a longitudinal wave is passing through the newly discovered element belmontium at 380 m/s when it encounters another longitudinal wave coming from the other direction. how fast is the other wave moving? express your answer with the appropriate mks units.

When electrical power is eliminated, fires that were initially caused by an electrical fault may change classification depending on the materials and substances involved in the fire.

Class A fires involve ordinary combustibles such as wood, paper, cloth, and plastics. If an electrical fire involves any of these materials, it will become a Class A fire and can be extinguished using water or an appropriate Class A fire extinguisher.

Class B fires involve flammable liquids and gases such as gasoline, oil, and propane. If an electrical fire involves any of these materials, it will become a Class B fire and can be extinguished using a Class B fire extinguisher, such as a dry chemical extinguisher or a carbon dioxide extinguisher.

It's important to note that extinguishing an electrical fire with water can be dangerous as water conducts electricity and can cause electrocution. Therefore, it's important to first cut off the power source before attempting to extinguish an electrical fire.

Learn more about electrical power

https://brainly.com/question/27442707

#SPJ4

The energy comes from gravity, potential energy, and rotational kinetic energy to move the athletes through the half pipe.

The energy that moved the athletes through the half-pipe came from various sources. Firstly, the athletes themselves possess energy due to their physical abilities, which they utilized to perform their tricks and moves. This energy is known as kinetic energy, which is the energy of motion. The athletes gained potential energy by starting at a higher point on the half-pipe and then using gravity to propel themselves down the slope.

When the athletes were at the top of the half-pipe, they had stored potential energy which was converted into kinetic energy as they began to move down the slope. The athletes also used the energy generated by their movements and rotations to perform their tricks. This energy is known as rotational kinetic energy and is produced by spinning or rotating objects. Overall, the energy used to move the athletes through the half-pipe was a combination of their physical abilities, gravity, potential energy, and rotational kinetic energy.

know more about rotational kinetic energy here:

https://brainly.com/question/30459585

#SPJ11

The circled vector on the diagram below represents the tension on the rope.

The option C is correct

Tension is described as  the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.

T = mg + ma

We know that the force of tension is calculated using the formula T = mg + ma.

In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.

Learn more about tension at: https://brainly.com/question/24994188

#SPJ1

The amount of energy that must be removed from 0.811 kg of water to cool it from 91°C to 15°C is approximately 61.636 kcal.

To calculate the change in energy for this process, we will use the specific heat capacity of water and the equation:

[tex]Q = m . c .[/tex]ΔT

where:
Q = change in energy (in kcal).
m = mass of water (in kg).
c = specific heat capacity of water (in kcal/kg°C).
ΔT = change in temperature (in °C).

The specific heat capacity of water is approximately 1 kcal/kg°C.

Therefore, 61.636 kcal of energy must be removed from 0.811 kg of water to cool it from 91°C to 15°C.

Learn more about the amount of energy that must be absorbed or lost to raise or lower the temperature, at: https://brainly.com/question/29418076

#SPJ11

To calculate the power, in diopters, of eyeglasses that will correct vision when held 1.50 cm from the eyes, you need to know the individual's refractive error in diopters.

Refractive error refers to the degree of near sightedness (myopia), farsightedness (hyperopia), or astigmatism that an individual has. This value is typically measured by an optometrist or ophthalmologist using a phoropter.

Once the refractive error is known, the power of the corrective eyeglasses can be determined by dividing the refractive error by the distance (in meters) between the glasses and the eyes. In this case, since the glasses are held 1.50 cm from the eyes, the distance in meters would be 0.015 meters.

For example, if the individual has a refractive error of -2.00 diopters, the power of the corrective eyeglasses when held 1.50 cm from the eyes would be -2.00 / 0.015 = -133.33 diopters.

To know more about Refractive error:

https://brainly.com/question/30162760

#SPJ11

The total force exerted by the strings on the neck is 3061 N

We must determine the tension in each string and add it together to determine the overall force the strings are applying on the neck.

The wave speed equation may be used to determine the tension in a string:

v = fλ

where v is the speed of the wave (which is the same as the speed of the string), f is the frequency of the note, and λ is the wavelength of the wave (which is twice the length of the string).

For the g and d strings:

λ = 2(0.865 m) = 1.73 m

v = fλ

v_g = (98 Hz)(1.73 m) = 169.5 m/s

v_d = (73.4 Hz)(1.73 m) = 127.0 m/s

The tension in each string can be found using the wave equation:

T = [tex]μv^2/λ[/tex]

where T is the tension in the string, μ is the linear mass density of the string (mass per unit length), and v and λ are the speed and wavelength of the wave on the string.

