The change in internal energy (ΔE) of the system is equal to -18823 Kilojoules.
Given the following data:
Quantity of heat = [tex]5.00 \times 10^2 \;kJ[/tex]Work done = [tex]4.50 \times 10^2 \;kcal[/tex]Conversion:
1 kcal = 4.184 kJ
[tex]4.50 \times 10^2 \;kcal[/tex] = [tex]4.50 \times 10^2 \times 4.184 = 18828 \; kJ[/tex]
To determine the change in internal energy (ΔE) of the system, we would apply the first law of thermodynamics.
Mathematically, the first law of thermodynamics is given by the formula:
[tex]\Delta E = Q - W[/tex]
Where;
[tex]\Delta E[/tex] is the change in internal energy.Q is the quantity of heat released.W is the work done.Substituting the given parameters into the formula, we have;
[tex]\Delta E = 5 - 18828\\\\\Delta E = -18823[/tex]
Change in internal energy, E = -18823 Kilojoules
Read more: https://brainly.com/question/20599052
An elastic circular bar is fixed at one end and attached to a rubber grommet at the other end. The grommet functions as a torsional spring with spring constant k. If a concentrated torque of magnitude Ta is applied in the center of the bar, what is the rotation at the end of the bar, φ(L)? Assume a constant shear modulus G and polar moment of inertia J.
Answer:
2.1 rad(anticlockwise).
Explanation:
So, we are given the following data or parameters or information in the question above:
=> "The torsional stiffness of the spring support is k = 50 N m/rad. "
=> "If a concentrated torque of mag- nitude Ta = 500 Nm is applied in the center of the bar"
=> "L = 300 mm Assume a shear modu- lus G = 10 kN/mm2 and polar monnent of inertia J = 2000 mln"
Hence;
G × J = 10 kN/mm2 × 2000 mln = 20 Nm^2.
Also, L/2 = 300 mm /2 = 0.15 m (converted to metre).
==> 0.15/20 (V - w) + θ = 0.
==> 0.15/20 (V - w ) = -θ.
Where V = k = 50 N m/rad
w = 183.3 θ.
Therefore, w + Vθ = 500 Nm.
==> 183.3 + 50 θ = 500 Nm.
= 6.3
Anticlockwise,
θ = 2.1 rad.
g a conductor consists of an infinite number of adjacent wires, each infinitely long. If there are n wires per unit length, what is the magnitude of B~
Answer:
B=uonI/2
Explanation:
See attached file
Do the math: How many seconds would it take an echo sounder’s ping to make the trip from a ship to the Challenger Deep (10,994 meters) and back? Recall that depth in meters = ½ (1500 m/sec × Echo travel time in seconds). Round your answer to two decimal places.
Answer:
14.66secsExplanation:
Given the formula for calculating the depth in metres expressed as
depth in meters = ½ (1500 m/sec × Echo travel time in seconds)
Given depth of the challenger = 10, 994 meters, we will substitute this given value into the formula given to calculate the time take for the echo to travel.
10, 994 = depth in meters = ½ * 1500 m/sec × Echo travel time in seconds
10,994 = 750 * Echo travel time in seconds
Dividing both sides by 750;
Echo travel time in seconds = 10,994 /750
Echo travel time in seconds ≈ 14.66secs (to two decimal places)
Therefore, it would take an echo sounder’s ping 14.66secs to make the trip from a ship to the Challenger Deep and back
Rank the six combinations of electric charges on the basis of the electric force acting on q1. Define forces pointing to the right as positive and forces pointing to the left as negative. Rank positive forces as larger than negative forces.
1. q1=+1nC
q2=-1nC
q3 =-1nC
2. q1= -1nC
+ q2 = + 1nC
q3= +1nC
3. q1= +1nC
q2= +1nC
q3= +1nC
4. q1= +1nC
q2= + 1nC
q3= -1nC
5. q1= -1nC
q2= - 1nC
q3= -1nC
6. q1=+1nC
q2=-1nC
q3 =+1nC
Answer:
Plss see attached file
Explanation:
two resistors of resistance 10 ohm's and 20 ohm's are connected in parallel to a batery of e.m.f 12V. Calculate the current passing through the 20hm's resister
Four 50-g point masses are at the corners of a square with 20-cm sides. What is the moment of inertia of this system about an axis perpendicular to the plane of the square and passing through its center
Answer:
moment of inertia I ≈ 4.0 x 10⁻³ kg.m²
Explanation:
given
point masses = 50g = 0.050kg
note: m₁=m₂=m₃=m₄=50g = 0.050kg
distance, r, from masses to eachother = 20cm = 0.20m
the distance, d, of each mass point from the centre of the mass, using pythagoras theorem is given by
= (20√2)/ 2 = 10√2 cm =14.12 x 10⁻² m
moment of inertia is a proportion of the opposition of a body to angular acceleration about a given pivot that is equivalent to the entirety of the products of every component of mass in the body and the square of the component's distance from the center
mathematically,
I = ∑m×d²
remember, a square will have 4 equal points
I = ∑m×d² = 4(m×d²)
I = 4 × 0.050 × (14.12 x 10⁻² m)²
I = 0.20 × 1.96 × 10⁻²
I = 3.92 x 10⁻³ kg.m²
I ≈ 4.0 x 10⁻³ kg.m²
attached is the diagram of the equation
A typical electric oven has two separate heating elements: one on top and one on the bottom. The bottom element is used for baking while the top element is used to broil foods. When only the bottom element is active and glowing red hot, what heat transfer mechanisms carry most of the heat to the food in the oven?
