Answers
Answer:
Explanation:
The graph shows the phase diagram of water . From it , it is clear that at 100°C water remains in equilibrium with water vapour and at this temperature , the vapour pressure is equal to one atm . So this must be boiling point of water.
At 0.7 atm pressure , boiling point must have been reduced . So when water is at 100°C , it must have been completely in vapour phase .
Now the pressure is increased to 1.4 atm . In this process of increase of pressure , the water in vapour state must have turned into liquid state as soon as the pressure increases beyond 1 atm . Beyond it its boiling point would have increased above 100°C so it can not remain in gaseous phase . At 1.4 atm , its boiling point would have increased to 110°C or so . Hence it must be in liquid phase because its temperature is below its boiling point at that pressure .
Hence water changes from gaseous phase to liquid phase when pressure changes from 0.7atm to 1.4 atm .
Related Questions
For a system, H2(g) + I2(g) ⇌ 2 HI(g), Kc = 62.9 at 750 K. 2.80 moles of HI were placed in a 10.0-liter container, brought up to 750 K, and allowed to come to equilibrium. Which situation described below is true, at equilibrium?
a. [HI] = 2 × [H2]
b. [HI] = [H2]
c. [HI] < [H2]
d. [HI] > [H2]
e. [H2] > [I2]
Answers
Answer:
d. [HI] > [H2]
Explanation:
The explanation at equilibrium is shown below:-
Data provided [tex]H_2(g) + I(g) \rightleftharpoons 2HI_(g)[/tex]
Initial concentration - - [tex]\frac{2.80}{10}[/tex] = 0.280 M
At equilibrium x x 0.280 - 2x
[tex]K_c = \frac{(HI)^2}{(H_2)(I_2)} = 62.9[/tex]
[tex]= \frac{(0.280 - 2x)^2}{x^2} = 62.9\\\\4x^2 - 1.12x + 0.0784 = 62.9x^2[/tex]
After solve the above equation we will get
x = 0.0282 M
Therefore at equilibrium
[tex][H_2] = [I_2] = x = 0.0282M\\\\[/tex]
[tex][HI] = 0.280 - 2x = 0.2236 M[/tex]
Hence, the correct option is d.
A 25.0 mL sample of a solution of an unknown compound is titrated with a 0.115 M NaOH solution. The titration curve above was obtained with pH at equivalence point of around 8. The unknown compound is ________.
Answers
Answer:
Weak acid
Explanation:
A titration curve is a graphical description of the change in pH of the solution in the conical flask as the reagent is added from the burette. A titration curve can be plotted for the different kinds of acid and base titrations. The volume of the titrant is always plotted as the independent variable and the pH of the solution as the dependent variable. The equivalence point is read off from the titration curve. A titration curve is very important because it shows the pH at various points during the titration.
A weak acid/strong base titration leads to an equivalence point above 7. From the question, we were told that the pH at equivalence point lies around 8. Hence the unknown substance must be a weak acid.
MARKING BRAINLIEST!! - Chlorine reacts with methane to form gaseous hydrogen chloride and chloromethane according to the following equation: Cl2 (g) + CH4 (g) → HCl (g) + CH3Cl (g) If 100 mL of chlorine reacted with excess methane at constant pressure and temperature, what volume of chloromethane would be formed? Question 7 options: 50, cannot tell from the information provided, 200, 100
Answers
Answer:
100mL of chloromethane
Explanation:
Based on the equation:
Cl₂(g) + CH₄(g) → HCl(g) + CH₃Cl(g)
1 mole of chlorine reacts per mole of methane to produce 1 mole of HCl and 1 mole of chloromethane
Avogadro's law says that equal volumes of all gases, at the same temperature and pressure, have the same number of molecules. Using Avogadro's law we can say of the equation that:
1 mL of chlorine reacts per mL of methane to produce 1 mL of HCl and 1 mL of chloromethane
Because the system stays under constant pressure and temperature.
As 100mL of Cl₂ reacts with excess of CH₄ and 1mL of Cl₂ produce 1mL of CH₃Cl there are produced:
100mL of chloromethaneLabel the following as either an Element, Compound, or Mixture.
