Bayer Villiger Provide a balanced chemical equation of the reaction performed in this experiment. Use structures and compound names to show ALL reactants and products involved. Baeyer-Villiger Reaction of Acetophenone Data Results
• Moles of acetophenone used: (Show calculations) 0.020 moles (2.40g/120.151 g mol-1 =0.0199 moles)
• Moles of mCPBA used: (Show calculations) 0.036 moles_(6.25 grams/ 172.56 g.mol-1)
• Expected mass of the product: (Show calculation. Clearly show the limiting and excess reactants)
Answers
Answer:
See the explanations
Explanation:
In the Baeyer-Villiger reaction, we will produce an ester from a ketone (see the first reaction). In our case, the ketone is Acetophenone therefore phenyl acetate would be produced.
Now, for the mass calculation, we have to keep in mind that we have a reaction with a 1:1 ratio. So, if we have 0.02 moles of acetophenone and 0.036 moles of m-CPBA the limiting reagent would be the smallest value in this case acetophenone.
Additionally, if we have a 1:1 ratio and the limiting reagent is 0.02 moles of acetophenone we will have as product 0.02 of phenyl acetate, if we take into account the molar mass of phenyl acetate (136.05 g/mol), we can do the final calculation:
[tex]0.02~mol~acetophenone\frac{1~mol~phenyl acetate}{1~mol~acetophenone}\frac{136.05~g~phenyl acetate}{1~mol~phenyl acetate}=2.72~g~phenyl acetate[/tex]
I hope it helps!
Related Questions
What is the molar concentration of H atoms at equilibrium if the equilibrium concentration of H2 is 0.28 M? Express your answer to two significant figures and include the appropriate units.
Answers
Answer:
0.56M
Explanation:
Molar concentration is defined as the ratio between moles of solute and volume in liters of solution.
In a 0.28M H₂ there are 0.28moles of H₂ per liter of solution.
Now, in 1 molecule of H₂ there are 2 atoms of H. Following this idea, in 0.28 moles of H₂ there are 0.28*2 = 0.56 moles of H atoms.
Thus, molar concentration of H atoms in a 0.28M H₂ is 0.56M
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite. Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
Find the amount of CO in the flask when the system returns to equilibrium.
Express your answer to two significant figures and include the appropriate units.
Answers
Answer:
0.44 moles
Explanation:
Given that :
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite.
The equilibrium constant [tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
The equilibrium constant [tex]K_c= \dfrac{(0.17 )(0.17)}{0.74}[/tex]
The equilibrium constant [tex]K_c= 0.03905[/tex]
Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
The equation for the reaction is :
[tex]H_2 + \dfrac{1}{2}O_2 \to H_2O \\ \\ 0.17 \ \ \ \ \ \ \ \ \ \to0.17[/tex]
Total mole of water now = 0.74+0.17
Total mole of water now = 0.91 moles
Again:
[tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
[tex]0.03905 = \dfrac{[0.17+x][x]}{[0.91 -x]}[/tex]
0.03905(0.91 -x) = (0.17 +x)(x)
0.0355355 - 0.03905x = 0.17x + x²
0.0355355 +0.13095 x -x²
x² - 0.13095 x - 0.0355355 = 0
By using quadratic formula
x = 0.265 or x = -0.134
Going by the value with the positive integer; x = 0.265 moles
Total moles of CO in the flask when the system returns to equilibrium is :
= 0.17 + x
= 0.17 + 0.265
= 0.435 moles
=0.44 moles (to two significant figures)
Green plants use light from the Sun to drive photosynthesis. Photosynthesis is a chemical reaction in which water and carbon dioxide chemically react to form the simple sugar glucose and oxygen gas . What mass of simple sugar glucose is produced by the reaction of 4.9 of carbon dioxide?
Answers
Answer:
3.3 g of glucose, C6H12O6.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
6CO2 + 6H2O —> C6H12O6 + 6O2
Next, we shall determine the mass of CO2 that reacted and the mass of C6H12O6 produced from the balanced equation.
