A disk-shaped merry-go-round of radius 3.03 mand mass 145 kg rotates freely with an angular speed of 0.681 rev/s . A 65.4 kg person running tangential to the rim of the merry-go-round at 3.41 m/s jumps onto its rim and holds on. Before jumping on the merry-go-round, the person was moving in the same direction as the merry-go-round's rim. What is the final angular speed of the merry-go-round?

Answer:

V = 268.8 m/s

Explanation:

The speed of a wave in general is given by the following formula:

V = fλ

where,

V = Speed of that wave

f = Frequency of the wave

λ = wavelength of the wave

In this case we have a sound wave, travelling across carbon dioxide. The properties of sound wave are as follows:

V = Speed of Sound in Carbon dioxide = ?

f = frequency of sound wave = 140 Hz

λ = wavelength of sound wave = 1.92 m

Therefore,

V = (140 Hz)(1.92 m)

V = 268.8 m/s

Answer:

Because ocean tides are the effect of ocean water responding to a gravitational gradient, the moon plays a larger role in creating tides than does the sun. But the sun's gravitational gradient across the earth is significant and it does contribute to tides as well.

i hope this help i

i try to explain and like i sayed i hope this help u.

Answer:

the moon

Explanation:

ive passed the grade you learned this in

Answer:

a)4500V

b)750V

Explanation:

Given:

Distance between the plate=

6.00 cm

We need to convert to m

Then the Distance between the plate=

0.06m

electric field strength between two parallel plates =

7.50 × 104 V/m .

Then E= 7.50 × 104 V/m .

(a) What is the potential difference between the plates?

potential difference between the plates can be calculated using the formula below

Δ Vab=ED

Where E is the given electric field strength

D= The Distance between the plate

ΔVab=7.50 × 10⁴V/m ×

0.06m

= 4500V

(b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?

the potential 1cm from the zero volt plate

Then the 1cm must be converted to m

= 0.01m

Let us say plate A as the plate at 0 volts:

The potential increases linearly going from plate A (0 V) to plate B (4500V).

Therefore,if the potential difference between A and B, separated by 6 cm, is 4500 V, then the potential difference between A and a point located at 1 cm from A is can be calculated also

If the plate with Lowest potential is taken to be zero then

=ΔVab=Vab-Vb=Va-0=Va=ED

Va=7.50 × 10⁴V/m × 0.01=750V

Answer:

20 m

Explanation:

Given:

v = 0 m/s

a = -10 m/s²

t = 4 s / 2 = 2 s

Find: Δy

Δy = vt − ½ at²

Δy = (0 m/s) (2 s) − ½ (-10 m/s²) (2 s)²

Δy = 20 m

Answer:

3.5 kg

Explanation:

use the equation; (m1v1i) + (m2v2i) = (m1v1f) + (m2v2f)

= m1(0) - m1v1f = m2v2f - m2(0)

= (-2.0)(15)/-20

= 1.5 kg

then add the other piece (2.0kg)

1.5 + 2.0 = 3.5 kg

The mass of firework before explosion is 3.50kg.

mass flying to right  m1 = 2kg

                                v1  = 15 m/s

mass flying to left m2  = ?

                                v2 = - 20m/s

 initial velocity u = 0

by conservation of linear momentum

m1v1+ m2v2 = (m1+m2 ) u

2x 15- m2x 20 = 0

                 m2 = 1.50kg

therefore mass of firework before explosion

                   m1+m2

                     2+ 1.50

                  = 3.50kg

Mass is the amount of matter in a physical body. It  also measures the body's inertia, the resistance to acceleration when a net force is applied. The mass of an object also determines  its gravitational force on other objects. The basic SI  unit of mass is the kilogram.

Body mass is always constant. One way to calculate mass:

mass = volume × density. Weight is a measure of the gravitational force acting on a mass. The SI unit of mass is the "kilogram".

To learn more about mass, refer;

https://brainly.com/question/19694949

#SPJ2

Answer:

[tex]\boxed{\mathrm{Density = 1.1 \ g/cm^3}}[/tex]

Explanation:

Volume of fresh water:

Volume = Mass / Density

Volume = 1600/1

[tex]V_{1}[/tex] = 1600 cm³

Volume of sea water:

Volume = Mass / Density

Volume = 1200/1.2

Volume = 1000 cm³

So,

Total Volume when they are mixed = 1600+1000

Total Volume when they are mixed = 2600 cm³

And,

Total Mass when they are mixed = 1600+1200

Total Mass when they are mixed = 2800 g

Now, Measuring the density of the mixture:

Density = Mass / Volume

Density = 2800/2600

Density = 1.1 g/cm³

Answer:

[tex]\mathrm{1.086 \: g/cm^3 }[/tex]

Explanation:

Volume of fresh water ⇒ 1600 cm³

Density of fresh water ⇒ 1 g/cm³

Volume of sea water ⇒ 1200 cm³

Density of sea water ⇒ 1.2 g/cm³

[tex]density=\frac{mass}{volume}[/tex]

[tex]mass=density \times volume[/tex]

Calculate mass of fresh water.