Answers
Answer:
27. Element (Because it contains all same atoms)
28. Compound (It contains atoms held together through chemical bonds)
29. Element (it contains all same atoms)
33. Mixture (It contains different atoms but they are not held together through chemical means)
34. Compound (Different atoms held together through chemical means)
35. Mixture (Mixture of elements and compounds)
30. Element (it contains all same atoms)
31. Mixture (Mixture of elements and compounds)
32. Element (Contain all same atoms although held together through chemical means they are not compounds)
Which of the following is the best explanation for why it is important to follow lab safety guidelines
a. Following laboratory safety guidelines prevents all lab accidents.
b. Following laboratory safety guidelines minimizes the chance of lab ac
C. Following laboratory safety guidelines prevents fires.
d. Following laboratory safety guidelines allows quick response during la
Please select the best answer from the choices provided
Answers
Answer:
B
Explanation:
The main aim of lab rules is to minimize the no of accidents
g When a 2.75g sample of liquid octane (C8H18) is burned in a bomb calorimeter, the temperature of the calorimeter rises from 22.0 °C to 41.5 °C. The heat capacity of the calorimeter, measured in a separate experiment, is 6.18 kJ/°C. Determine the ΔE for octane combustion in units of kJ/mol octane.
Answers
Answer:
The correct answer is 5021.25 kJ/mol octane
Explanation:
The heat absorbed by the calorimeter is given by:
heat absorbed = Ccal x ΔT
Given:
Ccal = 6.18 kJ/ºC (heat capacity of calorimeter)
ΔT= Final temperature - initial temperature = 41.5ºC-22.0ºC = 19.5ºC
We first calculate the heat absorbed:
heat absorbed = 6.18 kJ/ºC x 19.5ºC = 120.51 kJ
The change in internal energy (ΔE) is equal to the heat absorbed by the calorimeter. In order to determine ΔE in kJ/mol we have to divide the heat into the number of moles of octane (C₈H₁₈) burned in the calorimeter.
Molecular weight (C₈H₁₈) = (12 g/mol x 8) + (1 g/mol x 18) = 114 g/mol
Moles of C₈H₁₈= mass/molecular weight= (2.75 g)/(114 g/mol)= 0.024 moles
Finally, we calculate ΔE:
ΔE = heat absorbed/moles of octane = (120.51 kJ)/(0.024 mol octane) = 5021.25 kJ/mol octane
Which type of river is similar to a mature river, but flows more slowly so has less power to change the landscape? Select one: a. Youthful River b. Mature River c. Old Age River
Answers
Answer:
The correct option is;
C. Old Age River
Explanation:
Among the three stages of the development of a river, which are the youthful, mature, and old age stages, the old age river is least dynamic
The water is very slow moving with a low gradient and lesser erosive power to alter the landscape which results in the appearance of flood planes
Examples of old age rivers include, lower Ganges, lower Nile, Indus, and Yellow rivers
Old age rivers are characterized by a broad shape, with a wide flood plane, a very gentle gradient and the water current is low.
Answer:c
Explanation:
old age river
What letter represents the enthalpy of reaction?
Answers
Answer:
Option D. T
Explanation:
Enthalpy change (ΔH) is simply the difference between the heat content of the product (Hp) and the heat content of the reactant (Hr). Mathematically, it is expressed as:
Enthalpy change (ΔH) = Heat of product (Hp) – heat of reactant (Hr)
ΔH = Hp – Hr
From the diagram given above, the difference between the heat content of product and the heat content of reactant is T.
Therefore, the enthalpy change of the reaction is T.
Select the correct answer.
What is the reason for heat transfer from one substance to another
Answers
Answer:
Difference in temperature.
Explanation:
Conduction is the movement of heat energy through a substance or from one substance to another by direct contact of atoms and molecules. Heat moves directly from one molecule to another. The heat energy speeds up the movement of the atoms and they collide with other molecules setting them into faster motion.
The freezing point of pure chloroform is -63.5°C, and its freezing point depression constant is 4.07°C•kg/mol. If the freezing point of a solution of benzoic acid in chloroform is -70.55°C, what is the molality of this solution? 0.58 m 1.7 m 16 m 17 m
Answers
Answer: The molality of this solution is 1.7 m
Explanation:
Depression in freezing point:
[tex]T_f^0-T^f=i\times k_f\times m[/tex]
where,
[tex]T_f[/tex] = freezing point of solution = [tex]-70.55^0C[/tex]
[tex]T_f^0[/tex] = freezing point of pure chloroform = [tex]-63.5^0C[/tex]
[tex]k_f[/tex] = freezing point constant of benzene = [tex]4.07^0Ckg/mol[/tex]
m = molality
i = Van't Hoff factor = 1 (for non-electrolyte)
[tex]-63.5-(-70.55)^0C=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]7.05=1\times 4.07^0Ckg/mol\times m[/tex]
[tex]m=1.7[/tex]
Thus the molality of this solution is 1.7 m
Help me pls!
