what is a type of atom that can be bonded with water and hydrogen

The final temperature is -160°C

We can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P₁V₁)/T₁ = (P₂V₂)/T₂

Where

In this case, we can assume that the pressure of the gas is constant, since it is not given in the problem statement. So we can simplify the equation to:

(V₁/T₁) = (V₂/T₂)

Where

We are given that the initial volume (V₁) is 80 L and the final volume (V₂) is twice that, or 160 L. We are also given that the initial temperature (T₁) is -40°C. To find the final temperature (T₂), we can plug these values into the equation:

(V₁/T₁) = (V₂/T₂)

(80 L)/(-40°C) = (160 L)/T₂

Simplifying:

-2 L/°C = (160 L)/T₂

Multiplying both sides by -1°C/2 L (the reciprocal of -2 L/°C):

1/2 = (T₂)/(160 L) x (-1°C/2 L)

1/2 = -T₂/320

Multiplying both sides by -1 to isolate T₂:

-1/2 = T₂/320

T₂ = -160°C

Therefore, the final temperature is -160°C.

Learn more about combined gas law here : brainly.com/question/11296079

#SPJ1

The new volume of the helium sample would be 2.4 L.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvins.

At STP (standard temperature and pressure), which is defined as 0°C (273.15 K) and 101.325 kPa, the volume of 2.0 liters of helium gas contains one mole of helium atoms.

To find the new volume of the helium sample when the temperature is increased to 27°C (300.15 K) and the pressure is decreased to 80 kPa, we can use the following equation:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

Plugging in the values, we get:

(101.325 kPa)(2.0 L)/(273.15 K) = (80 kPa)(V2)/(300.15 K)

Solving for V2, we get:

V2 = (101.325 kPa)(2.0 L)/(273.15 K) * (300.15 K)/(80 kPa) = 2.36 L

Therefore, the new volume of the helium sample is approximately 2.4 L (rounded to the nearest tenth).

More on gas laws can be found here: https://brainly.com/question/27009857

#SPJ1

To calculate the cell potential, Ecell, for the given reaction at 298K, we need to use the Nernst equation. The Nernst equation relates the cell potential to the standard cell potential, temperature, and the concentrations of the reactants and products. The Nernst equation is given as follows:

Ecell = E°cell - (RT/nF) ln(Q)

where,

Ecell = cell potential

E°cell = standard cell potential

R = gas constant (8.314 J/K.mol)

T = temperature (298 K)

n = number of electrons transferred in the balanced redox reaction

F = Faraday constant (96,485 C/mol)

Q = reaction quotient

The given reaction is a redox reaction, which involves the transfer of two electrons from Co to Ag+. The balanced half-reactions are as follows:

Co(s) → Co2+(aq) + 2 e-

Ag+(aq) + e- → Ag(s)

The standard reduction potentials for these half-reactions are:

Co2+(aq) + 2 e- → Co(s) E°red = -0.28 V

Ag+(aq) + e- → Ag(s) E°red = +0.80 V

The overall standard cell potential can be calculated by subtracting the standard reduction potential of the anode from that of the cathode:

E°cell = E°red,cathode - E°red,anode

= +0.80 V - (-0.28 V)

= +1.08 V

Now we need to calculate the reaction quotient Q using the concentrations of the reactants and products. According to the given information, [Ag+] = 0.010 M and [Co2+] = 0.015 M.

Q = ([Co2+][Ag+]^2)/([Ag+]^2)

= ([0.015][0.010]^2)/([0.010]^2)

= 0.015 M

Substituting the values in the Nernst equation, we get:

Ecell = E°cell - (RT/nF) ln(Q)

= 1.08 - (8.314 x 298 / (2 x 96485)) ln(0.015)

= 0.829 V

Therefore, the cell potential, Ecell, for the given reaction at 298K is 0.829 V.

