Is the following nuclear reaction balanced?

Answer:

2 hrs

Explanation:

time = distance ÷ speed

Answer:

e_{r} = Δa /a + Δd /Δ d + Δg / g

Explanation:

The error or uncertainty of a quantity is given by several factors, the most direct error is the absolute one that is given by the appreciation of the instruments, when some quantities obtained by a mathematical formula we must know how each error is programmed in the total error, we can see this with the relative error

the calculated quantity is Z

its relative error is

            [tex]e_{r}[/tex] = ΔZ/Z = 1/Z  (dZ /da Δa + dZ /dd Δd + dZ /dg Δg)

            e_{r} = 1 / Z (d /g  Δa + a /g  Δd + ad !1/g²! Δg)

            e_{r} = Δa /a + Δd /Δ d + Δg / g

notice that we take the worst case.

The measured quantities have absolute errors Da, Dd, Dg

Answer:

The deviation of a mirror is equal to twice the angle of incidence.The total angle between the straight-line path and the reflected ray is twice the angle of incidence. This is called the deviation of the light and measures the angle at which the light has strayed from its initial straight-line path.

HOPE IT HELPS :)

PLEASE MARK IT THE BRAINLIEST!

Answer:

A = [m/s]

B = [m/s²]

Explanation:

Assuming that V has SI units of m/s, then A and BT must also have units of m/s.

A = [m/s]

BT = [m/s]

Since T has SI units of s:

B [s] = [m/s]

B = [m/s²]

Answer:

Explanation:

We shall apply gas law formula to get the solution .

P₁ V₁ / T₁ = P₂ V₂ / T₂

P₁ = 10⁵ + 18 x 10³ x 9.8  where 10⁵ Pa is atmospheric  pressure at surface

= 1.764 x 10⁵ + 10⁵

= 2.764 x 10⁵

2.764 x 10⁵  x 3 / ( 273 + 9 ) = 10⁵ x V₂ / ( 273 + 22 )

V₂ = 8.67 cm³

Answer:

B. they have less mass than their reactants

Explanation:

In both nuclear fission and nuclear fusion, the products have less mass than their reactants. So, option B is correct.

Nuclear reaction is defined as the reaction that involves the collision between one or more atomic nuclei and a highly energetic subatomic particle to produce one or more nuclei along with the emission of a large amount of energy.

Here,

Nuclear fission and fusion are two types of nuclear reactions that involves the production of large amount of energy from atomic nuclei.

Nuclear fission is the nuclear reaction in which a heavier nucleus is split into two or more lighter nuclei, under radioactive condition, with the release of a massive amount of energy.

Nuclear fusion is the nuclear reaction in which two or more lighter nuclei nuclei fuse together under radioactive condition and forms a heavier nuclei and by releasing a large amount of energy.

In both nuclear fission and nuclear fusion, there occurs a release of large amount of energy. This is because most of the mass of the reactants is converted into energy which is known as the mass-energy. So the products of these nuclear reactions will have lesser mass than their reactants.

Hence,

In both nuclear fission and nuclear fusion, the products have less mass than their reactants.

To learn more about nuclear reactions, click:

https://brainly.com/question/12786977

#SPJ3

Answer:

if it's velocity u talking of.....

Explanation:

then it's displacement/ time

Answer:

Explanation:

1. A parsec is defined as the distance from the Sun which would result in a parallax of_TWO____ arcsecond as seen from Earth when observed 6 months apart.

2. One parsecs is about_3.3____light years

3. The more distant a star, the_LESS ____its parallax.

4. The statement "we can measure stellar parallax for most stars in our galaxy" is__TRUE .___.

5. The closest stars have parallaxes smaller than_.002 _____arcsecond.

6. The first successful measurements of stellar parallax were made by_Friedrich Bessel_____in year_1838_____for the star named.

7. Star Fred has parallax four times greater than star Bob. Star Fred is__4____times_nearer_____than star Bob.

Answer:

Time seem to flow only in one direction because if it started to go in backward direction that would break the second law of thermodynamics. We do not find time to be moving in any direction because time is not an object that can move nor is it a force that can move any object.

Answer:

1.) 440 Hz

2.) 659.3 Hz

Explanation:

1.) Given parameters are:

wavelength = 0.77955 m.

speed of sound = 343.00 m/s

Frequency = speed/ wavelength

Substitute speed and wavelength into the formula

Frequency = 343/ 0.77955

Frequency = 439.99

Frequency = 440 Hz approximately

2.) The parameters given are:

wavelength = 0.52028 m.

speed of sound = 343.00 m/s

Using the same formula

Frequency = speed/wavelength

Substitute all the parameters into the formula

Frequency = 343 / 0.52028

Frequency = 659.3 Hz approximately

The pitch of a note depends on the frequency of the sound waves.

