Answer:
False
Explanation:
Chemists make a distinction between two different types of changes that they study—physical changes and chemical changes. Physical changes are changes that do not alter the identity of a substance. Chemical changes are frequently harder to reverse than physical changes.
A container holds 100.0 mL of nitrogen at 21° C and a pressure of 736 mm Hg. What will be its volume if the temperature increases by 35° C?
Answer:
V₂ = 104.76 mL
Explanation:
Given data:
Initial volume = 100.0 mL
Initial temperature = 21°C (21 + 273.15 K = 294.15 K)
Final temperature = 35°C (35 + 273.15 K = 308.15 k)
Final volume = ?
Solution:
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ =100.0 mL × 308.15 K / 294.15 K
V₂ = 30815 mL.K /294.15 K
V₂ = 104.76 mL
When a precipitation reaction occurs, the ions that do not take part in the reaction are called
A.non participants
B.useless ions
C.independent variables
D.spectator ions
Answer:
D. spectator ions.
Explanation:
Hello!
In this case, when going over net ionic equations by which precipitation reactions are analyzed, we can consider the example of lead (II) nitrate with potassium iodide to yield insoluble lead (II) iodide and soluble potassium nitrate according to:
[tex]2KI(aq)+Pb(NO_3)_2(aq)\rightarrow PbI_2(s)+2KNO_3(aq)[/tex]
Whereas aqueous species remain in solution:
[tex]2K^+(aq)+2I^-(aq)+Pb^{2+}(aq)+2(NO_3)^-(aq)\rightarrow PbI_2(s)+2K^+(aq)+2(NO_3)^-(aq)[/tex]
It means that potassium and nitrate ions are spectator ions because they are not involved in the precipitation reaction, which is represented by the net ionic one:
[tex]2I^-(aq)+Pb^{2+}(aq)\rightarrow PbI_2(s)[/tex]
Thus, the answer to this question is D. spectator ions.
Best regards!
A clone has _________ chromosomes as its parent.
A. Half the number of
B. The same exact
C. double the number of
D. half of the same
Answer:
B. The same exact
Explanation:
I think B because in order to be a clone of your parent you have to have the exact same DNA and chromosomes.
Hope this helps :D
A clone has the same exact chromosomes as its parent.
CLONING:
Cloning is a genetic procedure in which identical copies of a cell or organism is made. Cloning can be done naturally or artificially, however, it follows the process of mitosis. In cloning, the genetic content of a parent cell is used as a template to replicate another cell or organism. Examples of cloning are biological twins, vegetative reproduction in plants etc. Therefore, a clone has the same exact chromosomes as its parent.Learn more at: https://brainly.com/question/12483409?referrer=searchResults
What is the Molarity of a 2 liter solution containing 43.55 grams of K2504?
Answer:
M = 0.125 M
Explanation:
Given data:
Molarity = ?
Volume of solution = 2 L
Mass of K₂SO₄ = 43.55 g
Solution;
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Number of moles of solute:
Number of moles = mass/molar mass
Number of moles = 43.55 g / 174.26 g/mol
Number of moles = 0.25 mol
Molarity:
M = 0.25 mol / 2 L
M = 0.125 M
In general, weathering tends to occur more rapidly in warm climates than in cool climates. How does this trend explain the effect of temperature on erosion rates?
Answer:
See explanation
Explanation:
Weathering refers to the breakdown of rocks to form soil. There are several agents of weathering.
In warmer regions, there are more vegetation and microorganisms and they increase the rate of biological weathering.
Since weathering leads to the formation of soil and the rate of weathering is greater in warmer climates, it also follows that as temperature increases and more soil is formed, erosion will happen faster at this higher temperature owing to the presence of more soil compared to colder climates.
There is a huge and direct effect of temperature on the rates of erosion.
The highest rate of weathering occurs in warm and wet climate because in warm and wet climatic regions, more rainfall occurs which increase the rate of weathering. Rainfall and temperature can affect the rate in which rock weathering occurs.
High temperatures and greater rainfall increase the rate of chemical weathering. Rocks in tropical regions exposed to abundant rainfall so we can conclude that hot temperatures weather much faster than similar rocks residing in cold, dry regions.
