Your friend will cross the finish line first.
Although you can accelerate faster initially, your friend's higher top speed will ultimately allow them to cross the finish line first. To calculate the time it takes each of you to complete the race, we can use the equation:
time = distance / speedAssuming that both of you start from rest and reach your respective top speeds at the same point in the race, we can calculate the distance each of you covers using the formula:
distance = 1/2 * acceleration * time²For you, the distance covered will be:
distance = 1/2 * 3 m/s² * (10 m/s / 3 m/s²)² = 55.56 mFor your friend, the distance covered will be:
distance = 1/2 * 2 m/s² * (12 m/s / 2 m/s²)² = 72 mTherefore, your friend will cover the 100 m distance first and win the race.
To learn more about speed, here
https://brainly.com/question/17661499
#SPJ4
a 4-kg block being pulled across a table by a horizontal force of 79 n also experiences a frictional force of 10 n. what is the acceleration of the block?the acceleration of the block ism/s2.
The acceleration of the 4-kg block is 17.25 m/s².
What will be the acceleration?Hi, I'd be happy to help you with your question. In order to find the acceleration of the 4-kg block being pulled across a table by a horizontal force of 79 N and experiencing a frictional force of 10 N, we can use the following steps:
1. Determine the net force acting on the block: Net force = Horizontal force - Frictional force
2. Calculate the acceleration using Newton's second law of motion: Net force = mass × acceleration
Step 1: Calculate the net force
Net force = Horizontal force - Frictional force
Net force = 79 N - 10 N
Net force = 69 N
Step 2: Calculate the acceleration
Net force = mass × acceleration
69 N = 4 kg × acceleration
Acceleration = 69 N / 4 kg
Acceleration = 17.25 m/s²
The acceleration of the 4-kg block is 17.25 m/s².
Learn more about acceleration
brainly.com/question/30660316
#SPJ11
if the mediterranean sea is 2520 km at most between europe and africa, and it is closing at a rate of 4.87 cm per year; how many years until the mediterranean no longer exists on the planet?
The time needed for the Mediterranean to no longer exist on the planet is approximately 51,745,380 years. The result is obtained by using the formula for speed.
Speed and TimeTo calculate the number of years until the Mediterranean no longer exists on the planet, we need to use the formula:
Time = Distance/Speed
In this case, the distance is 2,520 km and the speed of closing to each other is 4.87 cm per year. We need to convert the units of distance and speed to be consistent.
Distance = 2,520 km
Distance = 2,520 × 1,000 meters
Distance = 2,520,000 meters
Speed = 4.87 cm per year
Speed = 4.87 ÷ 100 meters per year
Speed = 0.0487 meters per year
Plugging these values into the formula, we get:
Time = 2,520,000/0.0487
Time = 51,745,379.87 years
Time ≈ 51,745,380 years
Hence, it will take approximately 5,178,695 years until the Mediterranean no longer exists on the planet, assuming that the current rate of closure remains constant.
Learn more about speed here:
brainly.com/question/30506212
#SPJ11
a horizontal force of 80 n used to push a chair across a room does 320 j of work. how far does the chair move in this process?
The amount of work done by the force of 80 n is 320 j. Work is calculated by multiplying the force (F) by the distance (d) moved. Therefore, d = 320/80 = 4 m. This means that the chair moved 4 m in the process.
Energy is transformed into work when it takes another form.
In this instance, the chair is being moved across the room by the force of 80 n, which is transmitting its energy to it as labour. In joules (J), this energy is expressed.
As a result, the work produced by the force of 80 n is equivalent to the 320 J of energy that was transmitted. This quantity of energy is equivalent to the 4 m that the chair has travelled.
Complete Question:
A horizontal force of 80 n used to push a chair across a room does 320 j of work. How far does the chair move in this process?
To learn more about work visit:
https://brainly.com/question/25573309
#SPJ4
a force is applied to the end of a 2 m long uniform board weighing 50 n in order to keep it horizontal, while it pushes against a wall at the left. what is the horizontal component of the wall force?
The horizontal component of the wall force is 25 N.
we need to analyze the forces acting on the board. The board is in equilibrium, meaning the net force and net torque are zero. The applied force (F_app) keeps the board horizontal,
while the weight (W) of the board (50 N) acts at its center of mass (1 m from the wall). The wall exerts a force (F_wall) that has both horizontal (F_horizontal) and vertical (F_vertical) components.