This is illustrated below:
Molar mass of CO2 = 12 + (2x16) = 44 g/mol
Mass of CO2 from the balanced equation = 6 x 44 = 264 g
Molar mass of C6H12O6 = (12x6) + (12x1) + (16x6) = 180 g/mol
Mass of C6H12O6 from the balanced equation = 1 x 180 = 180 g
From the balanced equation above,
264 g of CO2 reacted to produce 180 g of C6H12O6.
Finally, we shall determine the mass of C6H12O6 produced by reacting 4.9 g of CO2 as follow:
From the balanced equation above,
264 g of CO2 reacted to produce 180 g of C6H12O6.
Therefore, 4.9 g of CO2 will react to produce = (4.9 x 180)/264 = 3.3 g of C6H12O6.
Therefore, 3.3 g of glucose, C6H12O6 were obtained from the reaction.
Draw the Lewis structure for methane (CH4) and ethane (C2H6) in the box below. Then predict which would have the higher boiling point. Finally, explain how you came to that conclusion.
Answers
Answer:
Ethane would have a higher boiling point.
Explanation:
In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.
Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.
I hope it helps!
The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.
We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.
We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.
Learn more: https://brainly.com/question/2510654
How many milliliters of a 0.250 MNaOHMNaOH solution are needed to completely react with 500. gg of glyceryl tripalmitoleate (tripalmitolein)
Answers
Answer:
[tex]7.48X10^3~mL[/tex]
Explanation:
For this question we have:
-) A solution NaOH 0.25 M
-) 500 g of glyceryl tripalmitoleate (tripalmitolein)
We can start with the reaction between NaOH and tripalmitolein. NaOH is a base and tripalmitolein is a triglyceride, therefore we will have a saponification reaction. The products of this reaction are glycerol and (E)-hexadec-9-enoate.
Now, with the reaction in mind, we can calculate the moles of NaOH that we need if we use the molar ratio between NaOH and tripalmitolein (3:1) and the molar mass of tripalmitolein (801.3 g/mol). So:
[tex]500~g~tripalmitolein\frac{1~mol~tripalmitolein}{801.3~g~tripalmitolein}\frac{3~mol~NaOH}{1~mol~tripalmitolein}=1.87~mol~NaOH[/tex]
With the moles of NaOH we can calculate the volume (in litters) if we use the molarity equation and the Molarity value:
[tex]M=\frac{mol}{L}[/tex]
[tex]0.25~M=\frac{1.87~mol~NaOH}{L}[/tex]
[tex]L=\frac{1.87~mol~NaOH}{0.25~M}[/tex]
[tex]L=7.48[/tex]
Now we can do the conversion to mL:
[tex]7.48~L~\frac{1000~mL}{1~L}=~7.48X10^3~mL[/tex]
I hope it helps!
If the equilibrium constant of the reaction is 0.85, then which statement is true if the mass of A is 10.5 grams; the density of B is 0.82 g/ml; the concentration of C is 0.64 M; and the concentration of D is 0.38 M.
A(s) + 3 B(l) _____ 2(aq) + D(aq)
Pick the correct statement about this system.
A. Q < K and reaction shifts left
B. Q > K and reaction shifts left
C. Q > K and reaction shifts right
D. Q = K and reaction does not shift
E. Q < K and reaction shifts right
Answers
Answer:
E. Q < K and reaction shifts right
Explanation:
Step 1: Write the balanced equation
A(s) + 3 B(l) ⇄ 2(aq) + D(aq)
Step 2: Calculate the reaction quotient (Q)
The reaction quotient, as the equilibrium constant (K), only includes aqueous and gaseous species.
Q = [C]² × [D]
Q = 0.64² × 0.38
Q = 0.15
Step 3: Compare Q with K and determine in which direction will shift the reaction
Since Q < K, the reaction will shift to the right to attain the equilibrium.
