Calculate the standard enthalpy change for the reaction at 25 ∘ C. Standard enthalpy of formation values can be found in this list of thermodynamic properties.HCl(g)+NaOH(s)⟶NaCl(s)+H2O(l)

Answers

Answer 1

Answer:

-179.06 kJ

Explanation:

Let's consider the following balanced reaction.

HCl(g) + NaOH(s) ⟶ NaCl(s) + H₂O(l)

We can calculate the standard enthalpy change for the reaction (ΔH°r) using the following expression.

ΔH°r = 1 mol × ΔH°f(NaCl(s)) + 1 mol × ΔH°f(H₂O(l)) - 1 mol × ΔH°f(HCl(g)) - 1 mol × ΔH°f(NaOH(s))

ΔH°r = 1 mol × (-411.15 kJ/mol) + 1 mol × (-285.83 kJ/mol) - 1 mol × (-92.31 kJ/mol) - 1 mol × (-425.61 kJ/mol)

ΔH°r = -179.06 kJ


Related Questions

Which is most likely to happen during a precipitation reaction?
A. A solid substance will break down into two new substances that
are gases.
B. An insoluble solid will form when ions in dissolved compounds
switch places.
C. A substance will react with oxygen to form water and carbon
dioxide.
D. A gas will form when positive ions switch places to form new
compounds.

Answers

Answer:

I think its B

Explanation:

Precipitation reactions leave a solid behind. The solid is called a precipitate.

Answer:

B

Explanation:

An insoluble solid will form when ions in dissolved compounds switch places.

The reaction, 2 SO3(g) <--> 2 SO2(g) + O2(g) is endothermic. Predict what will happen if the tem­perature is increased.

Answers

Explanation:

This reaction is in equilibrium and would hence obey lechatelier's principle. This principle states that whenever a system at equilibrium undergoes a change, it would react in way so as to annul that change.

Since it is an endothermic reaction, increasing the temperature would cause the reaction to shift towards the right.

This means that it favours product formation and more of the product would be formed.

Review the reversible reactions given, along with the associated equilibrium constant Kat room temperature. In each case, determine whether the forward or reverse reaction is favored.
CH3COOH → CH3C00^- + H^+
Ka=1.8 x 10^-5
AgCl → Ag^+ + Cl^-
Ksp=1.6 x 10^-10
Al(OH)3 → Al^3+ + 3OH^-
Ksp=3.7 x 10^-15
A+B → C
K=4.9 x 10^3

Answers

Answer:

The answers to your questions are given below

Explanation:

The following data were obtained from the question:

CH3COOH → CH3C00^- + H^+

Equilibrium constant, Ka = 1.8 x 10^-5

AgCl → Ag^+ + Cl^-

Equilibrium constant, Ksp = 1.6 x 10^-10

Al(OH)3 → Al^3+ + 3OH^-

Equilibrium constant, Ksp = 3.7 x 10^-15

A+B → C

Equilibrium constant, K = 4.9 x 10^3

When the value of the equilibrium constant is grater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.

When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.

When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.

Now, we shall the question given above as follow:

A. CH3COOH → CH3C00^- + H^+

Equilibrium constant, Ka = 1.8 x 10^-5

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

B. AgCl → Ag^+ + Cl^-

Equilibrium constant, Ksp = 1.6 x 10^-10

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

C. Al(OH)3 → Al^3+ + 3OH^-

Equilibrium constant, Ksp = 3.7 x 10^-15

Since the value of the equilibrium constant is lesser than 1, it means that the reverse reaction is favored.

D. A+B → C

Equilibrium constant, K = 4.9 x 10^3

Since the value of the equilibrium constant is greater than 1, it means that the forward reaction is favored.

The reaction conditions are:

A. The reverse reaction is favored.

B. The reverse reaction is favored.

C. The reverse reaction is favored.

D. The forward reaction is favored.

Chemical reaction:

A. [tex]CH_3COOH[/tex] → [tex]CH_3COO^- + H^+[/tex]

Equilibrium constant, Ka = [tex]1.8 * 10^{-5}[/tex]

B. [tex]AgCl[/tex] → [tex]Ag^+ + Cl^-[/tex]

Equilibrium constant, Ksp = [tex]1.6 * 10^{-10}[/tex]

C. [tex]Al(OH)_3[/tex] → [tex]Al^{3+} + 3OH^-[/tex]

Equilibrium constant, Ksp = [tex]3.7 * 10^{-15}[/tex]

D. A+B → C

Equilibrium constant, K = [tex]4.9 * 10^3[/tex]

Conditions for Equilibrium constant:

When the value of the equilibrium constant is greater than 1, it shows that the concentration of product is higher than that of the reactant and it implies that the forward reaction is favored.