Answer:
Convection and Radiation mechanisms carry most of the heat
Explanation:
This is because Convection proceeds strongy as heated air rises from the hot element while Radiation is also strong, although the material of the cooking pots will how effective it is.
A person standing 180m from the foot of a high building claps hi
hand and hears the echo 0.03minutes later. What is the speed
sound in air at that temperature?
A) 331m/s
B) 240m/s C) 200m/s D) 300m/s
Answer:
C) 200 m/s
Explanation:
The sound travels a total distance of 360 m in 0.03 minutes.
v = (360 m) / (0.03 min × 60 s/min)
v = 200 m/s
A piece of electronic equipment that is surrounded by packing material is dropped so that it hits the ground with a speed of 4 m/s. After impact, the equipment experiences an acceleration of a = 2kx, where k is a constant and x is the compression of the packing material. If the packing material experiences a maximum compression of 20 mm, determine the maximum acceleration of the equipment.
Answer:
Maximum acceleration is 800m/s^2
Explanation:
See attached file
Two objects are in all respects identical except for the fact that one was coated with a substance that is an excellent reflector of light while the other was coated with a substance that is a perfect absorber of light. You place both objects at the same distance from a powerful light source so they both receive the same amount of energy U from the light. The linear momentum these objects will receive is such that:
Answer:
absorbent p = S / c
reflective p = 2S/c
Explanation:
The moment of radiation on a surface is
p = U / c
where U is the energy and c is the speed of light.
In the case of a fully absorbent object, the energy is completely absorbed. The energy carried by the light is given by the Poynting vector.
p = S / c
in the case of a completely reflective surface the energy must be absorbed and remitted, therefore there is a 2-fold change in the process
p = 2S/c
"A power of 200 kW is delivered by power lines with 48,000 V difference between them. Calculate the current, in amps, in these lines."
Answer:
9.6×10⁹ A
Explanation:
From the question above,
P = VI.................... Equation 1
Where P = Electric power, V = Voltage, I = current.
make I the subject of the equation
I = P/V............. Equation 2
Given: P = 200 kW = 200×10³ W, V = 48000 V.
Substitute these vales into equation 2
I = 200×10³×48000
I = 9.6×10⁹ A.
Hence the current in the line is 9.6×10⁹ A.
Scientists studying an anomalous magnetic field find that it is inducing a circular electric field in a plane perpendicular to the magnetic field. The electric field strength is 4.0 mV/m at a point 1.5 m away from the center of the circle. At what rate is the magnetic field changing?
Answer:
The rate at which the magnetic field changes is [tex]\frac{\Delta B }{\Delta t } = - 5.33*10^{-3} \ T/ s[/tex]
Explanation:
From the question we are told that
The electric field strength is [tex]E = 4.0 mV/m = 4.0 *10^{-3} V/m[/tex]
The radius of the circular region where the electric field is induced is
[tex]d = 1.5 \ m[/tex]
Generally the induced electric field is mathematically represented as
[tex]E = - \frac{r}{2} * \frac{\Delta B }{\Delta t }[/tex]
The negative sign show that the induced electric field is acting in opposite direction to the change in magnetic field
Where [tex]\frac{\Delta B }{\Delta t }[/tex] is the change in magnetic field
So
[tex]\frac{\Delta B }{\Delta t } = - \frac{2 * E }{r}[/tex]
substituting values
[tex]\frac{\Delta B }{\Delta t } = - \frac{2 * 4.0 *10^{-3}}{ 1.5 }[/tex]
[tex]\frac{\Delta B }{\Delta t } = - 5.33*10^{-3} \ T/ s[/tex]
1.5 kg of air within a piston-cylinder assembly executes a Carnot power cycle with maximum and minimum temperatures of 800 K and 300 K, respectively. The heat transfer from the air during the isothermal compression is 80 kJ. At the end of the isothermal compression, the volume is 0.2 m3. Determine the volume at the beginning of the isothermal compression, in m3. Assume the ideal gas model for air and neglect kinetic and potential energy effects.
Answer:
Explanation:
Carton cycle consists of four thermodynamic processes . The first is isothermal expansion at higher temperature , then adiabatic expansion which lowers the temperature of gas . The third process is isothermal compression at lower temperature and the last process is adiabatic compression which increases the temperature of the gas to its original temperature .
So the given process of isothermal compression must have been done at the temperature of 300K , keeping the temperature constant .