[tex]m=1600 \times 1[/tex]

[tex]m=1600 \: g[/tex]

Calculate the mass of sea water.

[tex]m=1200 \times 1.2[/tex]

[tex]m=1440 \: g[/tex]

Find the density of the mixture.

[tex]density=\frac{mass}{volume}[/tex]

[tex]\rho = \frac{1600+1440}{1600 + 1200}[/tex]

[tex]\rho = \frac{3040}{2800}[/tex]

[tex]\rho= 1.0857...[/tex]

Answer:

3.94

Explanation:

divide total mass by the number of blocks since they are identical

Answer:

3.94

Explanation:

You want to find the mass of one block. Since we know there is 8 blocks with the same mass, you can divide the total mass by 8 since the mass is equally distributed within the 8 blocks

Answer:

Explanation:

Given,

Force ( f ) = 30 N

Acceleration(a) = 7.6 m/s

Now, Let's find the mass of the ball

Using the Newton's second law of motion:

We get:

[tex]force \: = mass \: \times acceleration[/tex]

plug the value

[tex]30 \: = m \: \times 7.6[/tex]

Use the commutative property to reorder the terms

[tex] 30 = 7.6 \: m[/tex]

Swap the sides of the equation

[tex]7.6m = 30[/tex]

Divide both sides of the equation by 7.6

[tex] \frac{7.6 \: m}{7.6} = \frac{30}{7.6} [/tex]

Calculate

[tex]m = 3.94 \: kg[/tex]

Hope this helps..

Best regards!!

Answer:

[tex]\displaystyle \boxed{\mathrm{3.95 \: kg }}[/tex]

Explanation:

[tex]\mathrm{force \: (N) = mass \: (kg) \times acceleration \: (m/s^2)}[/tex]

[tex]\mathrm{force = 30N}[/tex]

[tex]\mathrm{acceleration = 7.6 \: m/s^2 }[/tex]

[tex]\mathrm{Find \: the \: mass.}[/tex]

[tex]\mathrm{30 = m \times 7.6}[/tex]

[tex]\displaystyle \mathrm{m =\frac{30}{7.6} }[/tex]

[tex]\displaystyle \mathrm{m = 3.947... }[/tex]

Answer:

D. Displacement

Explanation:

got it right on edge

Average velocity is different than average speed because calculating average velocity involves Displacement, therefore the correct option is option D.

The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.  It can also be represented by the infinitesimal rate of change of displacement with respect to time. The unit of velocity is meter/second.

The mathematical expression for velocity is given by

velocity= displacement  / time taken

In the displacement time graph the slope of the curve represent the velocity of the object ,the rate of change of velocity is known as the acceleration of the object .

In the velocity time graph the slope of the curve represent the acceleration of the body, The unit of acceleration is metre per second Square

The total distance traveled by an object is different than the total displacement covered by it because the displacement is a vector quantity and it is calculated on the basis of the shortest distance traveled by the body or object.

The main difference between the distance and the displacement is that displacement can be positive or negative or zero but distance can never be negative.

Let’s understand understand with example of average velocity ,suppose an object is moving with 200 m displacement covered in a time of 15 seconds then the average velocity of the object is 13.33 m/s.

Thus, average velocity is different than average speed because calculating average velocity involves Displacement, therefore the correct option is option D.

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ6

Answer:

the answer B

Explanation:

Answer:

B. 122N

Explanation:

f = 0.15 x 83 x 9.8 = 122.01

f = 122N

Answer:

8996kg*m/s/s

Explanation:

Given:

a=26m/s/s

m=346kg

Required:

f=?

Formula:

f=m*a

Solution:

f=346kg*26m/s/s

f=8996kg*m/s/s

Hope this helps ;) ❤❤❤

Answer:

[tex]\boxed{F = 8996 \ Newton}[/tex]

Explanation:

Given:

Mass = m = 346 kg

Acceleration = a = 26 m/s²

Required:

Force = F = ?

Formula:

F = ma

Solution:

F = 346 * 26

F = 8996 Newton

I think any pendulum would swing slower on the moon than it would on Earth.