We can use the principle of torque balance to solve for the horizontal component of the wall force. Taking the torque about the point where the board contacts the wall:
Torque = Force × Distance
0 = F_app × 2m - W × 1m
F_app = W / 2 = 50 N / 2 = 25 N
As the board is horizontal, the vertical component of the wall force (F_vertical) balances the weight:
F_vertical = W = 50 N
Finally, the board is in equilibrium, so the applied force must be equal to the horizontal component of the wall force:
F_horizontal = F_app = 25 N
To learn more about : force
https://brainly.com/question/12970081
#SPJ11
two coils are placed next to each other flat on the table. the coil on the right is connected in series to a battery and a switch. with the switch closed, there is a clockwise current in the right coil as seen from above. when the switch is opened, the current in the right coil decreases abruptly to zero. what is the direction of the induced current in the coil on the left as seen from above while the current in the right coil decreases?
The direction of induced current in the left coil will be counterclockwise as seen from above.
When the switch is closed, there is a clockwise current in the right coil, which creates a magnetic field that links with the left coil. When the switch is opened, the current in the right coil decreases abruptly to zero, which causes the magnetic field to collapse.
This collapsing magnetic field will induce an electric current in the left coil, according to Faraday's Law of Electromagnetic Induction. The direction of the induced current in the left coil is opposite to the direction of the original current in the right coil,
as the collapsing magnetic field will try to maintain the original current flow. This is because the induced current flows in a direction that opposes the change in magnetic field, which is a fundamental principle of electromagnetism.
To learn more about : direction
https://brainly.com/question/27854247
#SPJ11
what happens to thermal radiation (a continuous spectrum) if you make the source hotter? it produces more energy at all wavelengths. the peak of the spectrum shifts redward. the peak of the spectrum shifts blueward. a and c
When the source of thermal radiation becomes hotter, it produces more energy at all wavelengths and the peak of the spectrum shifts blueward
When the source of thermal radiation becomes hotter, two things happen to the continuous spectrum:
1. It produces more energy at all wavelengths: As the temperature of the source increases, the intensity of the emitted radiation also increases at all wavelengths. This is consistent with the Stefan-Boltzmann Law, which states that the total energy radiated by a black body is proportional to the fourth power of its temperature.
2. The peak of the spectrum shifts blueward: As the temperature of the source increases, the peak wavelength at which the maximum energy is emitted shifts towards shorter wavelengths. This is described by Wien's Displacement Law, which states that the peak wavelength is inversely proportional to the temperature of the source. A shift towards shorter wavelengths means a shift towards the blue end of the visible spectrum.
So, the correct answer is: "a and c."
More on thermal radiation: https://brainly.com/question/30700321
#SPJ11
a sky diver whose mass is 104 kg is falling at a terminal speed of 63 m/s. what is the magnitude of the force of the air on the sky diver?
The magnitude of the force of the air on the skydiver is approximately 1019.24 N.
When a skydiver is falling at terminal velocity, the air resistance (or drag force) acting on the skydiver is equal in magnitude and opposite in direction to the force of gravity acting on the skydiver. Therefore, the net force on the skydiver is zero, and the skydiver falls at a constant speed.
At terminal velocity, the drag force is given by:
Fdrag = mg
where m is the mass of the skydiver and g is the acceleration due to gravity.
Plugging in the given values, we get:
Fdrag = (104 kg) * (9.81 m/[tex]s^2[/tex]) = 1019.24 N
Therefore, the magnitude of the force of the air on the skydiver is approximately 1019.24 N.
Learn more about terminal velocity,
https://brainly.com/question/2654450
#SPJ4
consider a solid sphere of uniform density, total mass m and radius r that is rotating about the axis shown, which lies along its outer edge. what is the moment of inertia about this axis?
Answer:
Ic = 2/5 M R^2 moment of inertia of sphere about center
I = Ic + M R^2 = 7/5 M R^2
Where M R^2 is the inertia added by the parallel axis theorem.
in terms of db , how much louder will the more powerful amplifier be when both are producing sound at their maximum levels?
The increase in decibels (dB) when comparing the more powerful amplifier to the less powerful one will depend on the specific amplifiers being compared. Generally, a doubling of amplifier power will result in a 3dB increase in sound output.