When the value of the equilibrium constant is 1, it shows that the the concentration of the product and reactant are the same. Therefore neither the forward nor the reverse reaction is favored.

When the value of the equilibrium constant is lesser than 1, it shows that the concentration of the reactant is higher than the concentration of the product. Therefore, the reversed reaction is favored.

Thus, the reactions will be:

A. The reverse reaction is favored.

B. The reverse reaction is favored.

C. The reverse reaction is favored.

D. The forward reaction is favored.

Find  more information about Equilibrium constant here:

brainly.com/question/12858312

If the equilibrium constant of the reaction is 0.85, then which statement is true if the mass of A is 10.5 grams; the density of B is 0.82 g/ml; the concentration of C is 0.64 M; and the concentration of D is 0.38 M.
A(s) + 3 B(l) _____ 2(aq) + D(aq)
Pick the correct statement about this system.
A. Q < K and reaction shifts left
B. Q > K and reaction shifts left
C. Q > K and reaction shifts right
D. Q = K and reaction does not shift
E. Q < K and reaction shifts right

Answers

Answer:

E. Q < K and reaction shifts right

Explanation:

Step 1: Write the balanced equation

A(s) + 3 B(l) ⇄ 2(aq) + D(aq)

Step 2: Calculate the reaction quotient (Q)

The reaction quotient, as the equilibrium constant (K), only includes aqueous and gaseous species.

Q = [C]² × [D]

Q = 0.64² × 0.38

Q = 0.15

Step 3: Compare Q with K and determine in which direction will shift the reaction

Since Q < K, the reaction will shift to the right to attain the equilibrium.

AB2AB2 has a molar solubility of 3.72×10−4 M3.72×10−4 M. What is the value of the solubility product constant for AB2AB2? Express your answer numerically.

Answers

Answer:

Ksp = 2.06x10⁻¹⁰

Explanation:

For AB₂. solubility product constant, Ksp, is written as follows:

AB₂(s) ⇄ A²⁺ + 2Br⁻

Ksp = [A²⁺] [Br⁻]²

Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:

AB₂(s) ⇄ A²⁺ + 2Br⁻

AB₂(s) ⇄ X + 2X

where X are moles that are soluble (Molar solubility)

Ksp = [X] [2X]²

Ksp = 4X³

As molar solubility of the salt is 3.72x10⁻⁴M:

Ksp = 4X³

Ksp = 4(3.72x10⁻⁴)³

Ksp = 2.06x10⁻¹⁰

The accepted value of the number of Liters of gas in a mole is 22.4. List two possible reasons on why our experiment yielded a different value for the number of Liters in a mole of a gas.

Hint: Our experiment was conducted in July, in St. Paul, Minnesota.

Answers

Answer:

- Pressure in St. Paul, Minnesota

- Temperature in St. Paul, Minnesota

Explanation:

22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.

It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F

We can say, that the pressure was not 1 atm. St Paul Minnesota has  a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.

We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:

P . V = n . R . T

Pressure . Volume = number of moles . 0.082 L.atm /mol. K  . 273.15K

Number of moles must be 1 at STP, to determine a volume of 22.4L

Draw a Lewis structure for one important resonance form of HBrO4 (HOBrO3). Include all lone pair electrons in your structure. Do not include formal charges in your structure.

Answers

Answer:

The Lewis structure is attached with the answer -

Explanation:

Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.

HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.

The Lewis structure is attached in form of image with representation of lone pairs of electrons.

What compound is formed when 2,2-dimethyloxirane (2-methyl-1,2-epoxypropane) is treated with ethanol containing sulfuric acid

Answers

Answer:

2-ethoxy-2-methylpropan-1-ol

Explanation:

On this reaction, we have an "epoxide" (2-methyl-1,2-epoxypropane). Additionally, we have acid medium (due to the sulfuric acid [tex]H_2SO_4[/tex]). The acid medium will produce the hydronium ion ([tex]H^+[/tex]). This ion would be attacked by the oxygen of the epoxide. Then a carbocation would be produced, in this case, the most stable carbocation is the tertiary one. Then an ethanol molecule acts as a nucleophile and will attack the carbocation. Finally, a deprotonation step takes place to produce 2-ethoxy-2-methylpropan-1-ol.