The pitch of a sound increases as the frequency of the sound waves increases.

Answer:

1.) 440 Hz

2.) 659.3 Hz

Explanation:

1.) Given parameters are:

wavelength = 0.77955 m.

speed of sound = 343.00 m/s

Frequency = speed/ wavelength

Substitute speed and wavelength into the formula

Frequency = 343/ 0.77955

Frequency = 439.99

Frequency = 440 Hz approximately

2.) The parameters given are:

wavelength = 0.52028 m.

speed of sound = 343.00 m/s

Using the same formula

Frequency = speed/wavelength

Substitute all the parameters into the formula

Frequency = 343 / 0.52028

Frequency = 659.3 Hz approximately

The pitch of a note depends on the frequency of the sound waves.

The pitch of a sound increases as the frequency of the sound waves increases.

Answer:

A. 5.08 secs.

B. 10.16 secs.

C. 126.50 m.

D. 373.36 m

Explanation:

Data obtained from the question include the following:

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

A. Determination of the time taken to reach the peak.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =.?

t = u•Sine θ/g

t = (65 × Sine 50) /9.8

t = 5.08 secs.

B. Determination of the total time spent by the ball in air.

Time (t) taken to reach the peak = 5.08 secs.

Total time (T) spent by the ball in air =?

T = 2t

T = 2 × 5.08

T = 10.16 secs

Therefore, the total time spent by the ball in air is 10.16 secs.

C. Determination of the maximum height.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (H) =..?

H = u²•Sine² θ / 2g

H = 65² × (Sine 50)² / 2 × 9.8

H = 4225 × (Sine 50)² /19.6

H = 126.50 m

Therefore, the maximum height reached by the ball is 126.50 m.

D. Determination of the horizontal distance travelled by the ball.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Horizontal distance (R) =..?

R = u²•Sine 2θ / g

R = 65² × Sine (2×30) / 9.8

R = (4225 × Sine 60) / 9.8

R = 373.36 m

Therefore, the horizontal distance travelled by the ball is 373.36 m

Answer:

1.25x10^-19N

Explanation:see attached file pls

Answer:

D. AC+BD -> AD +BC

Explanation:

I got it right

A double displacement reaction is also called the double replacement reaction or double decomposition reaction. Here AC + BD → AD + BC is a double displacement reaction. The correct option is D.

A double displacement reaction is defined as a chemical reaction in which the positive and negative ions of two ionic compounds exchange their places to form two new compounds. The general form of a double displacement reaction is given as:

AC + BD → AD + BC

Here 'A' and 'B' are positively charged cations, whereas 'C' and 'D' are negatively charged anions. The double displacement reactions generally occur between the substances in an aqueous solution. In order for a reaction to occur, one of the products is usually a solid precipitate, a gas or a molecular compound like water.

Thus the correct option is D.

To know more about double replacement reaction, visit;

https://brainly.com/question/13870042

#SPJ3

Answer:

Flexibility Increases

Pre-breathe time decreases

Mass of suit decreases.

Explanation:

Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.

Answer:

625 cm²

Explanation:

The pressure is the same on both pistons.

F/A = F/A

200 N / 25 cm² = 5000 N / A

A = 625 cm²

Answer:

Explanation:

Friction causes generation of heat and causes increased wear and tear.

The friction is a resistive force and is related to heat energy, so an increase in friction results in the generation of heat, so option D is correct.

Two solid objects cannot roll or slide over one another due to the force of friction. Although frictional forces can be useful, such as the traction needed to walk without slipping, they can also present a large degree of resistance to motion. Automobile engines need about 20% of their power to overcome frictional forces in moving parts.

The fundamental source of friction between metals appears to be the adhesion forces between the contact zones of the surfaces, which are always microscopically uneven. Friction is produced by shearing, these "welded" seams, and the rubbing action of the rougher, tougher surface against the softer, smoother surface.

The friction is a resistive force trying to oppose the force applied As friction is related to heat when we increase the heat, the friction increases, and vice versa.

To know more about Friction:

https://brainly.com/question/28356847

#SPJ6

Answer:D

Explanation:

Apex

Answer:

yeah this statement is tru

Explanation:

it is because the speed of the bullet is more than the speed of rolling ball .so from this reason we cannot catch a bullet.

A bullet will be moving much faster than a rolling ball. Even seeing a bullet in flight requires it to be extremely low velocity.

Explanation:

m = kg. v=m/s. g=m/s^2. h= m

>>1/2mv^2=mgh

>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m

>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m>>kg m^2/s^2=kg m^2/s^2 the fraction 1/2 won't be able to make any changes to to the dimensional expression of energy i.e half of energy is still energy therefore you can neglect the number .