Therefore, if the more powerful amplifier is twice as powerful as the less powerful one, it will produce a 3dB increase in sound output when both are producing sound at their maximum levels. However, if the difference in power between the two amplifiers is greater or less than a factor of two, the increase in dB will be different.
1. Decibels (dB): A logarithmic unit used to express the ratio of two values of a physical quantity, often used to measure sound levels.
2. Amplifier: An electronic device that increases the power of a signal, typically used for audio purposes.
3. Sound Pressure Level (SPL): A measure of the sound pressure of a sound wave relative to a reference value, usually expressed in decibels (dB).
Now, let's go through the steps to compare the loudness of two amplifiers at their maximum levels:
Find the power output (in watts) of both amplifiers at their maximum levels. You'll need this information to proceed with the calculation.
Calculate the difference in decibels (dB) between the two amplifiers using the following formula:
dB difference = 10 * log10(Power Amplifier 1 / Power Amplifier 2)
Where Power Amplifier 1 and Power Amplifier 2 are the power outputs of the two amplifiers in watts.
Interpret the result. A positive dB difference indicates that Amplifier 1 is louder than Amplifier 2, while a negative dB difference indicates that Amplifier 2 is louder. The larger the absolute value of the dB difference, the greater the difference in loudness between the two amplifiers.
More on amplifier: https://brainly.com/question/26252359
#SPJ11
an ensemble forecast is considered robust when the ____.
An ensemble forecast is considered robust when the following conditions are met:
1) The individual members of the ensemble produce similar forecasts.
This means that the different members of the ensemble are in agreement with each other in terms of the predicted weather pattern, temperature, or other relevant meteorological variables.
2) The ensemble mean is a good predictor of the actual outcome.
The ensemble mean is calculated by averaging the forecasts from all the members of the ensemble.
If the ensemble mean is close to the observed value, it suggests that the ensemble forecast is reliable.
4) The ensemble spread is not too large.
The ensemble spread is a measure of the variability of the different members of the ensemble.
If the spread is too large, it indicates that the model is uncertain about the forecast, and the confidence in the forecast is reduced.
However, if the spread is too small, it can indicate that the model is not capturing all the sources of uncertainty, and the forecast may be overly confident.
5) The ensemble has a good track record.
A model that has produced accurate forecasts in the past is more likely to produce reliable forecasts in the future.
Therefore, a robust ensemble forecast is one that has a proven track record of accuracy and reliability.
In summary, an ensemble forecast is considered robust when the individual members of the ensemble produce similar forecasts.
The ensemble mean is a good predictor of the actual outcome, the ensemble spread is not too large, and the ensemble has a good track record of accuracy and reliability.
To know more about ensemble forecast :
https://brainly.com/question/31306837
#SPJ11
a class measured the radius and circumference of various circular objects. the results are plotted on the graph. 1. does there appear to be a proportional relationship between the radius and the circumference? explain or show your reasoining. 2. why might the measured radius and circumfernces not be exactly proportional
It appears that there is a proportional relationship between the radius and circumference of the circular objects. This is because the plotted points form a straight line that passes through the origin.
This indicates that the ratio of the circumference to the radius is constant, which is the definition of proportional relationship. Mathematically, this relationship is expressed as C = 2πr, where C is the circumference, r is the radius, and π is a constant.
However, the measured radius and circumferences may not be exactly proportional due to various factors. One possible reason is measurement errors.
Even small errors in measuring the radius and circumference can affect the calculated ratios and result in slight deviations from the proportional relationship.
Another reason is the shape of the circular objects. If the objects are not perfectly circular or have irregularities in their shape, this can also affect the relationship between the radius and circumference.
Finally, the type of material that the objects are made of can also affect the proportional relationship. For example, the elasticity or stiffness of the material can affect the shape and size of the object, and hence the relationship between the radius and circumference.
To learn more about : radius
https://brainly.com/question/28844366
#SPJ11
what is the absolute pressure at a distance 5.00 m below the surface of a lake? assume the density of the water in the lake is 1000 kg/m3.
The absolute pressure at a depth of 5.00 m below the surface of a lake is 150.3 kPa.The absolute pressure is the sum of the atmospheric pressure and the hydrostatic pressure.