What compound is formed when 2,2-dimethyloxirane (2-methyl-1,2-epoxypropane) is treated with ethanol containing sulfuric acid
Answers
Answer:
2-ethoxy-2-methylpropan-1-ol
Explanation:
On this reaction, we have an "epoxide" (2-methyl-1,2-epoxypropane). Additionally, we have acid medium (due to the sulfuric acid [tex]H_2SO_4[/tex]). The acid medium will produce the hydronium ion ([tex]H^+[/tex]). This ion would be attacked by the oxygen of the epoxide. Then a carbocation would be produced, in this case, the most stable carbocation is the tertiary one. Then an ethanol molecule acts as a nucleophile and will attack the carbocation. Finally, a deprotonation step takes place to produce 2-ethoxy-2-methylpropan-1-ol.
See figure 1
I hope it helps!
Which is a nonpolar molecule?
Answers
Answer:
Explanation:
A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.
Balance the following redox reaction in acidic solution: H+(aq)+Zn(s)→H2(g)+Zn2+(aq) Express your answer as a chemical equation. Identify all of the phases in your answer. nothing
Answers
Answer:
The balanced equation is: Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)
Explanation:
Zn(s) is a simple substance (its oxidation number is zero) and it is oxidized to Zn²⁺. It loses two electrons, so the half reaction is the following:
Zn(s) → Zn²⁺(aq) + 2 e- (oxidation reaction)
Hydrogen ion (H⁺) is reduced to hydrogen gas (H₂). The oxidation number is decreased from +1 to 0 (because H₂ is a simple substance). H⁺ gains 1 electron per H atom, so the half reaction is the following:
2H⁺(aq) + 2 e- → H₂(g) (reduction reaction)
We obtain the overall reaction from the addition of the two half reactions. We write the reduction reaction first and then the oxidation reaction, as follows:
2H⁺(aq) + 2 e- → H₂(g)
+
Zn(s) → Zn²⁺(aq) + 2 e-
---------------------------------
Zn(s) + 2H⁺(aq) → Zn²⁺(aq) + H₂(g)
The two electrons at both sides of the equation (2 e-) are canceled. The overall reaction is in acidic solution due to the presence of H⁺ ions. The net charge at both sides is the same : +2, so the mass and the charge are balanced.
How many atoms of hydrogens are found in 3.21 mol of
C3H8?
Answers
Answer:
1.55 × 10²⁵ atoms of H
Explanation:
3.21mol C₃H₈ × 8mol H × (6.022×10²³)
AB2AB2 has a molar solubility of 3.72×10−4 M3.72×10−4 M. What is the value of the solubility product constant for AB2AB2? Express your answer numerically.
Answers
Answer:
Ksp = 2.06x10⁻¹⁰
Explanation:
For AB₂. solubility product constant, Ksp, is written as follows:
AB₂(s) ⇄ A²⁺ + 2Br⁻
Ksp = [A²⁺] [Br⁻]²
Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:
AB₂(s) ⇄ A²⁺ + 2Br⁻
AB₂(s) ⇄ X + 2X
where X are moles that are soluble (Molar solubility)
Ksp = [X] [2X]²
Ksp = 4X³As molar solubility of the salt is 3.72x10⁻⁴M:
Ksp = 4X³
Ksp = 4(3.72x10⁻⁴)³
Ksp = 2.06x10⁻¹⁰* Question Completion Status:
QUESTION 1
'What compound represents conjugate base in the following chemical reaction? H2SO4 + H2O HSO4 + H30+
O a. H2SO4
O b. H2O
O c. HSO4
O d. H30+
Answers
Answer: b. HSO4-
Explanation:
H2SO4 (sulfuric acid) will donate a hydrogen ion in solution to form H3O+(hydronium). The remaining HSO4- would be the conjugate base of this dissociation.
A conjugate base contains one less H atom and one more - charge than the acid that formed it.
A conjugate acid contains one more H atom and one more + charge than the base that formed it.
Which is one characteristic of producers?
They recycle nutrients.
They do not eat other organisms.
They break down waste for energy.
They use other organisms for energy.
Answers
Answer: They use other organisms for energy
Explanation:
Answer:
they use other organisms for energy
Explanation: d
Which is most likely to happen during a precipitation reaction?