Component form of the vector v is as follows: 4 3 1.5 1 Using the standard basis vectors I and j), express the vector w as follows: 3 two 1 4 pp . 1 3 w 3.5 C. V plus w= d. Determine the vector v's magnitude

What does "vector" mean?

Latin word for "carrier" is "vector." Point A is transported to point B by vectors. The orientation of the vectors AB is the direction in which point A is moved in relation to point B, and the amplitude of the vector is the width of the line connecting the two locations A and B. The terms Euclidean vectors and spatial vectors are also used to refer to vectors.

A vector space is what?

A vector space, also known as a linear space, is a collection of things called vectors that can be added to and multiplied ("scaled") by figures called scalars in the fields of mathematics, physics, and engineering.

To know more about vector visit:

https://brainly.com/question/27854247

#SPJ1

0.02314 moles of  NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.

The balanced equation for the decomposition of dinitrogen pentoxide is:

2 N₂O₅ → 4 NO₂ + O₂

The molar mass of N₂O₅  is 108.01 g/mol.

To determine the number of moles of N₂O₅  present in 1.25 g, we use the following calculation:

moles N₂O₅  = mass / molar mass

moles N₂O₅ = 1.25 g / 108.01 g/mol

moles N₂O₅ = 0.01157 mol

From the balanced equation, we can see that 2 moles of N₂O₅  decompose to form 4 moles of NO2. Therefore, the number of moles of NO2 produced can be calculated as:

moles  NO₂ = (0.01157 mol N2O5) × (4 mol NO2 / 2 mol N2O5)

moles  NO₂ = 0.02314 mol

Therefore, 0.02314 moles of  NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.

learn more about moles here

https://brainly.com/question/29367909

#SPJ1

Around 80.5 KJ

Multiply Heat of Fusion and Mass to get the q value.

The pH of the solution can be calculated using the following steps:

Write the chemical equation for the dissociation of ethanoic acid:

CH3COOH + H2O ⇌ CH3COO- + H3O+

Write the equilibrium expression for the dissociation of ethanoic acid:

Ka = [CH3COO-][H3O+] / [CH3COOH]

Since the solution is equimolar in CH3COOH and CH3COO-, we can assume that the initial concentrations of CH3COOH and CH3COO- are equal. Let's use the variable x to represent the concentration of CH3COO- and CH3COOH in mol/L.

[CH3COOH] = x mol/L [CH3COO-] = x mol/L

Since CH3COOH is a weak acid, we can assume that only a small fraction of it dissociates in water. Let's use the variable y to represent the concentration of H3O+ ions in mol/L that are produced from the dissociation of CH3COOH. From the dissociation of ethanoic acid, we know that [CH3COO-] = [H3O+].

[CH3COO-] = y mol/L [H3O+] = y mol/L

Use the equilibrium expression to solve for the concentration of H3O+ ions:

Ka = [CH3COO-][H3O+] / [CH3COOH] 1.79 x 10^-5 = y^2 / x

Solving for y in terms of x, we get:

y = sqrt(Ka * x)

Calculate the pH of the solution using the equation:

pH = -log[H3O+]

pH = -log(y)

Substituting in the value of y from Step 5, we get:

pH = -log(sqrt(Ka * x))

Simplifying, we get:

pH = -0.5 * log(Ka * x)

Substituting in the value of Ka, we get:

pH = -0.5 * log(1.79 x 10^-5 * x)

Now we can calculate the pH for the solution by substituting the value of x as it is equimolar.

pH = -0.5 * log(1.79 x 10^-5 * x)

pH = -0.5 * log(1.79 x 10^-5 * 1)

pH = -0.5 * log(1.79 x 10^-5)

pH = 4.74

Therefore, the pH of an equimolar solution of ethanoic acid and Na+CH3COO- is 4.74.

nuclear type of process is this

The content of a physical reaction differs from that of a chemical reaction. A chemical reaction changes the makeup of the substances in question; a physical change changes the look, smell, or plain presentation of a sample of matter without changing its content.