The atmospheric pressure at sea level is 101.3 kPa. The hydrostatic pressure is the pressure due to the weight of the water above the point of measurement.
The hydrostatic pressure can be calculated using the following equation:
P_h = ρgh
where:
P_h is the hydrostatic pressure (in Pa)
ρ is the density of the water (in kg/m³)
g is the acceleration due to gravity (in m/s²)
h is the depth below the surface of the water (in m)
In this case, the density of the water is 1000 kg/m³, the acceleration due to gravity is 9.81 m/s², and the depth is 5.00 m. So, the hydrostatic pressure is:
P_h = 1000 kg/m³ * 9.81 m/s² * 5.00 m
= 4905 Pa
The absolute pressure is then:
P_a = P_atm + P_h
= 101.3 kPa + 4905 Pa
= 150.3 kPa
To know more about pressure:
https://brainly.com/question/10709450
#SPJ12
Where do sound waves travel faster? (1 point)
Responses
A. through denser materials, because the molecules in a tightly packed medium collide more frequently
B. through less dense materials, because the molecules in a loosely packed medium collide less frequently
C. through denser materials, because the molecules in a tightly packed medium collide less frequently
D. through less dense materials, because the molecules in a loosely packed medium collide more frequently
Sound waves travel faster through denser materials, because the molecules in a tightly packed medium collide more frequently (option A)
What are Sound waves?Sound waves are a type of mechanical wave that propagate through a medium, such as air, water, or solids, by causing the molecules of the medium to vibrate back and forth in the direction of the wave's motion.
These vibrations create changes in pressure that move through the medium, ultimately reaching our ears and allowing us to perceive sound. Sound waves can have different properties such as frequency, wavelength, amplitude, and speed, which determine the characteristics of the sound that we hear.
Learn about sound waves here https://brainly.com/question/13105733
#SPJ1
a compact car and a large truck have a head-on collision. during the collision, which vehicle, if either, experiences:the greater force of impact?
During a head-on collision between a compact car and a large truck, both vehicles experience a force of impact.
The question is which vehicle experiences a greater force of impact.
Here is a step-by-step explanation:
1) The force of impact is determined by the mass and velocity of the colliding objects. The greater the mass and velocity of an object, the greater the force of impact.
2) In a head-on collision, both the compact car and the large truck are moving towards each other at a certain velocity, and they have a certain mass.
3) The mass of the large truck is typically greater than the mass of the compact car, due to the larger size and heavier weight of the truck.
4) Since the mass of the truck is greater, it has a greater amount of kinetic energy than the compact car before the collision. This means that the truck is moving at a greater velocity than the car.
5) When the two vehicles collide, the force of impact is proportional to the difference in velocity and mass between the two vehicles.
6) Since the truck has a greater mass and is moving at a greater velocity than the compact car, it will experience a greater force of impact during the collision.
7) However, it's important to note that both the truck and the car experience significant forces during the collision, and the occupants of both vehicles may be injured or killed.
In summary, during a head-on collision between a compact car and a large truck, the truck experiences a greater force of impact due to its larger mass and greater velocity.
However, both vehicles experience significant forces during the collision, and the occupants of both vehicles may be injured or killed.
To know more about collision visit link :
https://brainly.com/question/13138178
#SPJ11
what is the direction of the magnetic field around an electron experiences a force up while moving to the right?
The magnetic field around an electron that is travelling to the right while being exerted a force up is oriented into the page.
The force on the electron travelling in a magnetic field is perpendicular the the direction of the magnetic field as well as the speed of the electron, this can be confirmed by using the right hand thumb rule.
The direction of the magnetic field is into the page if the force on the electron is up and it is moving to the right. This indicates that the magnetic field is oriented against the direction of the electron's travel.
To know more about Right hand thumb rule, visit,
https://brainly.com/question/14434299
#SPJ4
in this case would be into the screen (or out of the screen, depending on the orientation of the observer).The magnetic field around an electron that is travelling to the right while being exerted a force up is oriented into the page.
Explanation - According to the Thumb Rule, also known as the Right-Hand Rule, the direction of the magnetic field around an electron experiencing an upward force while moving to the right can be determined as follows:
Point your right thumb in the direction of the electron's movement (to the right). Then, curl your fingers in the direction of the force experienced by the electron (upward). The direction in which your palm is facing represents the direction of the magnetic field, which in this case, would be into the page or screen.