A. A solid substance will break down into two new substances that
are gases.
B. An insoluble solid will form when ions in dissolved compounds
switch places.
C. A substance will react with oxygen to form water and carbon
dioxide.
D. A gas will form when positive ions switch places to form new
compounds.
Answers
Answer:
I think its B
Explanation:
Precipitation reactions leave a solid behind. The solid is called a precipitate.
Answer:
B
Explanation:
An insoluble solid will form when ions in dissolved compounds switch places.
A saturated solution was formed when 5.16×10−2 L of argon, at a pressure of 1.0 atm and temperature of 25 ∘C, was dissolved in 1.0 L of water.
Calculate the Henry's law constant for argon. it must be im M/atm
Answers
Answer:
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
Explanation:
Henry's Law indicates that the solubility of a gas in a liquid at a certain temperature is proportional to the partial pressure of the gas on the liquid.
C = k*P
where C is the solubility, P the partial pressure and k is the Henry constant.
So, being the concentration [tex]C=\frac{ngas}{V}[/tex]
where ngas is the number of moles of gas and V is the volume of the solution, you must calculate the number of moles ngas. This is determined by the Ideal Gas Law: P*V=n*R*T where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. So [tex]n=\frac{P*V}{R*T}[/tex]
In this case:
P=PAr= 1 atmV=VAr= 5.16*10⁻² LR=0.082 [tex]\frac{atm*L}{mol*K}[/tex]T=25 °C=298 °KThen:
[tex]n=\frac{1 atm*5.16*10^{-2} L}{0.082 \frac{atm*L}{mol*K} *298K}[/tex]
Solving:
n= 2.11 *10⁻³ moles
So: [tex]C=\frac{ngas}{V}=\frac{2.11*10^{-3} moles}{1 L} =2.11*10^{-3} \frac{moles}{L}= 2.11*10^{-3} M[/tex]
Using Henry's Law and being C=CAr and P =PAr:
2.11*10⁻³ M= k* 1 atm
Solving:
[tex]k=\frac{2.11*10^{-3} M}{1 atm}[/tex]
You get:
[tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]
The Henry's law constant for argon gas in 1 litre of water is 2.1 × 10⁻³M/atm.
What is Henry's law?Henry's law of gas states that solubility of a gas in any liquid at particular temperature is directly proportional to the partial pressure of the gas.
C∝P
C = kP, where
k = Henry's constant
P = partial pressure of gas
C is the solubility and it is present in the form of concentration and will be calculated as:
C = n/V
n = no. of moles
V = volume
And moles of the gas will be calculated by using the ideal gas equation as:
PV = nRT
n = (1)(5.16×10⁻²) / (0.082)(298) = 2.1 × 10⁻³ moles
And Concentration in liquid will be:
C = 2.1 × 10⁻³mol / 1L = 2.1 × 10⁻³ M
Now we put all these values in the first equation to calculate the value of k as:
k = (2.1 × 10⁻³M) / (1atm) = 2.1 × 10⁻³M/atm
Hence required value of k is 2.1 × 10⁻³M/atm.
To know more about Henry's law, viist the below link:
https://brainly.com/question/12823901
11. In TLC analysis of ferrocene and acetylferrocene (on silica TLC plate) which prediction is correct: A) ferrocene is more polar and moves higher up the plate (higher Rf value) B) Acetylferrocene is more polar and moves higher up the plate (higher Rf value) C) ferrocene is less polar and moves higher up the plate (higher Rf value) D) Acetylferrocene is less polar and moves higher up the plate (higher Rf value)
Answers
Answer:
Alternative C would be the correct choice.
Explanation:
The dual compounds were evaluated on something like a TLC plate through three separate additives in conducting a TLC study of ferrocene versus acetylferrocene.The polar as well as nonpolar ferrocene where nonpolar is about 0.63 with the maximum [tex]R_f[/tex] value, and indeed the polar is somewhere around 0.19 with [tex]R_f[/tex].TLC plate (30:1 toluene/ethanol) established with.The other three choices are not related to the given circumstances. So that option C would be the appropriate choice.
how are mass and weight affected in chemical reactions?