Nuclear reactions are not the same as chemical reactions. Atoms become more stable in chemical processes by engaging in electron transfers or by sharing electrons with other atoms.

learn more about Nuclear reactions

https://brainly.com/question/25387647

#SPJ1

The independent and dependent variables are compounds and elements, respectively.

Elements and compounds make up everything in our surroundings. Knowing how things operate can aid in our ability to comprehend our surroundings.

Water is one of the chemicals listed in the table (H2O). This molecule has 3 atoms, which can be broken down into 2 hydrogen (H) atoms and 1 oxygen atom (O).

Several compounds can be created by mixing the same two elements' atoms in different ratios.

Because these elements mix in various ways and in various quantities to create unique compounds, we have a huge variety of compounds in this universe.

To learn more about chemical compounds visit:

brainly.com/question/12166462

#SPJ1

The reaction's G value at 805 K is -2625.7 kJ.

Sulfur dioxide gas is the byproduct of the interaction between sulphur and oxygen. Sulphurous acid is created when sulphur dioxide dissolves in water. Sulfuric acid causes blue litmus paper to turn red. Non-metal oxides typically have an acidic character.

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, ΔS is the entropy change, T is the temperature in Kelvin, and ΔG is the change in Gibbs free energy.

Substituting the given values:

ΔG = -2374 kJ - (805 K)(312.2 J/K)

ΔG = -2374 kJ - 251717 J

ΔG = -2374 kJ - 251.7 kJ

ΔG = -2625.7 kJ

To know more about reaction's visit:-

https://brainly.com/question/28984750

#SPJ1

To draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.

If we assume that the larger circle represents the Earth, then the diameter of the Earth would be 30 times the diameter of the smaller circle representing the moon. Let's say that the diameter of the smaller circle is x. Then the diameter of the larger circle (Earth) would be 30 times x or 30x.

To find the correct distance from Earth to the moon at this scale, we need to know the actual distance from Earth to the moon, which is approximately 238,855 miles or 384,400 kilometers. If we divide this distance by the scale factor of 30, we get:

238,855 miles / 30 = 7,961.8 miles

Therefore, the diameter of the smaller circle (moon) would be approximately 7,961.8 miles / π = 2,532.5 miles (rounded to one decimal place). And the diameter of the larger circle (Earth) would be 30 times that or 75,974.4 miles

So, to draw the two circles, we would need to draw a smaller circle with a diameter of 2,532.5 miles (representing the moon) and a larger circle with a diameter of 75,974.4 miles (representing the Earth) that is 30 times larger than the smaller circle.

Learn more about Earth at:

https://brainly.com/question/19581790

#SPJ1

It requires 10.15 kilojoules of energy.

The term "vaporisation" (or "evaporation") often refers to the transformation of a liquid's condition into a vapour phase below its boiling point. The phrase, however, can also refer to the process of removing a solvent, independent of the temperature used.

When a body moves to exert force, it is said to be exerting work. Energy is the capacity to accomplish work. Energy is something we always need, and it can take many different forms.

If the gold is present in the liquid state, you only have to determine the latent heat of vaporization, or lvap. The empirical data for gold is 330 kJ/mol.

Q = mlvap

Q = (2 kg)(1 kmol/197 kg)(1,000 mol/1 kmol)

Q = 10.15 kJ

It needs an energy of 10.15 kilojoules

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

Taking into account definition of percent yield, the correct answer is option c): the percent yield for the reaction is 0.947.

In first place, the balanced reaction is:

CH₄ + 2 O₂ → CO₂ + 2 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 16.05 grams of CH₄ form 44.01 grams of CO₂, 136 grams of CH₄ form how much mass of CO₂?

mass of CO₂= (136 grams of CH₄× 44.01 grams of CO₂)÷16.05 grams of CH₄

mass of CO₂= 372.92 grams

Then, 372.92 grams of CO₂ can be produced from 136 grams of CH₄.