To know more about electron in magnetic field, click on this -
brainly.com/question/16638636
#SPJ11
a particular star has a surface temperature of 5800 k and its luminosity is 10000 times higher than the sun's luminosity. how does the star's radius compare with the radius of the sun?
The star's radius would be approximately 10 times larger than the radius of the sun.
This is because the luminosity of a star is proportional to its radius raised to the fourth power, and the surface temperature is related to the star's luminosity and radius. Using the Stefan-Boltzmann law, we can calculate that the star's radius is approximately 10 times larger than the sun's radius, assuming both stars have similar compositions. The star's radius is approximately 3.19 times larger than the sun's radius. This means that the star is roughly 10 times larger in volume and 1000 times more luminous (since luminosity is proportional to radius to the fourth power) than the sun.
To know more abut Stefan-Boltzmann law, here
brainly.com/question/30763196
#SPJ4
a baseball pitcher loosens up his pitching arm. he tosses a 0.140-kg ball using only the rotation of his forearm, 0.270 m in length, to accelerate the ball. if the ball starts at rest and is released with a speed of 24.0 m/s in a time of 0.425 s, what torque is applied to the ball while being held by the pitcher's hand to produce the angular acceleration?
Using the moment of inertia and kinematic equations, the torque applied to the ball can be calculated as 2.26 N m, as the pitcher rotates his forearm to toss a 0.140-kg ball with a speed of 24.0 m/s in a time of 0.425 s.
How to find the torque applied to the ball?To calculate the torque applied to the ball by the pitcher's hand, we need to use the equation:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
The moment of inertia for a point mass rotating about a fixed axis is given by:
I = mr²
where m is the mass of the object and r is the distance from the axis of rotation. In this case, the object is a ball with a mass of 0.140 kg, and the distance from the axis of rotation (the pitcher's shoulder) to the center of mass of the ball is 0.270 m. Therefore:
I = (0.140 kg)(0.270 m)²
I = 0.0108 kg m²
The angular acceleration can be calculated using the following kinematic equation:
ω = αt
where ω is the angular velocity, and t is the time. The ball starts from rest and is released with a speed of 24.0 m/s in a time of 0.425 s, so:
ω = 24.0 m/s / 0.270 m
ω = 88.89 rad/s
α = ω / t
α = 88.89 rad/s / 0.425 s
α = 209.4 rad/s²
Finally, we can use the equation τ = Iα to calculate the torque applied by the pitcher's hand:
τ = Iα
τ = (0.0108 kg m²)(209.4 rad/s²)
τ = 2.26 N m
Therefore, the torque applied to the ball while being held by the pitcher's hand to produce the angular acceleration is 2.26 N m.
Learn more about Torque
brainly.com/question/25708791
#SPJ11
what area of the mirror is used to reflect the rays entering one eye from a point on the tip of your nose if your pupil diameter is 4.8
The area of the mirror is used to reflect the rays entering one eye from a point on the tip of your nose if your pupil diameter is 4.8 would be [tex]18.10 mm^2[/tex].
The area of the mirror that is used to reflect the rays entering one eye from a point on the tip of your nose depends on the angle of incidence and the size of the mirror.
If the mirror is small and positioned very close to your face, then the entire surface of the mirror may be used to reflect the rays. However, if the mirror is larger and further away, only a portion of the mirror may be used.
Assuming a typical distance between the eye and the mirror, the area of the mirror that is used to reflect the rays entering one eye from a point on the tip of your nose can be estimated using the formula
[tex]A = \pi r^2,[/tex]
where A is the area of the mirror, and r is the radius of the circle that represents the pupil diameter.
If the pupil diameter is 4.8 mm, then the radius is 2.4 mm.
Using this value, the area of the mirror required to reflect the rays entering one eye from a point on the tip of your nose would be approximate [tex]18.10 mm^2[/tex].
However, this is only an estimate, and the actual area used may be larger or smaller depending on the specific conditions.
For more such answers on mirrors
https://brainly.com/question/31388543
#SPJ11
another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:
The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.
When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:
[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]
Where C1, C2, ..., Cn are the capacitances of the individual capacitors.
Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.