Answers
Answer:
How the chemical reacts
Explanation:
Draw a Lewis structure for one important resonance form of HBrO4 (HOBrO3). Include all lone pair electrons in your structure. Do not include formal charges in your structure.
Answers
Answer:
The Lewis structure is attached with the answer -
Explanation:
Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.
HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.
The Lewis structure is attached in form of image with representation of lone pairs of electrons.
Balance the following
Na+02-→ Na20
Al+O2 ->Al2O3
H2+12+ ->HI
Mg+H2O → Mg(OH)2+H2
Ca+O2 -> Cao
Answers
Answer:
1. Na + O2 → Na2O (Balanced)
2. 4Al + 3O2 → 2(Al2O3) (Balanced)
3. H2 + i2 → 2HI (Balanced)
4. Mg + 2H2O → Mg(OH)2+ H2 (Balanced)
5. 2Ca +O2 → 2CaO (Balanced)
Which relationship can be used to aid in the determination of the heat absorbed by bomb calorimeter? 
Answers
Answer:
ΔH = [tex]q_{p}[/tex]
Explanation:
In a calorimeter, when there is a complete combustion within the calorimeter, the heat given off in the combustion is used to raise the thermal energy of the water and the calorimeter.
The heat transfer is represented by
[tex]q_{com}[/tex] = [tex]q_{p}[/tex]
where
[tex]q_{p}[/tex] = the internal heat gained by the whole calorimeter mass system, which is the water, as well as the calorimeter itself.
[tex]q_{com}[/tex] = the heat of combustion
Also, we know that the total heat change of the any system is
ΔH = ΔQ + ΔW
where
ΔH = the total heat absorbed by the system
ΔQ = the internal heat absorbed by the system which in this case is [tex]q_{p}[/tex]
ΔW = work done on the system due to a change in volume. Since the volume of the calorimeter system does not change, then ΔW = 0
substituting into the heat change equation
ΔH = [tex]q_{p}[/tex] + 0
==> ΔH = [tex]q_{p}[/tex]
Where are the lanthanides and actinides found on the periodic table?
A. Columns 7 and 8
B. Columns 3 - 12, in the center of the table
C. Rows 6 and 7, separated from the rest of the table
D. Columns 1 and 2
Answers
Answer:
C. Rows 6 and 7, separated from the rest of the table
Explanation:
The lanthanides and actinides are groups of elements in the periodic table, that are thirty (30) in number. They are separated from the rest of the periodic table, usually appearing as separate rows at the bottom. They are often called the inner transition metals, because they all fill the f-block.
Therefore, the correct option is C
" They are found in Rows 6 and 7, separated from the rest of the table"
What is a major product of the reaction in the box?
Answers
Answer:
Molecule C
Explanation:
In this case, on the first reaction, we will have the production of a Grignard reagent. This molecule will react with [tex]D_2O[/tex] and a deuterium atom will be transferrred to the benzene ring. Then at the top of the molecule, we will have an acetal structure. This acetal can be broken by the action of the acid [tex]DCl[/tex], In the mechanism at the end, we will obtain a carbonyl group bonded to a hydrogen atom. Therefore we will have in the final product the aldehyde group. See figure 1 to further explanations.
I hope it helps!
Identify the elements that have the following abbreviated electron configurations.
A) [Ne] 3s23p5.
B) [Ar] 4s23d7.
C) [Xe] 6s1.
Answers
Answer:
A) Chlorine (Cl)
B) Cobalt (Co)
C) Caesium (Cs)
Hope this helps.
The abbreviated electron configurations that was given in the question belongs to
Chlorine (Cl)
Cobalt (Co)
Caesium (Cs) respectively.
Electronic configurations can be regarded as the electronic structure, which is the way an electrons is arranged in energy levels towards an atomic nucleus.The electron configurations is very useful when describing the orbitals of an atom in its ground state.To calculate an electron configuration, we can put the periodic table into sections, and this section will represent the atomic orbitals which is the regions that house the electrons. Groups one of the period table and two belongs to s-block, group 3 through 12 belongs to the d-block, while 13 to 18 can be attributed to p-block ,The rows that is found at bottom are the f-blockTherefore, electron configurations explain orbitals of an atom when it is in it's ground state.
