum. Following a jump, the skateboarder gains forward momentum, thus the skateboard must also gain reverse momentum

In the hippie jump, a skateboarder travels at a specific speed Vh along a flat, horizontal surface. Then, without touching the board horizontally, he jumps straight up. He may now soar through the air at a speed equal to that of the board (also moving at Vh). As a result, he can land on top of the board because it is still right underneath him. this is how the momentum involved.

To learn more about  momentum:

https://brainly.com/question/24030570

#SPJ9

Electric power steering system  are more compact than the hydraulic  pumps , both statement are wrong.

Since electro-hydraulic and electric power steering systems are lighter and more compact than conventional hydraulic power steering systems.The hydraulic power steering system is basically a closed loop system that uses pressurized hydraulic fluids for changing the wheel angle of the front wheels based on the steering angle. It consists of a hydraulic pump driven by  valves, belt, reservoir, cylinder, and a driver control mechanism, whereas Electric power steering is for highly automated  driving, it  has an electric motor that controls the vehicle  and provides enjoying  and  optimal steering feel, and electro-hydraulic power steering is  where an electric motor  drives the pump which  is controlled according to the needed assisting steering force, the delivery of the hydraulic pump is increase at very low  speed in order give a large amount of steering power.

To know more about power steering refer to the link https://brainly.com/question/25975874?referrer=searchResults.

#SPJ4

The security guard make the trip of 120 m of distance in a time of 250 s with a speed of: 0.48 m/s

The formula and procedure we will use to solve this exercise is:

v = x /t

Where:

Information about the problem:

Applying the velocity formula we have that:

v = x /t

v = 120 m /250 s

v = 0.48 m/s

It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).

Learn more about velocity at: brainly.com/question/80295?source=archive

#SPJ4

Answer:

Classical physics predicted that the light given off by an object as its temperature increased is that the energy of the light would increase from visible light into the ultraviolet range

Explanation:

The phenomena are referred to as Black body radiation. When a substance heats up, its electrons become excited. An electron will occasionally descend to a lower state and produce a photon. The frequency of emitted light increases with increasing temperature.

This is also how incandescent light bulbs operate. The majority of the light we see from stars is caused by black body radiation, and we may deduce the temperature of a star based on its hue. Plank's Law is the equation that gives the energy emitted as a function of frequency and temperature.

To learn more about classical physics. Click https://brainly.com/question/13086882

#SPJ4

The value of constant acceleration is 0.29m/s

Given that Haley is driving down a straight highway at 73 mph. A construction sign warns that the speed limit will drop to 55 mph in 0.50 mi.

we have to  find out constant acceleration (in ) that will bring Haley to this lower speed in the distance available

we know that,

1mile= 1.609km

1 km/h = 5/18m/s

Initial Speed of Haley(u)=  73mph=73×1.609×(5÷18) =32.63m/s

Final Speed of Haley(v)=  55 mph=55×1.609×(5÷18)=24.58m/s

The distance to be travelled  while lowering the speed(S)= 0.5mile=0.805km=805m

according to third equation of motion,v²-u²=2as

as speed is lowering down the acceleration will be in the opposite direction of motion, hence acceleration will be negative, equation will become u²-v²=2as

putting values,(32.63)²-(24.58)²=2a×805

a=(460.55÷1610)

a≅0.29m/s²

the constant acceleration  that will drop speed to  is 0.29m/s².

Learn more about constant acceleration   here:

brainly.com/question/18677887

#SPJ4

A. The acceleration of the train is –0.68 m/s²

B. The stopping distance is 660 m

This is defined as the rate of change of velocity which time. It is expressed as

a = (v – u) / t

Where

a = (v – u) / t

a = (0 – 30) / 44

a = –0.68 m/s²

s = (v + u)t / 2

s = [(0 + 30) × 44]/ 2

s = (30 × 44) / 2

s = 1320 / 2

s = 660 m

Learn more about acceleration:

https://brainly.com/question/491732

#SPJ1

The gravitational force is 3.54 x 10²⁰ N

We need to know about gravitational force to solve this problem. The gravitational force is the force caused by two masses objects. The magnitude of gravitational force can be determined as

F = G.m1.m2 / R²

where F is the gravitational force, G is the gravitational constant (6.674 × 10¯¹¹ Nm²/kg²), m1 and m2 are the mass of the object and R is the radius.

From the question above, we know that

m1 = 5.972 x 10²⁴ kg

m2 = 1.989 x 10³⁰ kg

R = 1.496 x 10¹² m

By substituting the following parameters, we get

F = G.m1.m2 / R²

F = 6.674 × 10¯¹¹  . 5.972 x 10²⁴ . 1.989 x 10³⁰ / (1.496 x 10¹²)²

F = 3.54 x 10²⁰ N

Hence, the gravitational force is 3.54 x 10²⁰ N

For more on gravitational force at: https://brainly.com/question/19050897

#SPJ4

The acceleration can be found as 3.44× 10³  m/s².

To find the acceleration, the given values are,

Initial velocity = 55 km/hr

Final velocity = 85 km/hr

time t = 8.70 seconds.

                   a = (v - u ) / t m/s²

where, a - acceleration m/s²

v - Initial velocity km/hr

u - final velocity km/hr

t - time

Substituting the values in the acceleration formula,

 a = ( 85 × 10³ - 55 ×10³ ) / 8.70

    = 30 × 10³/ 8.70

    = 3.44 × 10³ m/s².

The acceleration of the automobile can be found as 3.44 × 10³  m/s².

Learn more about Acceleration,

https://brainly.com/question/8231525

#SPJ4

Answer:

c. natural resources

Explanation:

mercantilism is an economic practice by which governments use their economies

if am ryt

Answer:

C. natural resources

Explanation:

Mercantilism is based on the concept of a nation's power being directly related to its wealth. A nation's goal under mercantilism was to obtain as much gold and silver as possible and to export more goods than it imported from other nations. Gold and Silver are natural resources.

By using the lowest resonant frequency, the wave speed is 389.084 m/s.

We need to know about the fundamental resonant frequency to solve this problem. When the string is vibrating at its lowest resonant frequency, it should follow the rule

λ = 2L

where λ is wavelength and L is length of string

From the question above, we know that

f = 922 Hz

L = 21.1 cm

By substituting to the following equation, we can calculate the wavelength

λ = 2L

λ = 2 . 21.1

λ = 42.2 cm

λ = 0.422 m

Find the speed of wave

v = λ . f

v = 0.422 . 922

v = 389.084 m/s

Find more on resonant frequency at: https://brainly.com/question/23262887

#SPJ4

Container A has a higher temperature than container B according to the ideal gas approximation.

Multiple randomly moving point particles with no interparticle interactions make create an ideal gas in theory. The ideal gas notion is useful because it complies with the ideal gas law, has a condensed equation of state, and can be studied using statistical mechanics.

An ideal gas is a fictitious gas that, because of its tiny size and lack of interactions, perfectly complies with the gas laws. Ideal gas is a gas that abides by all gas laws at all pressures and temperatures.

Ideal gases' internal energy and enthalpy are solely dependent on temperature; neither volume nor pressure play a role.

To learn more about ideal gas from the given link:

brainly.com/question/28257995

#SPJ4