What is heliuim?
Answers
Answer:
it's a chemical Element
Explanation:
symbol He
atomic number 2.
To make a table of elements, dmitri
Answers
The question is incomplete, the complete question is;
To make a table of the elements, dimitri Mendeleev sorted the elements according to their?
Answer:
Atomic weights
Explanation:
Dimitri Medeleeve is a Russian scientist who worked assiduously on the project of developing a system of classifying all the elements. His periodic table was filled with spaces as many atoms weren't yet discovered. 'Eka' prefix was used to name some elements whose properties closely resembled that of their predecessors in Mendeleev's system of classification.
The dependence of the atomic properties on the weight of the atom was the basis for Mendeleeves' original classification. According to Medeleeve, elements having similar chemical properties are also expected to have similar atomic weights and their atomic weights was found to increase regularly.
The Mendeleeve concept of periodic arrangement of elements is the closest precursor of the modern periodic table as it is used in chemistry. Mendeleev arranged the elements in order of increasing relative atomic mass .
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change
that must happen at the molecular level?
ОООО
The molecules move more quickly and their average kinetic energy increases.
The molecules move more slowly and their average kinetic energy decreases.
The molecules move more quickly and their average kinetic energy decreases.
The molecules move more slowly and their average kinetic energy increases.
Answers
Answer:
The molecules move more slowly and their average kinetic energy decreases
Explanation:
The increased temperature meant that the atoms in liquid had a greater average energy of motion so as the temperature decreases the reaction would be inverse.
The branch of science which deals with the chemicals bond is called chemistry.
The correct option is B.
The energy which is produced by the motion of the particles is called kinetic energy. Temperature increases the motion of the particles. So, the kinetic energy increases when the temperature rises.
According to the question, the temperature of the water decreases therefore the kinetic energy decreases.
Hence, the correct option is B that is the molecules move more slowly and their average kinetic energy decreases.
For more information, refer to the link:-
https://brainly.com/question/25026730
What is the unit charge on each subatomic particles
Answers
Answer:
Protons, Electrons, Neutrons
Explanation:
Neutron: 0 or Neutral
Electron: -1 or Negative
Proton: +1 or Positive
For proton and neutron look at neutr for neutral and p for positive
Answer:
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
The answer is Protons, Electrons, Neutrons
There is three of them.....
Hope this will help you
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Explanation:
Which statement accurately describes a light-year
Answers
Answer:
B. distance light travels in a year
got it on edge :)
The statement which accurately and best describes a light-year is the total distance which light travels in a complete year
What is velocity of light?Velocity of light can simply be defined as that fundamental constant that represents the speed of electromagnetic radiation in a vacuum.
The velocity of light = 2.9979 × 10^10cm/s
So therefore, the statement which accurately and best describes a light-year is the distance which light travels in a complete year
Learn more about light-year:
https://brainly.com/question/1224192
#SPJ2
An antacid tablet has a pH of about 9.5 which
means it is considered to be in the _____
range.
Acidic or basic
Answers
Answer:
Basic
Explanation:
The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.
Acids have many hydrogen ions. Acids have a pH of less than 7.
Bases have fewer hydrogen ions and more hydroxide ions. Bases have a pH of less than 14.
If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.
The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.
Answer:
9.5 is a base
Explanation:
A ph of less than 7 is an acid
7 is neutral
7 to 14 is a base
9.5 is a base
Seawater is highly saline, which means it contains large amounts of dissolved salt. When seawater freezes and icebergs form, the water in the iceberg doesn’t take the salt with it. What effect will this phenomenon have on the concentration of salt in the water around the iceberg?
Answers
Answer:
Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.
Explanation:
Answer:
Because the amount of liquid water decreases and the amount of dissolved salt remains constant, the concentration of salt in the liquid water around the iceberg will increase.
Explanation:
PLATO exact answer
What is the molarity of 0.25 moles of FeCl3 dissolved in 120 ml of solution?
Answers
Answer:
Molarity = 2.0833 M (Approx)
Explanation:
Given:
Number of moles (n) = 0.25
Volume of solution = 120 ml = 0.12 L
Find:
Molarity
Computation:
Molarity = Number of moles (n) / Volume of solution.