>>kg m^2/s^2=kg m^2/s^2

>>J= J

Answer:

The answer is B.

Explanation:

Given that the current (Ampere) in a series circuit is same so we can ignore it. We can assume that the total voltage is 60V and all the 3 resistance are different, 20Ω, 40Ω and 60Ω. So first, we have to find the total resistance by adding :

Total resistance = 20Ω + 40Ω + 60Ω

= 120Ω

Next, we have to find out that 1Ω is equal to how many voltage by dividing :

120Ω = 60V

1Ω = 60V ÷ 120

1Ω = 0.5V

Lastly, we have to calculate the voltage at R1 so we have to multiply by 20 (R1) :

1Ω = 0.5V

20Ω = 0.5V × 20

20Ω = 10V

Answer:

2.5 kg/m³

Explanation:

Absolute pressure = gauge pressure + atmospheric pressure

P = Pg + Pa

The gauge pressure caused by the weight of a fluid is called the static pressure.  It is equal to the density of the fluid × acceleration due to gravity × depth of the fluid,

Pg = ρgh

Therefore:

P = ρgh + Pa

300 Pa = ρ (10 m/s²) (8.00 m) + 100 Pa

ρ = 2.5 kg/m³

Answer:

The solenoid has 213 turns.

Explanation:

The number of the solenoid's turns (N) can be found as follows:

[tex] N = \frac{L*I}{\phi_{B}} [/tex]    (1)

Where:

L: is the self-inductance of the solenoid

I: is the current = 1.40 A

[tex]\phi_{B}[/tex]: is the magnetic flux = 0.00308 Wb      

The self-inductance of the solenoid (L) is:

[tex] L = \frac{|\epsilon|}{|dI/dt|} [/tex]   (2)

Where:

ε: is the induced emf = 12.2x10⁻³ V

dI/dt: is the rate changing of the current = 0.0260 A/s

By entering equation (2) into (1) we can find the number of turns:

[tex] N = \frac{|\epsilon|*I}{\phi_{B}|dI/dt|} = \frac{12.2 \cdot 10^{-3} V*1.40 A}{0.00308 Wb*0.0260 A/s} = 213 [/tex]        

Therefore, the solenoid has 213 turns.

I hope it helps you!

The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.

The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.

The square of the distance has an inverse relationship with the light intensity;

[tex]\rm I = \frac{1}{r^2}[/tex]

Where,

I is the light intensity

r is the distance

Let r is the distance and I is the sound intensity for case 2;

r' = 2r

[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]

When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.

Hence the value of the fraction is 1/4.

To learn more about the illumination refer;

https://brainly.com/question/20160684

#SPJ2

Answer:

2000 cm³

Explanation:

Assuming the pressure is constant:

V / T = V / T

1000 cm³ / 300 K = V / 600 K

V = 2000 cm³

Explanation:

Power = work / time

Power = force × distance / time

P = (650 kg) (10 m/s²) (20 m) / (15 s)

P = 8667 W

Answer:

The magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

Explanation:

Given;

distance between the two parallel wires, r = 10 cm = 0.1 m

current in the first wire, I₁ = 2A

current in the second wire, I₂ = 5 A

The force per unit length on each wire can be calculated as;

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r} \\\\\frac{F}{L} = \frac{4\pi*10^{-7}*2*5}{2\pi *0.1} \\\\\frac{F}{L} = 2 *10^{-5} \ N[/tex]/ m

The direction of the force between the two wires is attractive since the current in the two wires are in opposite direction.

Therefore, the magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

Answer:

59%

Explanation:

Data obtained from the question include the following:

Input temperature = 495 K

Output temperature = 293 K

Efficiency =?

The efficiency of the car engine can be obtained by multiplying the ratio of the output temperature to the input temperature by 100 as shown below:

Efficiency = output /input x 100

Efficiency = 293/495 x 100

Efficiency = 59.1 ≈ 59%

Therefore, the efficiency of the car engine is approximately 59%

Answer:

acceleration is the answer

Answer:

Acceleration

Explanation:

Answer:

Explanation:

the resistance of a electrical device

R = V² / P where V is volt and P is power .

The devices are in parallel so same volt will apply on them

So R₁ = 12² / 32.5 = 4.431 ohm

R₂ = 12² / 2 x 10³ = .072 ohm

when they are in series

Common Current in them = 12 / 4.431 + .072

= 2.6649 A

power consumed by first device when they are in series

= current² x resistance

= 2.6649² x 4.431 = 31.46 W

power consumed by other

= 2.6649² x .072  = .511 W

if it is horizontal line, that means position is same but time is increasing.

velocity=0 . particle is not even moving