Learn more about circuit's capacitance.
https://brainly.com/question/28884207
#SPJ4
once ejected, how long does it take the electrons with maximum kinetic energy to travel 2.34 cm to a detection device, in seconds? you may assume these electrons travel in a collisionless manner.
It takes approximately 3.95 x 10⁻¹⁰ seconds for the electrons with maximum kinetic energy to travel 2.34 cm to a detection device.
To determine the time it takes for the electrons with maximum kinetic energy to travel 2.34 cm to a detection device, we need to use the equation:
time = distance / velocity
The velocity of the electrons can be calculated using the equation for kinetic energy:
KE = 0.5mv²
where KE is the kinetic energy, m is the mass of the electron, and v is the velocity.
Since we are assuming that the electrons are traveling in a collisionless manner, we can assume that they are traveling at a constant velocity.
Therefore, we can use the maximum kinetic energy of the electrons to calculate their velocity.
The maximum kinetic energy of the electrons is given by:
KE = eV
where e is the charge of an electron and V is the voltage applied to the electron gun.
Assuming a voltage of 10 kV, the maximum kinetic energy of the electrons is:
KE = (1.6 x 10⁻¹⁹ C) x (10,000 V) = 1.6 x 10⁻¹⁵ J
Using this value for KE and the mass of an electron (9.11 x 10⁻³¹ kg), we can calculate the velocity of the electrons:
1.6 x 10⁻¹⁵ J = 0.5 x (9.11 x 10⁻³¹ kg) x v²
v = 5.93 x 10⁷ m/s
Now we can calculate the time it takes for the electrons to travel 2.34 cm:
time = 0.0234 m / 5.93 x 10⁷ m/s = 3.95 x 10⁻¹⁰ s
Learn more about electrons:
https://brainly.com/question/860094
#SPJ11
the first three standing waves patterns for a spring fixed at both ends is shown in the figure. if the frequency of the middle pattern is 72 hz, what is the exact frequency (in hz) of the first (top) pattern? do not include units with the answer.
The exact frequency of the first pattern is 12 Hz.
A standing wave on a spring fixed at both ends can be visualized as a series of oscillations where nodes, or points of no displacement, alternate with antinodes, or points of maximum displacement. The frequency of the standing wave is determined by the speed of the wave, which is dependent on the properties of the medium (in this case, the spring) and the distance between nodes.
The fundamental frequency (first harmonic) is twice the frequency of the second harmonic, which in turn is three times the frequency of the third harmonic. Thus:
f_3 = 72 Hz
f_2 = (1/3) f_3 = 24 Hz
f_1 = (1/2) f_2 = 12 Hz
Therefore, the exact frequency of the first pattern is 12 Hz.
Learn more about frequency
https://brainly.com/question/5102661
#SPJ4
if one-third of this energy goes into heat and other forms of internal energy of the motor, with the rest going to the motor output, how much torque will this engine develop if you run it at 2400 rpm ?
The engine will develop a torque of 475.47 N·m when run at 2400 rpm.
The torque developed by an engine can be calculated using the formula:
Torque = Power / (2π × RPM / 60)
where power is the net power output of the engine and RPM is the speed of the engine in revolutions per minute.
Given that the engine produces 75 kW of power, one-third of which goes into heat and other forms of internal energy, the net power output would be:
Net power = 75 kW × (1 - 1/3) = 50 kW
Converting the engine speed of 2400 rpm to radians per second gives:
ω = 2400 rpm × (2π / 60) = 251.33 rad/s
Substituting the values into the torque formula:
Torque = 50,000 W / (2π × 251.33 / 60) = 475.47 N·m
Learn more about internal energy, https://brainly.com/question/14668303
#SPJ4
a projectile of mass 1.3 kg is launched horizontally from an initial height 2.9 m with an initial velocity 8.5 m/s. this velocity in the x direction is preserved when you ignore air resistance. the projectile still accelerates in the vertical y direction toward the ground, but this is exactly the energy lost from potential energy. energy is conserved as long as you use the total mechanical energy equation. what is the total final kinetic energy (joules) as the projectile just reaches the ground? give your numerical answer to one decimal place precision. assume g
The total final kinetic energy of the projectile as it reaches the ground is 49.5 J (to one decimal place of precision).