See figure 1

I hope it helps!

A saturated solution was formed when 5.16×10−2 L of argon, at a pressure of 1.0 atm and temperature of 25 ∘C, was dissolved in 1.0 L of water.
Calculate the Henry's law constant for argon. it must be im M/atm

Answers

Answer:

The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

Explanation:

Henry's Law indicates that the solubility of a gas in a liquid at a certain temperature is proportional to the partial pressure of the gas on the liquid.

C = k*P

where C is the solubility, P the partial pressure and k is the Henry constant.

So, being the concentration [tex]C=\frac{ngas}{V}[/tex]  

where ngas is the number of moles of gas and V is the volume of the solution, you must calculate the number of moles ngas. This is determined by the Ideal Gas Law: P*V=n*R*T where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. So [tex]n=\frac{P*V}{R*T}[/tex]

In this case:

P=PAr= 1 atmV=VAr= 5.16*10⁻² LR=0.082 [tex]\frac{atm*L}{mol*K}[/tex]T=25 °C=298 °K

Then:

[tex]n=\frac{1 atm*5.16*10^{-2} L}{0.082 \frac{atm*L}{mol*K} *298K}[/tex]

Solving:

n= 2.11 *10⁻³ moles

So: [tex]C=\frac{ngas}{V}=\frac{2.11*10^{-3} moles}{1 L} =2.11*10^{-3} \frac{moles}{L}= 2.11*10^{-3} M[/tex]

Using Henry's Law and being C=CAr and P =PAr:

2.11*10⁻³ M= k* 1 atm

Solving:

[tex]k=\frac{2.11*10^{-3} M}{1 atm}[/tex]

You get:

[tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

The Henry's law constant for argon is [tex]k=2.11*10^{-3}\frac{ M}{atm}[/tex]

The Henry's law constant for argon gas in 1 litre of water is 2.1 × 10⁻³M/atm.

What is Henry's law?

Henry's law of gas states that solubility of a gas in any liquid at particular temperature is directly proportional to the partial pressure of the gas.

C∝P

C = kP, where

k = Henry's constant

P = partial pressure of gas

C is the solubility and it is present in the form of concentration and will be calculated as:
C = n/V

n = no. of moles

V = volume

And moles of the gas will be calculated by using the ideal gas equation as:

PV = nRT

n = (1)(5.16×10⁻²) / (0.082)(298) = 2.1 × 10⁻³ moles

And Concentration in liquid will be:

C = 2.1 × 10⁻³mol / 1L = 2.1 × 10⁻³ M

Now we put all these values in the first equation to calculate the value of k as:

k = (2.1 × 10⁻³M) / (1atm) = 2.1 × 10⁻³M/atm

Hence required value of k is 2.1 × 10⁻³M/atm.

To know more about Henry's law, viist the below link:

https://brainly.com/question/12823901

Calculate the heat absorbed by a sample of water that has a mass of 45.00 g when the temperature increases from 21.0oC to 38.5 oC. (s=4.184 J/g.o C)

Answers

Answer:

The heat absorbed by the sample of water is 3,294.9 J

Explanation:

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

The sensible heat of a body is the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous). Its mathematical expression is:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.

In this case:

Q=?m= 45 gc= 4.184 [tex]\frac{J}{g*C}[/tex]ΔT= Tfinal - Tinitial= 38.5 C - 21 C= 17.5 C

Replacing:

Q= 4.184 [tex]\frac{J}{g*C}[/tex] * 45 g* 17.5 C

Solving:

Q=3,294.9 J

The heat absorbed by the sample of water is 3,294.9 J

For each of the processes, determine whether the entropy of the system is increasing or decreasing. The system is underlined.
1. a snowman melts on a spring day
2. a document goes through a paper shredder
3. a water bottle cools down in a refrigerator
4. silver tarnishes
5. dissolved sigar precipitates out of water to form rock candy
A. Entropy is increasing
B. Entropy is decreasing

Answers

1. Increasing
2. Increasing
3. Decreasing
4. Increasing
5. Decreasing

Entropy is INCREASING when a snowman melts, a document goes through paper shredder, silver tarnishes, while it is DECREASING when dissolved sugar precipitates, water vapor forms droplets and water cools down.