For the g and d strings:

[tex]T_g = (5.8 g/m)(169.5 m/s)^2/1.73 m = 320 N[/tex]

[tex]T_d = (5.8 g/m)(127.0 m/s)^2/1.73 m = 196 N[/tex]

For the a and e strings

λ = 2(0.865 m) = 1.73 mv = fλ

v_a = (55 Hz)(1.73 m) = 95.2 m/sv_e = (41.2 Hz)(1.73 m) = 71.2 m/s

[tex]T_a = (26.8 g/m)(95.2 m/s)^2/1.73 m = 1643 N[/tex]

[tex]T_e = (26.8 g/m)(71.2 m/s)^2/1.73 m = 902 N[/tex]

The total force exerted by the strings on the neck is:

F_total = T_g + T_d + T_a + T_e

F_total = 320 N + 196 N + 1643 N + 902 N

F_total = 3061 N

Learn more about total force

https://brainly.com/question/30149537

#SPJ4

False. Here is a step-by-step explanation:

1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.

2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.

3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.

4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.

5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.

6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.

7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.

8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.

9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.

10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.

To know more about Modern geologists :

https://brainly.com/question/28274168

#SPJ11

The type of bar optic you are describing is commonly known as a "free flow pourer" or "free pour spout."

These types of pourers do not have a specific amount they dispense but instead rely on the bartender's skill to regulate the flow of liquid by applying and releasing pressure on the bottle. The flow of liquid stops when pressure is released, allowing for precise and controlled pouring.

Free flow pourers are commonly used in bars and restaurants to pour spirits, mixers, and other liquids into cocktails and drinks. They can come in a variety of sizes and materials, including plastic, metal, and silicone, and are easily replaceable when worn or damaged.

Learn more about bar optic

https://brainly.com/question/30694096

#SPJ4

The moment of inertia of an object is a measure of its resistance to rotational motion. It depends on the distribution of mass and the distance of the mass from the axis of rotation.

When comparing a hoop and a disk with the same mass and radius, we can see that the hoop has all its mass concentrated at the outer edge, while the disk has its mass distributed throughout its volume. This means that the hoop has more of its mass located at a greater distance from the axis of rotation, making it harder to rotate. Therefore, the moment of inertia of the hoop is greater than that of the disk.

Similarly, when comparing a spherical shell and a solid sphere with the same mass and radius, the spherical shell has all its mass located on the outer surface, while the solid sphere has its mass distributed throughout its volume. This means that the spherical shell has more of its mass located at a greater distance from the axis of rotation, making it harder to rotate. Therefore, the moment of inertia of the spherical shell is greater than that of the solid sphere.

In both cases, we can see that the more mass that is located farther away from the axis of rotation, the greater the moment of inertia. This is because the mass farther from the axis of rotation has a greater leverage and thus requires more force to rotate.

Know more about rotational motion here:

https://brainly.com/question/30459585

#SPJ11      

Contact pressure occurs due to the contact between two distinctive objects. Non-contact pressure happens due to either appeal or repulsion between two objects such that there is no contact between these objects. There is no area linked with the contact force.

A non-contact pressure is any force applied to an object via another body without any contact. For example, magnetic force, gravitational pressure and electrostatic force.

Force utilized through direct touching an object is called contact force. Like me pushing a wall i.e. muscular pressure or frictional pressure etc.

A force that can purpose or change the movement of an object by means of touching it is referred to as Contact Force. For example, muscular force,frictional force,spring force,tension force,air resistance pressure etc.

Learn more about non-contact force here:

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

The distribution of cones at the point of image formation is crucial in resolving two point sources

To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.

In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.

The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .

To learn more about : distribution

https://brainly.com/question/28027633

#SPJ11

The period between maximum sunspot numbers is roughly half the length of the full solar cycle.

To understand the difference between the period between maximum sunspot numbers and the period of the full solar cycle. The period between maximum sunspot numbers refers to the time it takes for sunspot activity to reach its peak levels, and then decrease back to minimum levels. This period is approximately 11 years.

The full solar cycle, on the other hand, is the time it takes for the sun's magnetic field to complete a full cycle, which includes both increasing and decreasing sunspot activity. This period is approximately 22 years.

In summary, the period between maximum sunspot numbers focuses on the time it takes for sunspot activity to reach its peak and then decrease, while the full solar cycle considers the entire process of the sun's magnetic field cycle. The period between maximum sunspot numbers is roughly half the length of the full solar cycle.