Learn more at:https://brainly.com/question/21940070?referrer=searchResults
Given the initial rate data for the reaction being A + B + C --> D determine the rate expression for the reaction and the (k) rate constant. (The units of [A] [B] and [C] are all moles/liter and the units of IRR is moles/liter seconds). If the [A]=[B]=[C]=.30M, what would the IRR be? [A] [B] [C] IRR 0.20 0.10 0.40 .20 0.40 0.20 0.20 1.60 0.20 0.10 0.20 .20 0.20 0.20 0.20 .80
Answers
Answer:
k = 100 mol⁻² L² s⁻¹, r= k[A][B]²
Explanation:
A + B + C --> D
[A] [B] [C] IRR
0.20 0.10 0.40 .20
0.40 0.20 0.20 1.60
0.20 0.10 0.20 .20
0.20 0.20 0.20 .80
Comparing the third and fourth reaction, the concentrations of A and C are constant. Doubling the concentration of B causes a change in the rate of the reaction by a factor of 4.
This means the rate of reaction is second order with respect to B.
Comparing reactions 2 and 3, the concentrations of B and C are constant. Halving the concentration of A causes a change in the rate of the reaction by a factor of 2.
This means the rate of reaction is first order with respect to A.
Comparing reactions 1 and 3, the concentrations of A and B are constant. Halving the concentration of A causes no change in the rate of the reaction.
This means the rate of reaction is zero order with respect to C.
The rate expression for this reaction is given as;
r = k [A]¹[B]²[C]⁰
r= k[A][B]²
In order to obtain the value of the rate constant, let's work with the first reaction.
r = 0.20
[A] = 0.20 [B] = 0.10
k = r / [A][B]²
k = 0.20 / (0.20)(0.10)²
k = 100 mol⁻² L² s⁻¹
Aspirin (C9H8O4) is produced by the reaction of salicylic acid (C7H6O3, Molar mass = 138.1 g/mol) and acetic anhydride (C4H6O3, Molar mass = 102.1 g/mol) based on the BALANCED equation : C7H6O3(s) + C4H6O3(l ) → C9H8O4(s) + C2H4O2( l) If 63.07 grams of aspirin (Molar mass = 180.2 g/mol) was collected from an experiment when 138.1 grams C7H6O3 reacted with excess C4H6O3, what was the percent yield?
Answers
Answer:
35%
Explanation:
Percentage yield = actual yield / theoretical yield × 100.
Given:
Actual yield = 63.07g
Theoretical yield = ?
Mole ratio of C7H6O3 to C4H6O3 = 1 : 1
1 mole of C7H6O3 - 138.1g
Which implies that only 1 mole s[tex]\frac{63.07}{180.2} * 100[/tex]hould be used up in the reaction, yielding 180.2 g of C9H8O4. ⇒ Theoretical yield = 180.2g
∴ % Yield = [tex]\frac{63.07}{180.2} * 100[/tex]
= 35% yield.
Let me know if you found this easy to understand.
Calculate the entropy change for the reaction: HCl(g) + NH3(g) -> NH4Cl(s) Entropy data: HCl: 187 J/K mol NH3: 193 J/K mol NH4Cl: 94.6 J/K mol
Answers
Answer:
-285.4 J/K
Explanation:
Let's consider the following balanced equation.
HCl(g) + NH₃(g) ⇒ NH₄Cl(s)
We can calculate the standard entropy change for the reaction (ΔS°r) using the following expression.
ΔS°r = 1 mol × S°(NH₄Cl(s)) - 1 mol × S°(HCl(g)) - 1 mol × S°(NH₃(g))
ΔS°r = 1 mol × 94.6 J/K.mol - 1 mol × 187 J/K.mol - 1 mol × 193 J/K.mol
ΔS°r = -285.4 J/K
Answer:
-198.3 J/K mol
Explanation:
I got it correct on founders edtell
Write the electron configuration for the element titanium, TiTi. Express your answer in order of increasing orbital energy as a string without blank space between orbitals. For example, the electron configuration of LiLi could be entered as 1s^22s^1 or [He]2s^1.