Entropy can be defined as the degree of randomness or disorder of a particular system.

Entropy is equal to zero (0) for a perfectly ordered system.

Heat increases the entropy of the system because more energy excites the molecules and it increases the amount of random activity.

Moreover, the cooling decreases the entropy of the system because molecules are more ordered and it decreases the amount of random activity.

In conclusion, entropy is INCREASING when a snowman melts, a document goes through paper shredder, silver tarnishes, while it is DECREASING when dissolved sugar precipitates, water vapor forms water droplets and the water cools down.

Learn more in:

https://brainly.com/question/490678

Given a fixed amount of gas in a rigid container (no change in volume), what pressure will the gas exert if the pressure is initially 1.50 atm at 22.0oC, and the temperature is changed to 11.0oC?
A. 301 atm
B. 1.56 atm
C. 0.750 atm
D. 1.44 atm
E. 3.00 atm

Answers

Answer:

The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)

Explanation:

Gay Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move more rapidly. Then the number of collisions against the walls increases, that is, the pressure increases. That is, the gas pressure is directly proportional to its temperature.

Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T}=k[/tex]

Where P = pressure, T = temperature, K = Constant

You have a gas that is at a pressure P1 and at a temperature T1. When the temperature varies to a new T2 value, then the pressure will change to P2, and then:

[tex]\frac{P1}{T1}=\frac{P2}{T2}[/tex]

In this case:

P1= 1.50 atmT1= 22 °C= 295 °K (being 0°C= 273 °K)P2= ?T2= 11 °C= 284 K

Replacing:

[tex]\frac{1.5 atm}{295 K}=\frac{P2}{284 K}[/tex]

Solving:

[tex]P2= 284 K*\frac{1.5 atm}{295 K}[/tex]

P2=1.44 atm

The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)

How many moles of aqueous magnesium ions and chloride ions are formed when 0.250 mol of magnesium chloride dissolves in water

Answers

Answer:

0.250 mol Mg²⁺

0.500 mol Cl⁻

Explanation:

Magnesium chloride (MgCl₂) dissociates into ions according to the following equilibrium:

MgCl₂  ⇒  Mg²⁺ + 2 Cl⁻

1 mol      1 mol   2 mol

1 mol of Mg²⁺ and 2 moles of Cl⁻ are formed per mole of MgCl₂.  If we have 0.250 mol of MgCl₂, the following amounts of ions will be formed:

0.250 mol MgCl₂ x 1 mol Mg²⁺/mol MgCl₂= 0.250 mol Mg²⁺

0.250 mol MgCl₂ x 2 mol Cl⁻/mol MgCl₂= 0.500 mol Cl⁻

Answer:

HEY THE ANSWER ABOVE ME IS RIGHT!! i defientely misclicked my rating :/

5/5 all the way.

Explanation:

Draw the Lewis structure for methane (CH4) and ethane (C2H6) in the box below. Then predict which would have the higher boiling point. Finally, explain how you came to that conclusion.

Answers

Answer:

Ethane would have a higher boiling point.

Explanation:

In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.

Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.

I hope it helps!

The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.

We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.

We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.

Learn more: https://brainly.com/question/2510654

If the H+ concentration is 0.00001 M, what is the OH- concentration?

Answers

Answer:

1.00x10^-9

Explanation:

Determine the volume occupied by 10 mol of helium at
27 ° C and 82 atm

Answers

Answer:

3.00 L

Explanation:

PV = nRT

(82 atm × 101325 Pa/atm) V = (10 mol) (8.314 J/mol/K) (27 + 273) K

V = 0.00300 m³

V = 3.00 L

Assume that a nickel weighs exactly 5.038650 g for the sets of weights listed below obtained by a single weighing on the balance below

Answers

Answer:

afshkkyfugutuiryfyi

If D+2 would react with E-1, what do you predict to be the formula?

Answers

Answer:

DE2

Explanation: for every one D+2 you need two E-1 because +2=-2

Aspirin (C9H8O4) is produced by the reaction of salicylic acid (C7H6O3, Molar mass = 138.1 g/mol) and acetic anhydride (C4H6O3, Molar mass = 102.1 g/mol) based on the BALANCED equation : C7H6O3(s) + C4H6O3(l ) → C9H8O4(s) + C2H4O2( l) If 63.07 grams of aspirin (Molar mass = 180.2 g/mol) was collected from an experiment when 138.1 grams C7H6O3 reacted with excess C4H6O3, what was the percent yield?