Molarity = 0.25 / 0.12
Molarity = 2.0833 M (Approx)
For which of the following reactions will a decrease in pressure shift the equilibrium to the left?
A). 2A2 (g) + B2 (g) --> 2A2B (g)
B). 2AB (g) --> A2 (g)+ B2 (g)
C). 2A2F3 (g) --> 4A (g) + 3F2 (g)
D). 2B (s) + 2HA (aq) --> 2BA (aq) + H2 (g)
Answers
Answer: I just took the test, the answer is A.
Explanation:
Which of the following choices would have a negative entropy change? A. CaCO3(s)−>CaO(s)+CO2(g)
Answers
Answer: N2(g) + 3H2(g)- >2NH3(g) denotes a negative entropy change.
Explanation:
Entropy is defined as the extent of disorder in a system. The degree of entropy is more in a gas and less in a solid.
Here, 1st reaction produces ammonia from nitrogen and hydrogen. We can see that four moles of gases produces 2 moles of gaseous product. So the degree of disorder in the system is decreasing. So the entropy is also decreasing.
How many moles are in 10.23 g of PO4-3? How many moles are 8.25 x 10^28 molecules of Na2CO3? What is the mass of 6 moles of CH2O? How many formula units are in 6.34 g of NaCl? How many ions are in 0.25 moles of Cu+2? How many grams are in 3.4 x 10^24 molecules of CH4? How many moles are in 10 mL of water (density of water = 1 g/mL)? (sorry for so many questions in one)
Answers
Answer:
1) 0.1077 moles
2) 137043.2 moles
3) 180.186 grams
4) 6.53×10²² molecules or formula units
5) 1.505×10²³ ions
6) 90.626 grams
7) 0.555 moles
Explanation:
1) The number of moles, n = Mass of the substance/(Molar mass of the substance)
The molar weight of PO₄⁻³ is 94.971 g/mol
The number of moles in 10.23 g of PO₄⁻³ is n =10.23/94.971 = 0.1077 moles
The number of moles in 10.23 g of PO₄⁻³ = 0.1077 moles
2) The number of molecules of Na₂CO₃ in one mole of Na₂CO₃ is given by the Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ molecules
Therefore, the number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ is found by determining how many Avogadro's number of molecules are in 8.25 × 10²⁸ molecules of Na₂CO₃ as follows;
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = (8.25 × 10²⁸)/(6.02 × 10²³) = 137043.2 moles
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = 137043.2 moles
3) The molar mass of CH₂O = 30.031 g/mol
Therefore, the mass of 6 of CH₂O = 6 moles × 30.031 g/mol = 180.186 grams
The mass of 6 of CH₂O = 180.186 grams
4) The molar mass of NaCl = 58.44 g/mol
The number of moles of NaCl in 6.34 g of NaCl 6.34/58.44 = 0.1085 moles
1 formula unit of NaCl = 1 molecule of NaCl
The number of molecules in one mole of a substance = [tex]N_A[/tex] = 6.02 × 10²³
Therefore, the number of molecules in 0.1085 moles of NaCl = 6.02 × 10^(23) × 0.1085 = 6.53×10²² molecules or formula units
5) The number of ions per mole of any substance is give by Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ ions,
The number of ions in 0.25 moles of Cu⁺² = 0.25×6.02 × 10²³ ions = 1.505×10²³ ions
The number of ions in 0.25 moles of Cu⁺² = 1.505×10²³ ions
6) The molar mass of CH₄ = 16.04 g/mol
The number of moles, n, in 3.4×10²⁴ = 3.4×10^(24)/(6.02×10^(23)) = 5.65 moles 5.65*16.04
The mass of 5.65 moles of CH₄ = 5.65 moles × 16.04 g/mol = 90.626 grams
The mass of 3.4×10²⁴ molecules of CH₄ = 90.626 grams
7) The density of water = 1 g/mL
The volume of the water 10 mL
The mass of the water = Volume × Density = 10 mL × 1 g/mL= 10 grams
The molar mass of water = 18.015 g/mol
The number of moles of water in 10 g of water = mass/(Molar mass) = 10/18.015 = 0.555 moles.
The fact that a heat pump requires energy to move heat from a colder object (the outside of a house) to a hotter object (the inside of the house) is a real life observation of which thermodynamic law?
Answers
Answer:
The correct answer is - the second law of thermodynamics.
Explanation:
The second law of thermodynamics says that the in all heat energy exchange or transfer, and if there is no gain or lose of energy in a system, the potential energy of the particular state in that system will less than that of initial state of the system in any case.