Applying conservation of energyTo solve this problem, we need to use the conservation of energy principle. The initial total mechanical energy (potential plus kinetic) of the projectile is converted into its final total mechanical energy when it reaches the ground, assuming no energy is lost due to air resistance.
The initial potential energy is given by:
Ep = mgh = (1.3 kg)(9.81 m/s^2)(2.9 m) = 36.01 J
The initial kinetic energy in the x-direction is given by:
Kx = 0.5mvx^2 = 0.5(1.3 kg)(8.5 m/s)^2 = 49.47 J
Since there is no initial kinetic energy in the y-direction, the total initial mechanical energy is the sum of the initial potential and kinetic energies in the x-direction:
Ei = Ep + Kx = 36.01 J + 49.47 J = 85.48 J
At the final moment, the projectile reaches the ground, so its final potential energy is zero. Therefore, the final total mechanical energy is equal to the final kinetic energy:
Ef = Kf
We know that the projectile is subject to constant acceleration due to gravity (9.81 m/s^2) in the y-direction, and we can use the kinematic equation:
y = yo + voyt + 0.5a*t^2
where y is the final position (0 m), yo is the initial position (2.9 m), voy is the initial velocity in the y-direction (0 m/s), a is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the projectile to reach the ground.
Rearranging this equation to solve for t, we get:
t = sqrt(2(y - yo)/a) = sqrt(2(0 - 2.9)/(-9.81)) = 0.762 s
Now we can use the final velocity in the x-direction and the time of flight to calculate the final kinetic energy in the x-direction:
Kxf = 0.5mvx^2 = 0.5(1.3 kg)(8.5 m/s)^2 = 49.47 J
Therefore, the final total mechanical energy and final kinetic energy are:
Ef = Kf = Kxf = 49.47 J
Therefore, the total final kinetic energy of the projectile as it reaches the ground is 49.5 J (to one decimal place of precision).
Learn more on kinetic energy here https://brainly.com/question/8101588
#SPJ1
a 1 540-kg automobile has a wheel base (the distance between the axles) of 3.10 m. the automobile's center of mass is on the centerline at a point 1.10 m behind the front axle. find the force exerted by the ground on each wheel.
The force exerted by the ground on each wheel of the automobile is 7560.3 N, which is half of the weight of the car.
How to find the force exerted by the ground on each wheel?Since the center of mass is located 1.10 m behind the front axle, the distance between the center of mass and the rear axle is 3.10 m - 1.10 m = 2.00 m.
The weight of the automobile acts vertically downward through its center of mass and is given by:
W = mg
where
m = mass of the automobile
g = acceleration due to gravity = 9.81 m/s^2
Substituting the given values:
W = (1540 kg) * (9.81 m/s^2) = 15120.6 N
Assuming the weight is evenly distributed between the two wheels, the force exerted by each wheel can be found by considering the torque equilibrium of the automobile about the rear axle.
Since the automobile is in static equilibrium, the sum of the torques about any point is zero. Taking the rear axle as the pivot point, the torque due to the weight of the automobile is counteracted by the torques due to the forces exerted by the ground on the two wheels.
Let F1 and F2 be the forces exerted by the ground on the front and rear wheels, respectively. The torques due to these forces can be found using the distance between the wheels and the center of mass:
τ1 = F1 * 1.10 m (clockwise torque)
τ2 = F2 * 2.00 m (counterclockwise torque)
Since the automobile is in torque equilibrium, we have:
τ1 + τ2 = 0
Substituting the values and solving for F1 and F2:
F2 = (τ1/2.00 m) = (W/2) = 7560.3 N
F1 = (τ2/1.10 m) = (W/2) = 7560.3 N
Therefore, the force exerted by the ground on each wheel is 7560.3 N.
Learn more about Center of mass
brainly.com/question/28996108
#SPJ11
the crankshaft in a race car goes from rest to 3600 rpm rpm in 2.8 s.
What is the crankshaft's angular acceleration?
How many revolutions does it make while reaching 3600 rpm?
The angular acceleration of the crankshaft can be found using the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
The initial angular velocity is 0 since the crankshaft starts from rest. The final angular velocity can be found by converting 3600 rpm to radians per second:
final angular velocity = (3600 rpm) x (2π radians/1 revolution) x (1 min/60 s) = 377 radians/s
Plugging in the values, we get:
angular acceleration = (377 radians/s - 0 radians/s) / 2.8 s = 134.6 radians/s^2
Therefore, the angular acceleration of the crankshaft is 134.6 radians/s^2.