Answers

Answer:

35%

Explanation:

Percentage yield = actual yield / theoretical yield × 100.

Given:

Actual yield = 63.07g

Theoretical yield = ?

Mole ratio of C7H6O3 to C4H6O3 = 1 : 1

1 mole of C7H6O3 - 138.1g

Which implies that only 1 mole s[tex]\frac{63.07}{180.2} * 100[/tex]hould be used up in the reaction, yielding 180.2 g of C9H8O4. ⇒ Theoretical yield = 180.2g

∴ % Yield = [tex]\frac{63.07}{180.2} * 100[/tex]

= 35% yield.

Let me know if you found this easy to understand.

Which relationship can be used to aid in the determination of the heat absorbed by bomb calorimeter? 

Answers

Answer:

ΔH = [tex]q_{p}[/tex]

Explanation:

In a calorimeter, when there is a complete combustion within the calorimeter, the heat given off in the combustion is used to raise the thermal energy of the water and the calorimeter.

The heat transfer is represented by

[tex]q_{com}[/tex] = [tex]q_{p}[/tex]

where

[tex]q_{p}[/tex] = the internal heat gained by the whole calorimeter mass system, which is the water, as well as the calorimeter itself.

[tex]q_{com}[/tex]  = the heat of combustion

Also, we know that the total heat change of the any system is

ΔH = ΔQ + ΔW

where

ΔH = the total heat absorbed by the system

ΔQ = the internal heat absorbed by the system which in this case is [tex]q_{p}[/tex]

ΔW = work done on the system due to a change in volume. Since the volume of the calorimeter system does not change, then ΔW = 0

substituting into the heat change equation

ΔH = [tex]q_{p}[/tex] + 0

==> ΔH = [tex]q_{p}[/tex]

A 400 mL sample of hydrogen gas is collected over water at 20°C and 760 torr the vapor pressure of water at 20°C is 17.5 torr. what volume will the dry hydrogen gas occupy at 20°C and 760 torr?

Answers

Answer:

V2 = 17371.43ml

Explanation:

We use Boyles laws

since temperature is constant

P1V1=P2V2

760 x 400 = 17.5 x V2

304000 = 17.5 x V2

V2 = 304000/17.5

V2 = 17371.43ml

The volume will the dry hydrogen gas occupy at the temperature of 20°C and vapor pressure at  760 torrs will be 18 ml.

What is vapor pressure?

The vapor pressure of a liquid is independent of the volume of liquid in the container, whether one liter or thirty liters; both samples will have the same vapor pressure at the same temperature.

The temperature has an exponential connection with vapor pressure, which means that as the temperature rises, the vapor pressure rises as well the equation is -

P1 V1 / T1 = P2 V2 / T1

here, P = pressure

       T = temperature

        V = volume

substituting the value in the equation,

400 ×760 / 20 = 17.5× V / 20

V = 400× 760 / 20 × 17.5 / 20

V = 18 ml

Therefore the volume of the hydrogen gas remaining at this temperature will be 18 ml.

learn more about vapor pressure, here :

https://brainly.com/question/27682495

#SPJ5

Iron(II) is available to bond with chloride ion. How many of each type of ion will bond to form an ionic compound?

A) 3 iron(II), 1 chloride

B) 2 iron(II), 3 chloride

C) 2 iron(II), 1 chloride

D) 1 iron(II), 2 chloride

Answers

Answer:

D) 1 iron(II), 2 chloride

Explanation:

Iron II chloride is the compound; FeCl2. It is formed as follows, ionically;

Fe^2+(aq) + 2Cl^-(aq) -----> FeCl2

The formation of one mole of FeCl2 involves the reaction one mole of iron and two moles of chloride ions. This means that in FeCl2, the ratio of iron to chlorine is 1:2 as seen above.

Therefore there is one iron II ion and two chloride ions in each mole of iron II chloride, hence the answer.

Solid iron(II) oxide reacts with oxygen gas to produce solid iron(III) oxide. Balance the equation for this reaction (in lowest multiple integers). Write the unbalanced equation for this reaction.