Learn more: https://brainly.com/question/20929061
How does heat travel?
1. From cold things to hotter things
2. From hot things to colder things
3. Between things of the same temperature
Answer:
well heat travels by conduction, convection, and radiation but I think it's 2.
Explanation:
heat travels to colder things trying to make a balanced temperature for both of the objects.
Describe the relationship between kinetic energy and the states of matter?
PLS HELP I DONT SCIENCE HELP ASAP HELP
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
Explanation:
helppp nowwww plsssss!!
Answer:
The sun will appear to rise and set more slowly
have a nice day! (^o^)
(The stands for a number the student is going to calculate.)
The ___________ stands for a number the student is going to calculate. Fill in the missing part of this equation.
(87. 1/mmole. C). ______= _____ kJ/mol.C
Answer:
1000 kJ.mmole / 1000 J.mole
Explanation:
To solve this, we need to analyze the given data.
We have a number which is 87.1 J/mmole.C (I'm assuming it has the J at the beggining because if not, then you are missing some data) and the final result is kJ/mol.C
The only unit that has not changed in the process was the °C, while the mole and J change respectively. In this case, we need to know the conversion factor of mmole to mole and J to kJ.
In the case of a mole:
1 mole --------> 1000 mmole
In the case of Joule:
1 kJ ----------> 1000 J
So the first thing we will do is to change from J to kJ:
87.1 J * 1 kJ / 1000 J = 0.0871 kJ
Now let's convert mmol to mole:
0.0871 kJ/mmole.C * 1000 mmole / 1 mole = 87.1 kJ/mole.C
As you can see, there's is practicly no change at all with the units, so putting all together it would be:
87.1 J/mmole.C * 1000 kJ.mmole / 1000 J.mole = 87.1 kJ/mole.°CHope this helps
The energy stored in an object is called potential energy
True or false
its true
Potential energy is the stored or latent energy in an object at rest. It’s fundamental to many physics-related concepts because its laws hold true on any level, from the planetary to the atomic level. The potential energy of an object is measurable.
Which water usage uses the least amount of water in a year in the United States? a industry
b livestock c irrigation d public water supply
plzzzzzzzz hurrrrry
Please help me thanks so much?!?!?
Answer:
color
Explanation:
Answer:
D
Explanation:
The five conditions of chemical change: color chage, formation of a precipitate, formation of a gas, odor change, temperature change and the others are just physical changes that would happen if you change containers, or let it evaporate.
The octet rule states that atoms in molecules share electrons in such a way that each atom has a full valence shell. Determine whether each structure has the correct number of electrons and obeys the octet rule. Classify structures that have the correct number of electrons and obey the octet rule as valid, and those that do not as invalid. valid structure invalid structure
Answer:
Their must be a picture with this question so we can answer it
Explanation:
According to octet rule the bonded valence shells are completely filled. All the compounds except the first one, CH₃CH₃O is invalid since H does not obey the rule and invalid.
What is octet rule?Octet rule says that an atoms become stable when it completes its valence shell to 8 electrons or 2 electrons for K-shell. Thus bonded shells have to completely filled to be stable.
Each atom shares its electrons based on its valency. For example carbon have a valency of 4 and it forms for bonds and oxygen and sulfur have two and hydrogen forms only one bonds.
In the first compounds CH₃CH₃O, where one H forms two bonds which is not possible and invalid.
In the second compound CONH, all the atoms satisfies its valency including nitrogen having a valency of three forms three bonds. Similarly in CH₂F₂, one fluorine forms one bond and the structure is valid.
In the case of Br₂ , each bromine shares one electron with the other and complete their octet to eight electrons. In NH₃, SCO and COCl₂ all the atoms satisfies their valency and the structures are valid.
Therefore the only invalid structure is first compound, remaining all are valid.
To find more about octet rule, refer the link below:
https://brainly.com/question/11657564
#SPJ2
Your question is incomplete. But most probably your complete question was as in the uploaded image.
Sulfurous acid reacts with barium hydroxide.