To find the number of revolutions the crankshaft makes while reaching 3600 rpm, we can use the formula:
number of revolutions = final angular velocity / (2π radians/1 revolution)
Plugging in the values, we get:
number of revolutions = 377 radians/s / (2π radians/1 revolution) = 59.9 revolutions
Therefore, the crankshaft makes approximately 59.9 revolutions while reaching 3600 rpm.
To know more about angular acceleration :
https://brainly.com/question/30787003
#SPJ11
when a time series contains no trend, it is said to be group of answer choices filtered. nonstationary. stationary. nonseasonal. seasonal.
When a time series contains no trend, it is said to be c. stationary.
A stationary time series is characterized by a constant mean, constant variance, and no predictable pattern or trend over time. This means that the statistical properties of the series remain constant, allowing for more accurate predictions and modeling. Stationary time series are easier to analyze because their properties remain stable over time, unlike nonstationary time series, which exhibit trends, seasonality, or other changing patterns.
Nonseasonal and seasonal time series can both be stationary or nonstationary, depending on whether they exhibit a trend or not. In summary, a time series without a trend is referred to as stationary, which makes it more predictable and easier to analyze compared to nonstationary time series. When a time series contains no trend, it is said to be c. stationary.
Learn more about stationary at:
https://brainly.com/question/30396329
#SPJ11
waves on a particular string travel with a velocity of 10 m/s. a high-speed photograph shows that successive peaks are 0.50 m apart along the string. the frequency of the waves is:
The frequency of the waves on the string is 20 Hz.
The velocity of waves on a string is given by the equation:
v = λf
where v is the velocity of the wave, λ is the wavelength, and f is the frequency of the wave.
We are given that the velocity of waves on the string is 10 m/s and that successive peaks (or troughs) are 0.50 m apart. This distance is equal to the wavelength (λ) of the wave. Therefore, we can write:
λ = 0.50 m
Substituting this value and the given velocity into the equation above, we get:
10 m/s = (0.50 m) f
Solving for f, we get:
f = 10 m/s / 0.50 m = 20 Hz
To know more about Velocity:
https://brainly.com/question/30559316
#SPJ4
In one to two sentences decsribe characteristics of a high air pressure system
Please help!
a race car driver is driving his car at a constant speed of 53.5 m/s on a circular track with a radius of 200 m. what are the magnitude (in m/s2) and direction of the car's acceleration?
The magnitude of the car's acceleration is 14.31 m/s². The direction of the car's acceleration is towards the center of the circular track.
To find the magnitude and direction of the car's acceleration, we'll use the centripetal acceleration formula and the fact that it acts toward the center of the circle.
1. Calculate centripetal acceleration:
Centripetal acceleration (a_c) = v² / r
Where v is the constant speed (53.5 m/s) and r is the radius of the circular track (200 m).
2. Plug in the values:
a_c = (53.5 m/s)² / 200 m
3. Solve for a_c:
a_c = 2862.25 m²/s² / 200 m
a_c = 14.31 m/s²
The magnitude of the car's acceleration is 14.31 m/s².
As for the direction of the acceleration, centripetal acceleration always acts towards the center of the circular path. So, in this case, the direction of the car's acceleration is towards the center of the circular track.
In summary, the magnitude of the car's acceleration is 14.31 m/s², and the direction is towards the center of the circular track.
More on acceleration: https://brainly.com/question/30464356
#SPJ11
a person pushes on a rolling cart with a force that diminishes with time because the person must walk faster to keep up with the accelerating cart. how much work does the person generate while pushing on the cart?
The exact amount of work done would depend on the specific values of force, distance, and time involved
The work done by the person while pushing on the rolling cart depends on the force applied and the distance over which it is applied. However, in this scenario, the force applied by the person diminishes with time as the cart accelerates.
This means that the work done by the person would also diminish with time. As the person must walk faster to keep up with the accelerating cart, the distance over which the force is applied also increases.
The total work done by the person can be calculated by integrating the force applied over the distance covered. Since the force diminishes with time, the work done would be less than if the force were constant.
To learn more about : work
https://brainly.com/question/8119756
#SPJ11