Answers

Answer

Hello

I think the reaction is like this FeO+OFe²O³

And the balance reaction is 2Fe+OFe²O³

Explanation:

At first we should find sth that has more atoms than the other then for example we realized that we have two atoms of Fe in Fe²O³ then put 2 before FeO and now we have 2 atoms of Fe in right side and 2 atoms of Fe in left then Oxygen in FeO change to 2 atoms of Oxygen and we have an other one in right side that they become 3 atoms of Oxygen and now we have 3 atoms of Oxygen in both right and left side.

Finally our reaction balanced.

Good luck

Find the [OH−] of a 0.32 M methylamine (CH3NH2) solution. (The value of Kb for methylamine (CH3NH2) is 4.4×10−4.) Express your answer to two significant figures and include the appropriate units.

Answers

Answer:

[tex][OH^-]=0.01165M[/tex]

Explanation:

Hello,

In this case, for the dissociation of methylamine:

[tex]CH_3NH_2(aq)+H_2O(l)\rightleftharpoons CH_3NH_3^+(aq)+OH^-(aq)[/tex]

We can write the basic dissociation constant as:

[tex]Kb=\frac{[CH_3NH_3^+][OH^-]}{[CH_3NH_2]}[/tex]

That in terms of the reaction extent [tex]x[/tex], turns out:

[tex]Kb=\frac{x*x}{[CH_3NH_2]_0-x}[/tex]

[tex]4.4x10^{-4}=\frac{x^2}{0.32M-x}[/tex]

That has the following solution for [tex]x[/tex]:

[tex]x_1=-0.01209M\\x_2=0.01165M[/tex]

Yer 0.01165M is valid only as no negative concentrations are eligible. It means that it is the concentration of hydroxyl ions in the solution:

[tex][OH^-]=0.01165M[/tex]

Best regards.

Why are antiparallel beta sheets more stable than parallel beta sheets?

Answers

Answer:

The side chains of the amino acids alternate above and below the sheet

Explanation:

Hydrogen bonds are formed between the amine and carbonyl groups across strands. ... Antiparallel ß sheets are slightly more stable than parallel ß sheets because the hydrogen bonding pattern is more optimal.

how are mass and weight affected in chemical reactions?

Answers

Answer:

How the chemical reacts

Explanation:

Sulfuric acid is commonly used as an electrolyte in car batteries. Suppose you spill some on your garage floor. Before cleaning it up, you wisely decide to neutralize it with sodium bicarbonate (baking soda) from your kitchen. The reaction of sodium bicarbonate and sulfuric acid is

Answers

Answer:

The mass of NaHCO3 required is 235.22 g

Explanation:

*******

Continuation of Question:

2NaHCO3(s) + H2SO4(aq)  →  Na2SO4(aq) + 2CO2(g) + 2H2O(l)

You estimate that your acid spill contains about 1.4 mol H2SO4. What mass of NaHCO3 do you need to neutralize the acid?

********\

The question requires us to calculate the mass of NaHCO3  to neutralize the acid.

From the balanced chemical equation;

1 mol of H2SO4 requires 2 mol of NaHCO3

1.4 would require x?

Upon solving for x we have;

x = 1.4 * 2 = 2.8 mol of NaHCO3

The relationship between mass and number of moles is given as;

Mass = Number of moles * Molar mass

Mass = 2.8 mol * 84.007 g/mol

Mass =  235.22 g

Which is a nonpolar molecule?

Answers

Answer:

Explanation:

A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents. The answer is hydrogen cyanide.

The second-order decomposition of HI has a rate constant of 1.80 · 10-3 M-1s-1. How much HI remains after 27.3 s if the initial concentration of HI is 4.78 M?

Answers

Answer:   3.87M  of HI remains after 27.3 s

Explanation:

Using the Second order decomposition equation of

1/[H]t =K x t +1/[A]o

Given initial concentration ,[A]o = 4.78M

time, t = 27.3 s

rate of constant , k= 1.80 x 10^-3 M-1s-1

1/[H] t= 1/[A] t= concentration after time, t=?

SOLUTION

1/[A] t =kt +1/[A]o

1/[A] t =(1.80 x 10^-3 (27.3)+1/4.78

0.04914+0.2092=0.2583

1/[A] t =0.2583

[A] t =1/0.2583= 3.87M

Identify the elements that have the following abbreviated electron configurations.
A) [Ne] 3s23p5.
B) [Ar] 4s23d7.
C) [Xe] 6s1.