The percent yield is the ratio of the actual return to the theoretical return expressed as a percentage and this is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:

percent yield= (actual yield÷ theoretical yield)× 100%

where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product.

In this case, you know:

Replacing in the definition of percent yield:

percent yield= (353 grams÷ 372.92 grams)× 100%

Solving:

percent yield= 94.7%= 0.947

Finally, the percent yield for the reaction is 0.947.

Learn more about percent yield:

brainly.com/question/14408642

#SPJ1

I would say C

Since the nitro group (NO2) contains a positively charged nitrogen atom, it tends to attract electron from the aromatic ring and, therefore, the other group/atom. In the first case, I think piridine (II) makes a stronger bond with water since the nitrogen in the aromatic ring needs its electrons in order to be have a slight negative charge that can interact with the slightly positive charged hydrogen atom in water. If the nitro group is present, it will attract to some extent the electrons of the nitrogen atom in the ring, thus making the H-bond less stronger.

In the second case the hydrogen, which is slightly positive, of the OH group interacts with the oxygen, which is slightly negative, of water. If the nitro group is present, it will attract the electrons of oxygen of the hydroxyl group, therefore making the bond between the oxygen and the hydrogen more polar (which basically means that the bonding electron of hydrogen is even more attracted by the oxygen atom) making the hydrogen atom more positive, which means that the H-bond will be stronger

Answer:

To calculate Δ∘rxn, we can use the following formula:

ΔG∘rxn = ΔH∘rxn - TΔS∘rxn

where ΔH∘rxn is the enthalpy change of the reaction, T is the temperature in Kelvin, and ΔS∘rxn is the entropy change of the reaction.

We know that ΔH∘rxn = -44.2 kJ and we want to find ΔS∘rxn at 25.0 ∘C (298 K). We can use the following formula to calculate ΔS∘rxn:

ΔG∘rxn = -RTlnK

where R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, and K is the equilibrium constant.

We can find K using the following formula:

ΔG∘rxn = -RTlnK K = e^(-ΔG∘rxn/RT)

We know that ΔG∘rxn = -44.2 kJ/mol and R = 8.314 J/mol K, so we can calculate K:

K = e^(-(-44.2 kJ/mol)/(8.314 J/mol K * 298 K)) K = 1.9 x 10^7

Now we can use K to calculate ΔS∘rxn:

ΔG∘rxn = -RTlnK ΔS∘rxn = -(ΔH∘rxn - ΔG∘rxn)/T ΔS∘rxn = -((-44.2 kJ/mol) - (-8.314 J/mol K * 298 K * ln(1.9 x 10^7)))/(298 K) ΔS∘rxn = -0.143 kJ/K

Therefore, ΔS∘rxn is -0.143 kJ/K.

To determine whether the reaction is spontaneous at 25 ∘C and standard pressure, we can use Gibbs free energy (ΔG). If ΔG < 0, then the reaction is spontaneous in the forward direction; if ΔG > 0, then it is spontaneous in the reverse direction; if ΔG = 0, then it is at equilibrium.

We know that ΔG∘rxn = -44.2 kJ/mol and T = 25 ∘C (298 K). We can use the following formula to calculate ΔG:

ΔG = ΔG∘ + RTlnQ

where Q is the reaction quotient.

At equilibrium, Q = K (the equilibrium constant). Since we calculated K earlier to be 1.9 x 10^7, we can use this value for Q.

ΔG = ΔG∘ + RTlnQ ΔG = (-44.2 kJ/mol) + (8.314 J/mol K * 298 K * ln(1.9 x 10^7)) ΔG = -43.6 kJ/mol

Since ΔG < 0, the reaction is spontaneous in the forward direction at 25 ∘C and standard pressure.