Answer:
Ba(OH)2 + H2SO3 = BaSO3 + H2O -
Explanation:
Plz help ASAP i will give brainlists
2AgNO3 + BaCl2 + 2AgCl + Ba(NO3)2
How many grams of silver chloride are produced from 15.0 g of silver nitrate reacting with an excess of barium chloride?
A)9.44 g Agci
B)16.4 g Agci
C)12.7 g Agci
D)0 20.1 g Agci
Use this equation for the next question:
2NaOH + H2SO4 ® Na2SO4 + 2H20
If a reaction produces 0.75 moles Na2SO4, how many moles of NaOH were used?
0.75 moles NaOH
2 moles NaOH
.375 moles NaOH
1.5 moles NaOH
Determine where each type of cleaning solution should be discarded after use. Solvent used to rinse chemicals out of a beaker ______Acid solution used to clean a crucible _________Water used to rinse detergent out of a flask ________
Answer:
Acidic solution used to clean a crucible
Explanation:
This liquid dissolves alcoholic solvents such as crucible, that is why it was selected as the ideal for cleaning.
Although it would be ideal to know in detail which chemical compound is the one you want to clean so that the cleaning technique has better effectiveness.
WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.
The disposal containers in a lab can be used for recycling, disposal of trash, glassware disposal box, sharp box, etc.A waste container is a container usually used to dispose of waste in a laboratory, which may be made of plastic.Moreover, a laboratory sink can be used to wash tools and/or hands without the hazard of damaging the health or the sink.In conclusion, WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.
Learn more in:
https://brainly.com/question/10281181
What is the maximum mass of ammonia (NH3) that can be produced from the synthesis reaction of 781 g of nitrogen and 656 g hydrogen?
HINT: You will need to write a balanced chemical equation and perform 2 calculations before you can determine the answers.
Find the mass in grams of 1.38 moles of Sr
Answer:
116.78 grams.
Explanation:
1 mol of Strontium (Sr) = 87.62 grams
1.38 mol of Strontium = x
Cross Multiply
1 * x = 1.38 * 87.62
x = 116.78 grams
The total thermal energy of a system depends jointly on the temperature, total number of in the system _______________, and the _______________of the material. *
1. Molecules/State
2. Molecules/Heat
3. Matter/Heat
4. Atoms/State
Answer:
Molecules/State
Explanation:
We know from the kinetic molecular theory that matter is made up of molecules. These molecules are in constant motion at various velocities and energies.
The total thermal energy refers to the total kinetic energies of these particles. It depends on the temperature of the system, the energies of the molecules present in the material and the arrangement of the object's molecules (states of matter).
Today, ammonia is synthesized through a series of reactions (called the Haber-Bosch process) that take place between methane, air (which is four parts N2, one part O2), and potassium carbonate:
7 CH4(g) + 8 N2(g) +2 O2(g) + 17 H2O(g) + 7 K2CO3(s) ?? 16 NH3(g) + 14 KHCO3(s)
What is the equilibrium expression for the Harber-Bosch process?
Answer:
K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷
Explanation:
The equation for the reaction is given below:
7CH₄(g) + 8N₂(g) +2O₂(g) + 17H₂O(g) + 7K₂CO₃(s) —> 16NH₃(g) + 14KHCO₃(s)
Equilibrium constant (K) =..?
Equilibrium constant, K for a reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, the equilibrium expression for the Harber-Bosch process for the synthesis of ammonia can be written as shown below:
K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷
helpppp nowww plssss nowww!!