Answers

Answer:

A) Chlorine (Cl)

B) Cobalt (Co)

C) Caesium (Cs)

Hope this helps.

The abbreviated electron configurations that was given in the question belongs to

Chlorine (Cl)

Cobalt (Co)

Caesium (Cs) respectively.

Electronic configurations can be regarded as the  electronic structure, which is the way an electrons is arranged in energy levels towards an atomic nucleus.

The electron configurations is very useful when  describing  the orbitals of an atom in its ground state.

To calculate an electron configuration, we can put the periodic table into sections, and this section will represent the atomic orbitals which is the  regions that house the electrons.

Groups one of the period table and two belongs to s-block, group  3 through 12 belongs to the d-block, while  13 to 18 can be attributed to p-block ,The  rows that is found at bottom are the f-block

Therefore, electron configurations  explain orbitals of an atom when it is in it's ground state.

Learn more at:https://brainly.com/question/21940070?referrer=searchResults

Other Questions
factorize (X + 2 y)square - (2 x minus y) square 14Select the correct answerWhich equation describes the line graphed above?OA y = -41 - 5OB. y = -x - 4oc y = -51 - 4 9m^2n^2 + 2m^2n^2 - 3mn (05.05)Based on the graph, what is the initial value of the linear relationship?-4 -35/35 which is the largest dairy in asia and where it is located??? An estimated demand curve does not necessarily match actual data perfectly because A. it is not possible to accurately calculate the coefficients of the curve. B. demand is unpredictable. C. some factors that are not measured or observed may affect the curve. D. the random error term has too large of a range. Haver Company currently produces component RX5 for its sole product. The current cost per unit to manufacture the required 65,000 units of RX5 follows. Direct materials $ 5.00 Direct labor 9.00 Overhead 10.00 Total costs per unit $ 24.00 Direct materials and direct labor are 100% variable. Overhead is 80% fixed. An outside supplier has offered to supply the 65,000 units of RX5 for $18.00 per unit. Required: 1. Determine the total incremental cost of making 65,000 units of RX5. 2. Determine the total incremental cost of buying 65,000 units of RX5. 3. Should the company make or buy RX5 By the mid 1700's, there were overpeople living in the 13 American Colonies.A. 2.5 millionB. 250 thousandC. 500 thousand Fortune Enterprises is an all-equity firm that is considering issuing $13.5 million of perpetual debt. The interest rate is 10%. The firm will use the proceeds of the bond sale to repurchase equity. Fortune distributes all earnings available to stockholders immediately as dividends. The firm will generate $3 million of earnings before interest and taxes (EBIT) every year into perpetuity. Fortune is subject to a corporate tax rate of 40%. Suppose the personal tax rate on interest income is 55%, and the personal tax rate on equity income is 20%. What is the annual after-tax cash flow to debt holders under each plan in Q7? A. Debt holders get $0 mil. under the unlevered plan vs. 1.2 mil. under the levered plan B. Debt holders get $1.2 mil. under the unlevered plan vs. 0.66 mil. under the levered plan C. Debt holders get $0 mil. under the unlevered plan vs. 0.66 mil. under the levered plan D. Debt holders get $0 mil. under the unlevered plan vs. 0.6075 mil. under the levered plan In what ways does Penelope show her faithfulness to her long delayed husband as she interacts withthe suitors?She never lets her emotions overwhelm her but continues quietly weaving,She continues to move through her role as courteous hostess to the suitors.She flirts with the suitors, leading them to continue staying even though she really wants them goneShe daily weaves and then nightly unravels her father-in-law's funeral tapestry, delaying any decision she must make about herfuture.Her character qualities mirror those of Ulysses, Reflect the given preimage over y=1 followed by y=7. Find the new coordinates. What one transformation is this double reflection the same as? (Note: when you are reflecting over a y= line, the x-values of the preimage will remain the same and you will be changing the y-values) Historians still dont agree on the exact cause of the Salem witch trials. Several theories have been put forward explaining the motive behind the accusations: Economic Causes In Salem, some families were very rich, while others were poor. This disparity led to jealousy among some of the people. Several families were engaged in property disputes. Some of the accused were rich. If convicted, they would lose their land and property, which could then be bought by others. Suggesting that a person was a witch was one way of obtaining that persons property. Some of the accused were poor. They were outsiders, and wealthier townspeople looked down on them. Accusing these people of being witches was one way of eliminating them from the village. Political Causes In the recent past, there had been several disputes over who should govern the Massachusetts Colony. The colonists had also endured some violent conflicts with American Indians. These