Answer:

Neutrons and Protons

Explanation:

Different elements can have subatomic particles of varying sizes. The size of an atom is defined by the size of its electron cloud, which is composed of electrons, and the size of its nucleus, which is composed of protons and neutrons. The atomic number and subsequently the identity of an element are determined by the number of protons in the nucleus. The quantity of protons and neutrons in the nucleus determines its size. The quantity of electrons in the electron cloud and the energy levels they are located at define its size. The size of atoms can differ depending on the element due to differences in the amount of protons, neutrons, and electrons.

The moles of ammonium fluoride initially added in this experiment was 0.0216 moles.

Mole is a unit of measurement that is used in chemistry to measure the amount of a substance. It is a very important unit of measurement because it allows chemists to accurately measure the amount of a substance that is being used in a reaction. The mole is defined as the amount of a substance that contains the same number of particles as there are atoms in 12 grams of carbon-12..

First, we need to calculate the moles of calcium nitrate in the solution. We can do this by using the molarity and volume of the solution:
(4.61x10⁻¹ M)*(4.479x10¹ mL) = 0.0216 moles of calcium nitrate
(0.731 g)*(1 mol/55.847 g) = 0.0131 moles of calcium fluoride
(0.0216 moles)*(1 mol/1 mol)
= 0.0216 moles of ammonium fluoride
Therefore, the moles of ammonium fluoride initially added in this experiment was 0.0216 moles.

To learn more about mole
https://brainly.com/question/29367909
#SPJ1

The state of matter that tends to have unique factors to consider when discussing solubility compared to the other two states (solid and gas) is the liquid state.

Solubility refers to the ability of a substance (solute) to dissolve in a particular solvent to form a homogeneous mixture (solution). Various factors can affect the solubility of a substance, including temperature, pressure, and the nature of the solute and solvent.

In the case of liquids, the unique factor to consider when discussing solubility is often temperature. The solubility of many solid solutes in liquids generally increases with increasing temperature. This is because higher temperatures provide more energy to break the intermolecular forces between solute particles, allowing them to disperse more evenly throughout the solvent.

Learn more about solubility:

https://brainly.com/question/23946616

#SPJ1

The eutectic point is the lowest temperature at which the liquid phase is constant at a particular pressure.

A melting composition known as a eutectic consists of at least two components that melt and freeze at the same rates. The components combine during the crystallisation phase, operating as a single component as a result.

The eutectic is the system's lowest melting point under its own pressure; it has a matching temperature called the eutectic temperature and produces the eutectic liquid as a result. In terms of composition, eutectic liquids are located between the system's solid phases.

To know more about eutectic visit:-

https://brainly.com/question/27886492

#SPJ1

Answer:

colloid

Explanation:

there's no explanation

Answer:

-191 kJ

Explanation:

The given reaction is:

N₂(g) + 3H₂(g) → 2NH₃(g) ΔH = -76.4 kJ/mol

From the balanced equation, we can see that the stoichiometric ratio between hydrogen (H₂) and ammonia (NH₃) is 3:2. This means that 3 moles of hydrogen react to produce 2 moles of ammonia.

To determine the heat energy when 5.0 g of hydrogen (H₂) burns, we need to follow these steps:

Step 1: Calculate the moles of hydrogen (H₂)

Using the molar mass of hydrogen (H₂), which is 2 g/mol, we can calculate the moles of hydrogen (H₂) in 5.0 g of hydrogen:

Moles of H₂ = Mass of H₂ / Molar mass of H₂

Moles of H₂ = 5.0 g / 2 g/mol

Moles of H₂ = 2.5 mol

Step 2: Use the stoichiometry of the reaction

Based on the stoichiometry of the reaction, we know that 3 moles of hydrogen (H₂) react to produce 2 moles of ammonia (NH₃), and the enthalpy change (ΔH) is -76.4 kJ/mol.