An element has five isotopes. Calculate the atomic mass of this element using the information below. Show all your work. Using the periodic table, identify the element this is likely to be and explain your choice. (18 pts)
A) Isotope 1 – mass: 64 amu; percent abundance: 48.89%
B) Isotope 2 – mass: 66 amu; percent abundance: 27.81%
C) Isotope 3 – mass: 67 amu; percent abundance: 4.11%
D) Isotope 4 – mass: 68 amu; percent abundance: 18.57%
E) Isotope 5 – mass: 70 amu; percent abundance: 0.62%
Answer: Sol:-
Data provided in the question is :-
Atomic mass of isotope -1 = 64 amu
Atomic mass of isotope -2 = 66 amu
Atomic mass of isotope -3 = 67 amu
Atomic mass of isotope -4 = 68 amu
Atomic mass of isotope - 5 = 70 amu
Percentage abundace of isotope - 1 = 48.89 %
Percentage abundance of isotope -2 = 27.81 %
Percentage abundance of isotope - 3 = 4.11%
Percentage abundance of isotope-4 = 18.57%
Percentage abundance of isotope - 5 = 0.62 %
Formula used :-
Average atomic mass of an element =[ {(atomic mass of isotope-1 * percentage abundance of isotope-1) + ( atomic mass of isotope-2 * percentage abundance of isotope -2) + ( atomic mass of isotope -3 * percantege abundance of isotope-3 ) + ( atomic mass of isotope-4 * percentage abundance of isotope-4) + (atomic mass of isotope-5 * percentage abundance of isotope-5)} / 100]
Calculation :-
Put all the value in the formula :-
Average atomic mass of an element = [{(64 * 48.89) + (66 * 27.81) + (67 * 4.11) + (68 * 18.57) + (70 * 0.62)} / 100] amu
= [{(3128.96) + (1835.46) +(257.37) + (1262.76) + (43.4)} / 100] amu
= {(6528.04) / 100} amu
= 65.2804 amu
Average atomic mass of an element is = 65.2804 amu
Then this mass is approximatly equal to atomic mass of zinc so this element would be zinc
atomic mass of zinc = 65.38 \approx 65.2804 amu
What is the charge is the ion when lithium reacts with chlorine
What role do wolves play in the tundra?
Answer:
predator
Explanation:
Wolves, arctic foxes, and snowy owls are predators in the tundra.
Please help with whatever this is and go in number order
If 1.546 g of copper was used by a student at the start of the lab, and 0.732 g of copper were obtained at
the end of the series of reactions, what was the percent recovery? Briefly explain how you found your
answer.
Answer: Percent recovery is 47.34 %
Explanation:
Percent yield is defined as the ratio of experimental yiled to theoretical yield in terms of percentage.
[tex]{\text{ percent yield}}=\frac{\text{amount recovered}}{\text{total amount}}\times 100[/tex]
Putting in the values we get:
[tex]{\text{ percent yield}}=\frac{0.732}{1.546}\times 100=47.34\%[/tex]
Therefore, the percent recovery is 47.34 %
The gas carbon dioxide is a pure substance. Which of the following is true about carbon dioxide? (5 points)
Select one:
a. Carbon and oxygen are chemically bonded in it.
b. Carbon and oxygen retain their original identity in it.
c. It can be separated into carbon and oxygen using physical methods.
d. The proportion of carbon and oxygen is different in different samples of the gas.
Answer:
Carbon and oxygen are chemically bonded in it.
Explanation:
The other answer choices do not apply for compounds, but rather for mixtures instead.
Ammonium phosphate is an important ingredient in many solid fertilizers. it can be made by reacting aqueous phosphoric acid with liquid ammonia. calculate the moles of ammonium phosphate produced by the reaction of 0.085 mol of ammonia. be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
0.028 mole of ammonium phosphate, (NH₄)₃PO₄.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
H₃PO₄ + 3NH₃ —> (NH₄)₃PO₄
From the balanced equation above,
3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.
Finally, we shall determine the number of mole of (NH₄)₃PO₄ produced by the reaction of 0.085 mole of ammonia, NH₃. This can be obtained as follow:
From the balanced equation above,
3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.
Therefore, 0.085 mole of NH₃ will react to produce = (0.085 × 1)/3 = 0.028 mole of (NH₄)₃PO₄.
Thus, 0.028 mole of ammonium phosphate, (NH₄)₃PO₄ were obtained from the reaction.
How many molecules are in 15 moles of CO2?
There are 90.345 x 10^23 molecules in 15 moles of CO2.
What is Avogadro's number?Avogadro's number is the number of units, atoms or molecules in one mole of a substance which is equals to 6.02214076 × 1023. This number is also known as the Avogadro constant.
This means that one mole of a substance is equals to 6.02214076 × 1023 atoms, ions or molecules then 15 moles is equals to 90.345 x 10^23 molecules so we can conclude that there are 90.345 x 10^23 molecules are in 15 moles of CO2.
Learn more about mole here: brainly.com/question/1427235