It also suggests that the processes deals with the conversion of the heat energy are irreversible and the energy can be transfer from lower temperature system to higher temperate system without adding energy.
Thus, The fact that a heat pump requires energy to move heat from a colder object to a hotter object is a real life example of the second law of thermodynamics.
Adrian loves the pancakes! The problem is, the recipe serves only six, and he has 540 people in his family (including aunts, uncles, and cousins). Now, he needs help increasing the recipe to feed his entire family. However, Adrian is particular - he insists on using only three significant figures with scientific notation.
Answers
Answer:
ingredient. U.s unit. SI unit. SI unit(540)
flour. 2cups. ²/6. 180cups = 1.8×10²
milk. 2cups. ²/6. 180cups. =1.8×10²
eggs. 2. ²/6. 180eggs. =1.8×10²
melted butter. ⅓cup ¹/18. 30cups. =3×10¹
sugar. 1spoon. ¹/6. 90spoons. =9×10¹
baking powder 2spoons ²/6. 180spoons. =1.8×10²
salt. ½spoon. ¹/12. 45spoons. =4.5×10¹
Explanation:
1) to get the SI unit divide the U.S unit by 6
example:eggs = 2÷6. =²/6
2) to get the SI unit for 540 people ,multiply the SI unit by 540.
example:eggs ²/6×540. = 180
3)convert the answers to scientific notation
example:eggs =180. =1.8×10²
Which of the following may suggest a catalyst has been used in a reaction, given the energy diagram for the same reaction without a catalyst?
Answers
Ascorbic Acid is a organic compound with formula C6H8O6, originally called Hexuronic Acid. It's a white solid, but impure samples can be yellowish. It dissolves well in water to give mildly acidic solutions. It is a mild reducing agent.
What is the other name of Ascorbic Acid?
Answers
Explanation:
ascorbic acid is lemon
lemon contain ascorbic acid....
it is organic acid.....
If the external vapor pressure is 2.0 atm , what is the vapor pressure of the water at its boiling point?
Answers
Answer:
22
Explanation:
22
how many moles are in 8.5 x 10^25 molecules of CO2
Answers
Answer:
the answer is 5.1 1049 mol.
A stone bead and an iron bead are dropped into a cup of water. They both sink to the bottom of the cup. What can be said about these beads?Immersive Reader
Answers
Answer:
Both have densities greater than that of water
Explanation:
The ability of objects to either float or sink in a liquid depends on their relative densities.
If an object is denser than a liquid it will completely sink in it, but if the density of the object is less than that of the liquid, it will sink until the weight of liquid displaced is equal to the weight of the object, then it will finally float in that liquid.
In the case of the stone bead and iron beads dropped into a cup of water, hey both sank to the bottom because they are denser than water.
How many moles of ZnCl2 will be produced from 61.0 g of Zn, assuming HCl is excess?
Answers
Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
moles of zinc:
[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]
[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
As HCl is in excess , zinc is the limiting reagent and it limits the formation of product.
According to stoichiometry :
1 mole of Zn produce = 1 mole of [tex]ZnCl_2[/tex]
Thus moles of Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]
Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Below are 5 sets of potential solutes for you to compare. Both members of each pair are very soluble in water. If you had equal molar concentrations of each solution, which member of each pair would theoretically be the better conductor of electricity?
A. CsCl, CaCl2.
B. CaS, Li2S.
C. KBr, AlCl3.
D. AlCl3, MgC2.
E. KI, K2S.
Answers
Answer:
Option D. AlCl₃, MgC₂
Explanation:
We need to dissociate all the salts, to determine the i. (Van't Hoff factor).
The salt who has the highest value, will be the better conductor of electricity
CsCl → Cs⁺ + Cl⁻ i = 2
CaCl → Ca²⁺ + Cl⁻ i = 2
CaS → Ca²⁺ + S⁻² i = 2
Li₂S → 2Li⁺ + S⁻² i = 3
KBr → K⁺ + Br⁻ i = 2
AlCl₃ → Al³⁺ + 3Cl⁻ i = 4
MgC₂ → Mg²⁺ + 2C⁻ i = 3
KI → K⁺ + I⁻ i = 2
K₂S → 2K⁺ + S⁻² i = 3
The biggest i, is in pair D.
Answer:
Look at the Screenshot!!!
Explanation:
Got it right on Odessyware ;) Have a nice day!!!!!