More on sunspot: https://brainly.com/question/29125391

#SPJ11

A steam engine ( Carnot engine ) has an efficiency of 73%. If the waste heat has a temperature of 24◦C, the temperature of the boiler is 827.41°C.

Both 121°C (250°F) and 132°C (270°F) are commonly used steam sterilising temperatures. For a short period of time, these temperatures (and other high temperatures) must be held in order to destroy microbes.

efficiency = 1 - (Temp_cold / Temp_hot)

Temp_cold = 24°C + 273.15 = 297.15 K

efficiency of 73%.=  .73

Tem_hot = T_cold / (1 - efficiency)= 297.15 K / (1 - 0.73)

Tem_hot = 1100.56 K

Finally, by deducting 273.15, we may change the temperature of the hot reservoir back to Celsius:

Tem_hot = 1100.56 K - 273.15 = 827.41°C

hence, he temperature of the boiler is 827.41°C.

To know more about temperature of the boiler visit:-

https://brainly.com/question/14285341

#SPJ1

To determine the minimum and maximum positions of the particle, we need to know more information about the system. However, we can use the principle of conservation of energy to make some observations.

Since the total mechanical energy of the particle is negative, we know that the particle must be in a state of potential energy greater than its kinetic energy. This means that the particle could be at the top of a hill, for example, where it has a large potential energy but a small kinetic energy. Alternatively, the particle could be in a region of space where there is a large attractive force acting on it, such as a gravitational or electric field, which could also contribute to a negative total mechanical energy. Without more information, it is not possible to determine the exact minimum and maximum positions of the particle. Conservation of energy is a fundamental law of physics stating that energy cannot be created or destroyed, only transformed from one form to another or transferred from one object to another.

Learn more about conservation of energy here:

https://brainly.com/question/11573747

#SPJ11

Assuming that the particle is subject to conservative forces, the total mechanical energy E of the particle is the sum of its kinetic energy and potential energy. Mathematically,

E = K + U

where K is the kinetic energy of the particle, and U is its potential energy.

Since the total mechanical energy E of the particle is given as -8 J, we have:

E = -8 J

Let's assume that the potential energy U has a minimum value of Umin and a maximum value of Umax.

Then we can write:

E = K + Umin (at the minimum position)

E = K + Umax (at the maximum position)

Subtracting the first equation from the second equation, we get:

E = (K + Umax) - (K + Umin)

E = Umax - Umin

Substituting the value of E, we get:

-8 J = Umax - Umin

This means that the difference between the maximum potential energy and the minimum potential energy is 8 J.

Since potential energy is a relative quantity, we can choose any point as a reference and assign it a potential energy of zero.

Let's assume that the minimum potential energy occurs at this reference point.

Then we can say:

Umin = 0 J

Umax = 8 J

Substituting these values in the equations for E, we get:

-8 J = K + 0 J (at the minimum position)

-8 J = K + 8 J (at the maximum position)

Solving for K, we get:

K = -8 J (at the minimum position)

K = -16 J (at the maximum position)

Since kinetic energy is always non-negative, the second equation is not physically possible. Therefore, the particle cannot reach the position where its kinetic energy is -16 J.

Therefore, the minimum position of the particle is the point where its kinetic energy is -8 J, and the maximum position is the point where its potential energy is 8 J.

To know more about conservative forces visit link :

https://brainly.com/question/31171503

#SPJ11

The translational kinetic energy of the barbell is approximately 0.12321 J (Joules).

To calculate the translational kinetic energy (K_trans) of the barbell, you can use the formula:

K_trans = (1/2) * M * V^2

Here, M represents the total mass of the barbell and V represents the speed of the center of mass.

Given that the mass (m) of each ball is 0.9 kg, the total mass (M) of the barbell would be:

M = 2 * m = 2 * 0.9 kg = 1.8 kg

The speed (V) of the center of mass of the barbell is given as 0.37 m/s.

Now, you can calculate the translational kinetic energy:

K_trans = (1/2) * 1.8 kg * (0.37 m/s)^2
K_trans = 0.9 kg * 0.1369 m^2/s^2
K_trans ≈ 0.12321 kg*m^2/s^2

For more such questions on Translational kinetic energy.

https://brainly.com/question/30107920#

#SPJ11

Cause: Human population grows worldwide.

Effect: Fossil fuels burn, cities become more industrialized, glaciers melt, climates change, and rain falls in unusual amounts.

Global warming refers to the long-term increase in Earth's average surface temperature, primarily due to the increasing levels of greenhouse gases, such as carbon dioxide, in the atmosphere. These gases trap heat from the sun, preventing it from radiating back into space and causing the Earth's temperature to rise.