Answers
Answer:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d² or [Ar] 3d² 4s²
Explanation:
Electron configuration can basically be referred to as the location of electron; how the electrons are arranged in the orbitals of the atoms.
Following Aufbau principle, electrons are arranged in the following order of orbitals.
1s 2s 2p 3s 3p 4s 3d and so on.
The s can hold a maximum of 2 electrons, p can hold a maximum of 6 electrons and d can hold a maximum of 10 electrons.
Titanium has an atomic number of 22. So the arrangement is given as;
Ti = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d²
The short hand notation is given as;
[Ar] 3d² 4s²
The electron configuration of Ti is
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex] or [tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
The electron configuration of an element is the distribution of electrons in atomic orbitals.
According to Aufbau's principle, the orbitals with lower energies are filled before the orbitals with higher energies.
We can know this order, using the diagonal rule (attached image).
The maximum number of electrons in each sublevel is:
s = 2p = 6d = 10f = 14Considering all these facts, and that Titanium has 22 electrons, the electron configuration of Ti is:
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex]
Since [tex]1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6}[/tex] is the electron configuration of Argon, this can also be written as:
[tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
The electron configuration of Ti is
[tex]Ti: 1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{2}[/tex] or [tex]Ti: [Ar] 4s^{2} 3d^{2}[/tex]
Learn more: https://brainly.com/question/21940070
Nylon 88 is made from the monomers H2N(CH2)8NH2 and HOOC(CH2)6COOH. So, would you characterize nylon 88 as rather an addition or a condensation polymer? Please explain your answer.
Answers
Answer:
Combination of H2N(CH2)8NH2 and HOOC(CH2)6COOH leads to the loss of water molecules at each linkage position.
Explanation:
A condensation polymer is a polymer formed when two monomers combine with the elimination of a small molecule such as water. The removal of the small molecule occurs at the point where the two monomers are joined to each other.
Nylon is known to form condensation polymers. This is because it involves the linkage of an -OH group to an -NH2 group. Water is eliminated in the process.
In the case of H2N(CH2)8NH2 and HOOC(CH2)6COOH, linkage of the both monomers at the 8 position of each chain leads to the formation of nylon- 8,8 with loss of water molecules at each linkage position. This stepwise loss of water molecules at each linkage makes it a condensation polymer.
Why are antiparallel beta sheets more stable than parallel beta sheets?
Answers
Answer:
The side chains of the amino acids alternate above and below the sheet
Explanation:
Hydrogen bonds are formed between the amine and carbonyl groups across strands. ... Antiparallel ß sheets are slightly more stable than parallel ß sheets because the hydrogen bonding pattern is more optimal.
A newly found element with the symbol J has two naturally occurring isotopes. Isotope one has an atomic mass of 139.905 amu and an abundance of 37.25%. Isotope two has an atomic mass of 141.709 amu and an abundance of 62.75%. Calculate the mass of the element.
Answers
Answer:
The mass of the element is 141.03701 amu
Explanation:
The catch here is that it notes a " newly found element. " Otherwise you could just refer to the average atomic mass of the element in the periodic table, and receive your solution in a much faster way.
The first isotope has an atomic mass of 139.905 amu, and a respective percent abundance of 37.25%. The second isotope has an atomic mass of 141.709 amu, and the remaining percent abundance, 100% - 37.25% = 62.75% ( given ). We can calculate the mass of the unknown element by associating each percentage with the mass of their respective isotope, over 100%.
Mass = ( ( 139.905 amu )( 37.25% ) + ( 141.709 amu )( 62.75% ) )/ 100,
Mass = ( ( 5211.46125 ) + ( 8892.23975 ) ) / 100,
Mass = ( 14103.701 ) / 100 = 141.03701 amu