The time it takes a pendulum to go through a complete back and forth swing is:

Time period = 2 π √(length/gravity)

You can see that 'gravity' is in the denominator of the fraction, so the smaller gravity gets, the longer the period gets.

To be a little bit more technical, the period is inversely proportional to the square root of gravity.

So the period for a complete swing on the moon would be  √(9.8/1.6) times as long as the complete swing of the same pendulum on Earth.

That number is roughly 2.47 .

So, for every 1 second that a pendulum takes to swing back and forth once on Earth, the same pendulum would take 2.47 seconds to do it on the moon.

Answer:

based on my opinion....

as we know that gravity in moon are less than gravity in earth.. since the force of gravity is less on the moon, the pendulum would swing slower at the same length, angle

and the frequency would be less.

I hope this helps

Answer:

1) a    α,  m   I,  W=F.d    W =τ . θ,

2)  a = v²/r

Explanation:

1) The amounts of rotational and translational motion are related

acceleration is

        a = d²x / dt²

    linear displacement is equivalent to angular rotation, therefore angular acceleration is

      α = d²θ / dt²

force in linear motion is equivalent to moment in endowment motion

       F = m a

       τ = I α

the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia

          I = m r²

Work is defined by W = F. d

in rotation it is defined by W = τ . θ

The linear momentum is p = mv

the angular momentum L = I w

momentum the linear motion is I = F dt

in the rotation it is I = τ dt

2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).

      [tex]a_{c}[/tex]Ac = v²/r

Answer:

a) tangent ; b) 153.88 yds ; c) No , less than or equal to 45° ; D) 45°

Explanation:

Given the following ;

From the triangle sketch :

Base length = 50 yards

Angle of elevation = 72°

a. Which trigonometric ratio would you use to calculate how high the blimp will be above the 50 yard line?

Using trigonometry :

The height of the blimp will be calculated using :

Tangent :

Tan θ = opposite / Adjacent

B.) How high above the ground is the blimp?

Using :

Tan θ = opposite / Adjacent

Θ = 72° ; adjacent = 52, opposite = height(h)

Tan 72° = h / 50

h = 3.0776835 * 50

h = 153.88 yds

C.) In order to be able to read the advertisement on the side of the blimp the highest the blimp can be is 150 feet. Will the fans be able to read the advertisement?

1 yard = 3 Feets

153.88 yards = 3 * 153.88

= 461.65 feets

No, because the height of the blimp is 461.65 Feets which is greater than 150 Feets.

To make viewing possible, the angle of elevation should be:

50 yards is equivalent to (3 * 50) = 150 feets

Max imum Height of blimp = 150 Feets

From pythagoras ;

Tanθ = 150 Feets / 150 Feets

Tanθ = 1

θ = tan^-1(1)

θ = 45°

To make viewing advertisement possible, angle of elevation should not exceed 45°

d.)If height of blimp is 150 Feets, then the exact angle of elevation will be 45°

Answer:

0.12 kW

Explanation:

Given that

The flow rate of air (V)=0.3 ft³/s

V=0.008 m³/s

Pressure, P=14.7 psia

P=1.013529 atm=101.325  kPa

Inlet temperature = 70° F=294.261 K

Exit temperature = 83° F=301.483 K

We know that , specific heat capacity of the air

Cp=1.005 kJ/kg.K

The mass flow rate of air is given as

[tex]\dot{m}=\dfrac{P\times V}{R\times T}\\\dot{m}=\dfrac{101.325\times 0.008}{0.287\times 294.261}\\\dot{m}= 0.0095\ kg/s[/tex]

By using energy conservation

[tex]Electric\ power =\dot{m}\times C_p\times (T_2-T_1)\\Electric\ power =0.0095\times 1.005\times (83-70)=0.12\ kW[/tex]

Therefore electric power dissipate by components will be 0.12 kW.

Answer: 43.2 J

Explanation:

Work = change in KE

initial KE = 0

final KE = 1/2mv^2 = 1/2(0.370 kg)(15.2778 m/s)^2 = 43.2 J

i'm not sure about sig figs though

ANSWER

C 11.5 m/s

EXPLANATION

Answer:

11.5m/s south

Explanation:

Online classes

Answer:

Explanation:

For entropy change the formula is

ΔS = ΔQ / T

ΔQ = Δ H

ΔS = Δ H / T

Given

Δ H = + 162.8 kJ

We can take equilibrium temperature as average temperature of the whole process

So, T = 273 + 87 = 360 K

ΔS = Δ H / T

=  162.8 kJ  / 360

= +  0.508 kJ / K .