Global warming has a range of potential impacts, including rising sea levels, more frequent and severe heat waves, changes in precipitation patterns, and more intense storms. It is considered one of the most significant and pressing environmental challenges facing the planet today.

Find out more on global warming here: https://brainly.com/question/3553382

#SPJ1

The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.

(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]

The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].

(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].

(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]

(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].

To learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).

Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.

The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:

weight = mass x acceleration due to gravity.

we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.

Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).

Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.

Answer:

Explanation: honestly i don’t speak spanish so please explain with english

The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

The work done by friction is equal to the change in the kinetic energy of the crate, which is zero because it slides down the ramp at a constant speed. Therefore, the friction force does negative work equal in magnitude to the work done by the gravitational force on the crate:

W_friction = -W_gravity

where

W_gravity = mgh

and h is the vertical distance that the crate slides down the ramp:

h = 12 sin 35° = 6.93 m

Thus,

W_friction = -mgh = -(900 N)(6.93 m)(9.81 m/s^2) = -60.8 kJ

The negative sign indicates that the work done by friction is in the opposite direction to the displacement of the crate, which is down the ramp. The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

Learn more about thermal energy

https://brainly.com/question/18989562

#SPJ4

Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:

1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.

These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.

To know more about Ampere's Law with Maxwell's Addition:

https://brainly.com/question/29831953

#SPJ11

where

m is the mass

c is the specific heat capacity

ΔT is the change in temperature

In your problem,

m=2.5 kg

c=2.60 kJ⋅°C-1kg-1

Δ

∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ

Answer:

Speed of Skater = 8.16 m/s

Explanation:

Using kinetic energy:

[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]

This gives the skater a velocity of 8.16 m/s after throwing the ball

When measuring the pendulum period, the interface should measure the time between two adjacent blocks of the photogate. This method is used because it accurately captures the time taken for the pendulum to complete one full oscillation.

The photogate is an optical device that detects the interruption of a light beam by the pendulum bob. As the pendulum swings, it passes through the photogate and blocks the light, triggering a timing event. When the pendulum returns and blocks the light again, another timing event is triggered.

Measuring the time between these two adjacent blocks allows the interface to determine the time taken for one complete oscillation (from one extreme to the other and back). This method is reliable and precise, as it directly measures the time it takes for the pendulum to cover its full path, which is the definition of its period.

Other measurement techniques, such as recording the time of multiple oscillations and dividing by the number of cycles, can also be used. However, using the time between adjacent blocks of the photogate provides a more direct and accurate measurement of the pendulum period.

Know more about photogate here:

https://brainly.com/question/13586408

#SPJ11  

When something gets in the way of the flow of electricity in a circuit, it is called resistance.

Resistance can come in many forms, such as a faulty wire, a broken switch, or a damaged component in the device being powered.

When resistance occurs, the flow of electricity is impeded, which can result in a number of issues such as a loss of power, damage to the device, or even a fire. It is important to identify and resolve any resistance in a circuit as soon as possible to ensure safe and efficient operation.

Resistance can be measured in units called ohms, and there are many tools available for testing and diagnosing resistance issues in electrical circuits.

For more such answers on Electrical Potential

https://brainly.com/question/19546125

#SPJ11

Based on its appearance in the visible-light view, M82 is classified as an irregular galaxy.

A galaxy is a vast collection of stars, gas, dust, and dark matter that are held together by gravity. Galaxies come in many different shapes and sizes, and they can contain anywhere from a few million to hundreds of billions of stars.

Based on its appearance in the visible-light view, M82 is an irregular galaxy. It has a distorted, asymmetric shape and lacks the clear spiral or elliptical structure that defines those types of galaxies. Its irregular shape suggests that it has experienced some kind of disturbance or interaction with other galaxies in the past.

Learn more about galaxy:

https://brainly.com/question/31459444

#SPJ11

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4

The radius of the bowling ball is approximately 7.65 inches.

We can use the formula for the surface area of a sphere to find the radius of the bowling ball:

Surface area of a sphere = 4πr²

where r is the radius of the sphere.

In this problem, we are given the surface area of a bowling ball, which is 232 square inches. We can use this information and the formula for surface area of a sphere to solve for the radius of the ball. Plugging this value into the formula, we get:

232 = 4πr²

Dividing both sides by 4π, we get:

r² = 58.5

Taking the square root of both sides, we get:

r ≈ 7.65 inches

To know more about surface area, here

brainly.com/question/31324403

#SPJ4