Step 3: Calculate the heat energy

The heat energy for 2.5 moles of hydrogen (H₂) can be calculated using the given enthalpy change (ΔH) and the stoichiometry of the reaction:

Heat energy = Moles of H₂ x ΔH

Heat energy = 2.5 mol x -76.4 kJ/mol

Heat energy = -191 kJ (rounded to three significant figures)

So, the heat energy when 5.0 g of hydrogen (H₂) burns is -191 kJ (rounded to three significant figures), and the negative sign indicates that the reaction is exothermic, releasing heat.

Answer: C)Deposition (gas to solid)

Explanation: According to the phase diagram, at room temperature (25°C) and 1 atm, the sample is in the gas phase.  As the temperature decreases to 80 K, it falls below the sublimation curve. T he sublimation curve represents the conditions at which a substance can change directly from a solid to a gas or from a gas to a solid without passing through the liquid phase.

Since the sample is in the gas phase at room temperature, cooling it to 80 K would cause it to go through the process of deposition, where the gas particles directly transform into a solid without first becoming a liquid.  This is indicated by the section of the phase diagram below the sublimation curve.

The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.

To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.

Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

Answer:

silicon dioxide,xenon

Explanation:

Answer:

140.3 *C

Explanation:

(P1 * V1) / T1 = (P2 * V2) / T2

where P1 = 3.000 atm, V1 = 200.0 ml, T1 = 37.0°C + 273.15 = 310.15 K, P2 = 2.000 atm, V2 = 400.0 ml.

Substituting these values into the formula gives:

(3.000 atm * 200.0 ml) / 310.15 K = (2.000 atm * 400.0 ml) / T2

Solving for T2 gives:

T2 = (2.000 atm * 400.0 ml * 310.15 K) / (3.000 atm * 200.0 ml)

T2 ≈ 413 K or 140°C.

The concentrations of all species in a 0.510 M NaCH₃COO (sodium acetate) solution: [Na+]= 0.510 M , [OH-]= 1.8x10⁻⁵ M , [H₃O+]= 1.8x10⁻⁵ M , [CH₃COO-]= 0.510 M and [CH₃COOH]= 0.510 - (1.8x10⁻⁵) = 0.50982 M.

Concentration is the ability to focus your attention on a single task or thought for a prolonged period of time. It involves being able to ignore distractions and to be able to work through any difficulties or obstacles that may arise. Concentration is an important skill to master in order to achieve success in any endeavor, whether it be academic, professional, or personal. Good concentration can help you to stay focused, organized, and productive. When you are able to concentrate, you can take in the information needed to make better decisions and solve problems. Concentration is a skill that can be developed with practice, such as by setting goals, breaking down tasks into smaller, manageable pieces, and avoiding distractions.

To learn more about concentration
https://brainly.com/question/29330415
#SPJ1

The Ammonium Chloride solution at 0.25 M has a pH of 2.67.

As a result, the weak basic (Chlorine) in the solution is overpowered by the conjugate acid (Ammonium cation), making the solution mildly acidic. According to the equation pH =log[Hydrogen ion], an acidic solution has a pH lower than 7. Aqueous ammonium chloride solution has a pH that is less than 7.

Ammonium cation + Water ⇌ Nitrogen trihydride + Hydronium ion

Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]

[Nitrogen trihydride] = [Hydronium ion] = x

[Ammonium cation] = 0.25 - x

Kb = [Nitrogen trihydride][Hydronium ion] / [Ammonium cation]

1.8 × 10–5 = x² / (0.25 - x)

1.8 × 10–5 = x² / 0.25

x² = 4.5 × 10–6

x = 2.12 × 10–3

pH = -log[Hydronium ion] = -log(2.12 × 10–3) = 2.67

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Answer:

2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)

(a) mol of NH₃ required = 1.333 mol; mol of F₂ required = 3.333 mol

(b) mass of F₂ required = 142.5 g

(c) N₂F₄ produced = 10.38 g

Explanation:

2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)

What is Stoichiometry?