When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K

For The entropy change, the formula is

Then ΔS = ΔQ / T

After that ΔQ = Δ H

Then ΔS = Δ H / T

Given as per question are:

Then Δ H = + 162.8 kJ

Now We can take equilibrium temperature as average temperature of the whole process are:

So, T is = 273 + 87 = 360 K

Then ΔS = Δ H / T

After that = 162.8 kJ / 360

Therefore, = + 0.508 kJ / K.

Find more information about Entropy change here:

https://brainly.com/question/17241209

Answer:

tension is how much force is being exerted on each end of the string, whereas length is how long the string is. So assuming that the string has finite mass, then the tension on the string should increase proportionally to the string according to Newton's law f=ma.

Explanation:

Answer:

C: You must know force and distance to calculate both.

Explanation:

A force is said to have done work, when it has succeeded in causing displacement in an object from its starting point.

Power can be defined as the rate of doing work.

The work can be calculated using the following formula:

Work done = Force × Displacement

The power can be calculated using the following formula:

Power = Work \ Time

In order to calculate the work and power, the force and distance should be known. The force and distance will help in the calculating the work, which will in turn help in the calculation of the power of the object.

Hence, the answer is you must know force and distance to calculate both.

Answer:

A. 119kg

B.0.53m from head

Explanation:

A. Weight = 730+340.

=1170N

F= Wg

W = 1170/9.8

= 119kg

If x is distance from head to CG then 1.92–x is the other distance.

Moments must equal

470x = 330(1.89–x)

470x = 623.7 – 330x

1170x = 623.7

x = 0.53m from head

Answer:

Hydrogen used in fuel cells has the energy to weight ratio ten times greater than lithium-ion batteries. Consequently, it offers much greater range while being lighter and occupying smaller volumes. It can also be recharged in a few minutes, similarly to gasoline vehicles.

Answer:

The total frictional force equals 60 N

Explanation:

We know that F - f = ma where F is the applied force, f is the frictional force, m the mass of the object and a its acceleration.

Now, since the cart moves with constant velocity, its acceleration is zero. So, a = 0.

So F - f = ma

F - f = m(0) = 0

F - f = 0

So, F = f

From the above, we see that the frictional force equals the applied force which is equal to 60 N.

So, f the total frictional force equals 60 N

Answer:

False

Explanation:

Total internal reflection is a condition that occurs when light travels from dense medium to less dense medium.

From the table given in the question above,

Refractive Index of Whale oil = 1.460

Refractive Index of vacuum = 1

From the above, we can see that the whale oil has a higher Refractive Index than vacuum. This implies that the whale oil is denser than the vacuum.

Therefore, total internal reflection will occur when light travels from whale oil to vacuum because the whale oil is denser than the vacuum.

Explanation:

let us use the explanation below to get the intuition so desired;

According to Faraday's law of electro magnetic induction, when ever a coil/conductor is made to rotate in a magnetic field, voltage or emf is created and current is produced, in the long run energy has be produced or converted.

The conversion of this energy is made possible by the motion of the coil/conductor is the magnetic field, just by the  motion of the conductor cutting through the magnetic field, thus creating electro motive force(E.M.F) hence producing current, and ultimately energy is created

Answer:

        v = √k/m    x

Explanation:

We can solve this exercise using the energy conservation relationships

starting point. Fully compressed spring

        Em₀ = [tex]K_{e}[/tex] = ½ k x²

final point. Cart after leaving the spring

        [tex]Em_{f}[/tex] = K = ½ m v²

        Em₀ = Em_{f}

        ½ k x² = ½ m v²

        v = √k/m    x

Explanation:

momentum = mass x velocity

initial momentum = 100 x 15 = 1500kgm/s

after momentum = 100 x 20 = 2000kgm/s

a =(v-u)/t

a = (20-15)/10

a = 5/10

a = 0.5m/s²

f = ma

f = 100 x 0.5

f = 50N

Answer:

Package's vertical displacement(s) = 22.12 meter

Explanation:

Given:

Speed of plane = 120 m/s

Total distance = 255 m

Find:

Package's vertical displacement(s)

Computation:

Time taken = Distance / Speed

Time taken = Total distance / Speed of plane

Time taken = 255 / 120

Time taken = 2.125 s

Acceleration due to gravity(g) = 9.8 m/s²

Initial velocity (u) = 0

So,

Package's vertical displacement(s) = ut + (1/2)gt²

Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²

Package's vertical displacement(s) = 22.12 meter

Answer: -22.1

Explanation:

I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))

Answer:

pressure=force/area