events created political turmoil and instability. People were upset, and they blamed their problems on a lack of effective leadership. The leaders, in turn, were eager to see others take the blame for social problems. Accusing people of witchcraft made the accused responsible for social and political problems. The supposed witches could be blamed for whatever was wrong with society. Leaders did not have to take responsibility for mistakes or try to make changes. Intellectual Causes People knew little about science in those days. They were afraid of things they didnt understand. People didnt know about the causes of disease. If a person became sick, they believed it might be because of a curse. Witchcraft was one way of explaining the unknown. Psychological Causes Most of the accusers were young women and girls. At that time, girls were supposed to be quiet and obedient. They had little power in society. Accusing others of witchcraft may have made them feel powerful. Some girls and women may have been under pressure to make up stories about witchcraft. Powerful people who had something to gain from seeing certain people in the town convicted of witchcraft may have pressured these women into testifying. Mass hysteria may have also played a role. Mass hysteria happens when large numbers of people respond to real or imagined threats in an emotional and unreasonable way. They become frightened, angry, and even violent. During times of mass hysteria, people may engage in mob violence, hunting down, shaming, and sometimes even killing those they believe are responsible for their troubles. The power of suggestion can contribute to mass hysteria. When one person claims to see, hear, or feel something, others may believe it to be true and swear they hear, see, or feel the same thing without knowing why. For instance, if you see your friends scratch themselves or yawn, you may start scratching or yawning too, even if you arent itchy or tired. This is one example of what psychologists call the power of suggestion. Review this source for additional information about the causes of the Salem witch trials: Causes for the Outbreak of Witch Hysteria in Salem Think about the different theories that have been presented so far. Do you feel that one theory is more convincing than the others? Do you believe there might be more than one cause involved? Write a short opinion piece of about 200 to 250 words explaining what you believe caused the witch accusations. Refer to the details and source provided above to support your opinion. Make sure you include an introductory statement and a conclusion. the perimeter of a square flower bed is 100 feet. what is the area of the flower bed in sqaure feet Si se deja caer una piedra desde un helicptero en reposo, entonces al cabo de 20 s cual ser la rapidez y la distancia recorrida por la piedra Which of the following would likely be considered only an infraction?A. A parking violation by a driver with a previously perfect recordB. A violent crime under the aggravating circumstances of havingbeen provokedC. An act of arson that led to the destruction of property, but not tothe physical harm of any personD. A first act of shoplifting merchandise with a value of a fewhundred dollars 3/x-2, i'm confused as to what the horizontal asymptote is. The resources I found online conclude that it has a horizontal asymptote of y=0. I know that in order for a horizontal asymptote to be y=0, the denominator has to have a greater degree than the numerator. Im confused because doesn't the numerator have the same degree as the denominator (degree of 1)? Suppose you are looking into the end of a long cylindrical tube in which there is a uniform magnetic field pointing away from you. If the magnitude of the field is decreasing with time the direction of the induced magnetic field is During 2014 Carne Corporation transferred inventory to Nolan Corporation and agreed to repurchase the merchandise early in 2015. Nolan then used the inventory as collateral to borrow from Norwalk Bank, remitting the proceeds to Carne. In 2015 when Carne repurchased the inventory, Nolan used the proceeds to repay its bank loan. On whose books should the cost of the inventory appear at the December 31, 2014balance sheet date? a. Carne Corporation b. Nolan Corporation c. Norwalk Bank d. Nolan Corporation, with Carne making appropriate note disclosure of the transaction IF U DO THIS FOR ME I WILL GIVE U TONS OF POINTS PLSSSS HELP AND DO THE WHOLE THING :) Instructions Search your home for a rectangular prism. Some examples are a cereal box, a CD case, or a coffee table. Measure your prism using appropriate units, such as inches, centimeters, or feet. Complete the following. Show all work for calculations. List the dimensions of your box. Be sure to include the units (in, cm, ft, etc.). Describe the shape of the cross section when the box is cut parallel to the base. What is the surface area of the box? What is the surface area of the box if it is scaled up by a factor of 10? What is the volume of the box? What is the volume of the box if it is scaled down by a factor of 1 over 10? solve the rational equation 5/x = 4x+1/x^2