In chemical equations, unless stated otherwise, the reactants and products will theoretically always remain in stoichiometric ratios.

The stoichiometry of a reaction is the relationship between the relative quantities of products and reactants, typically a ratio of whole integers.

Consider the following chemical reaction: aA + bB ⇒ cC + dD.

The stoichiometry of reactants to products in this reaction is the ratio of the coefficients of each species: a : b : c : d.

Converting between moles and mass:

To convert from mass to moles, divide the mass present by the molar mass, resulting in the number of moles.

Thence, the formula for moles: n = m/M, where n = number of moles, m = mass present, and M = molar mass. This formula can be easily rearranged to find mass present from molar mass and moles, or molar mass from mass and moles.

a. How many moles of each reactant are needed to produce 4.00 moles of HF?

In the given chemical equation, the stoichiometry of the reaction is

2 : 5 : 1 : 6. Therefore, for every 2 moles of NH₃, we require 5 moles of F₂, which will produce 1 mole of N₂F₄ and 6 moles of HF.

mol of NH₃ required = 1/3 × mol of HF = 1.333 mol

mol of F₂ required = 5/6 × mol of HF = 3.333 mol

b. How many grams of F₂ are required to react with 1.50 moles of NH₃?

Using stoichiometry again: mol of F₂ required = 5/2 × mol of NH₃

∴ F₂ required = 3.75 mol.

Then we can convert this to mass: m = nM = (3.75)(2×19.00) = 142.5 g

c. How many grams of N₂F₄ can be produced when 3.40 grams of NH₃ reacts?

Converting mass to moles: n = m/M = 3.40/(14.01+1.008×3) = 0.1996 mol

Using stoichiometry again: mol of N₂F₄ produced = 1/2 × mol of NH₃

∴ N₂F₄ produced = 0.0998 mol

converting moles to mass: m = nM = (0.0998)(14.01×2+19.00×4)

∴ N₂F₄ produced = 10.38 g

The density of sulfur dioxide gas at a temperature of 15°C and pressure of 300 torr is 0.001022 g/cm³, or 0.001022 g/mL, or 1.022 kg/m³, or 0.01022 g/L when converted to atm.

What is density?

To calculate the density of sulfur dioxide gas at a temperature of 15°C and a pressure of 300 torr, we can use the ideal gas law:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.

First, we need to convert the given temperature of 15°C to Kelvin:

T = 15°C + 273.15 = 288.15 K

Next, we can rearrange the ideal gas law to solve for the number of moles:

n = PV/RT

where we can use the given pressure of 300 torr and convert it to atm by dividing by 760 torr/atm:

P = 300 torr / 760 torr/atm = 0.3947 atm

Substituting the values into the equation, we get:

n = (0.3947 atm) V / (0.08206 L·atm/(mol·K) × 288.15 K)

Now, we can use the molar mass of sulfur dioxide, which is 64.06 g/mol, to convert the number of moles to mass:

mass = n × molar mass

Finally, we can calculate the density of sulfur dioxide gas using the mass and volume:

density = mass / V

To convert the density from g/L to g/cm³, we divide by 1000.

Putting it all together, we get:

n = (0.3947 atm) V / (0.08206 L·atm/(mol·K) × 288.15 K)

n = 0.01595 V

mass = n × molar mass = 0.01595 V * 64.06 g/mol = 1.022 gV

density = mass / V = 1.022 gV / V = 1.022 g/L = 0.001022 g/cm³

Therefore, the density of sulfur dioxide gas at a temperature of 15°C and pressure of 300 torr is 0.001022 g/cm³, or 0.001022 g/mL, or 1.022 kg/m³, or 0.01022 g/L when converted to atm.

To know more baout density, visit:

https://brainly.com/question/25925922

#SPJ1

Complete question is: The density of Sulfur dioxide gas at a temperature of 15oC and pressure of 300 torr is 0.01022 atm.