Work done on gas at isothermal compression is equal to heat transfer .
work done on gas = 80 x 10³ J
work done on gas = n RT ln v₁ / v₂
n is number of moles v₁ and v₂ are initial and final volume
molecular weight of gas = 28.97 g
1.5 kg = 1500 / 28.97 moles
= 51.77 moles
work done on gas = n RT ln v₁ / v₂
Putting the values in the equation above
80 x 10³ = 51.78 x 8.31 x 300 x ln v₁ / .2
ln v₁ / .2 = .62
v₁ / .2 = 1.8589
v₁ = 0.37 m³
An object has an acceleration of 6.0 m/s/s. If the net force was doubled and the mass was one-third the original value, then the new acceleration would be _____ m/s/s.
Hahahahaha. Okay.
So basically , force is equal to mass into acceleration.
F=ma
so when F=ma , we get acceleration=6m/s/s
Force is doubled.
Mass is 1/3 times original.
2F=1/3ma
Now , we rearrange , and we get 6F=ma
So , now for 6 times the original force , we get 6 times the initial acceleration.
So new acceleration = 6*6= 36m/s/s
A skater spins at 3rev/s when she stretches her arms outward. If she keeps her fists on her chest she can spin at 4.5rev/s and her body inertia is 3kg.m2. What is her body inertia when she stretches her arms outward?
Answer:
Body inertia I = 4.5 kg/m^2
Explanation:
Here, we want to calculate the body inertia when the arms are stretched outwards.
We know from the question that angular momentum is conserved
Thus;
I * 3 = 4.5 * 3
I = 4.5 kg/m^2
At what temperature will water begin to boil and turn to steam?
212 degrees Celsius
100 degrees Fahrenheit
212 kelvins
100 degrees Celsius
Answer:
100 degrees Celsius
Explanation:
Water starts to boil at 100 degrees celcius or 212 degrees fahrenheit.
At 100 degrees Celsius water begin to boil and turns to steam.
What are the boiling point and melting point of water?The melting point for water is 0 degrees C (32 degrees F). The boiling point of water varies with atmospheric pressure. At lower pressure or higher altitudes, the boiling point is lower. At sea level, pure water boils at 212 °F (100°C).
Is boiling water always 212?If the temperature is much above 212°F, the water will boil. That means that it won't just evaporate from the surface but will form vapor bubbles, which then grow, inside the liquid itself. If the water has very few dust flecks etc.
Learn more about a boiling point here https://brainly.com/question/40140
#SPJ2
Calculate the power of the eye in D when viewing an object 5.70 m away. (Assume the lens-to-retina distance is 2.00 cm. Enter your answer to at least one decimal place.)
Answer:
Power=50.17dioptre
Power=50.17D
Explanation:
P=1/f = 1/d₀ + 1/d₁
Where d₀ = the eye's lens and the object distance= 5.70m=
d₁= the eye's lens and the image distance= 0.02m
f= focal length of the lense of the eye
We know that the object can be viewed clearly by the person ,then image and lens of the eye's distance needs to be equal with the retinal and the eye lens distance and this distance is given as 0.02m
Therefore, we can calculate the power using above formula
P= 1/5.70 + 1/0.02
Power=50.17dioptre
Therefore, the power the eye's is using to see the object from distance is 5.70D
What is the wavelength λλlambda of the wave described in the problem introduction? Express the wavelength in terms of the other given variables and constants
Complete Question
The complete question is shown on the first uploaded image
Answer:
The wavelength is [tex]\lambda= \frac{2 \pi }{k}[/tex]
Explanation:
From the question we are told that
The electric field is [tex]\= E = E_o sin (kx - wt )\r j[/tex]
The magnetic field is [tex]\= B = B_0 sin (kx -wt) \r k[/tex]
From the above equation
and k is the wave number which is mathematically represented as
[tex]k = \frac{2 \pi }{\lambda }[/tex]
=> [tex]\lambda= \frac{2 \pi }{k}[/tex]
Where [tex]\lambda[/tex] is the wavelength
An inductor is connected to a 18 kHz oscillator. The peak current is 70 mA when the rms voltage is 5.4 V What is the value of the inductance L
Answer:
The value of the inductance is 0.955 mH
Explanation:
Given;
frequency of the oscillator, f = 18 kHz = 18,000 Hz
the peak current, I₀ = 70 mA = 0.07 A
the root mean square voltage, [tex]V_{rms}[/tex] = 5.4 V
The root mean square current is given as;
[tex]I_{rms}= \frac{I_o}{\sqrt{2} }[/tex]
[tex]I_{rms} = \frac{0.07}{\sqrt{2} } \\\\I_{rms} = 0.05 \ A[/tex]
Inductive reactance is given by;
[tex]X_L =\frac{V_{rms}}{I_{rms}} \\\\X_L = \frac{5.4}{0.05} \\\\X_L = 108 \ ohms[/tex]
Inductance is given by;
[tex]L = \frac{X_L}{2\pi f} \\\\L = \frac{108}{2\pi *18,000} \\\\L = 9.55 *10^{-4} \ H[/tex]
L = 0.955 mH
Therefore, the value of the inductance is 0.955 mH
The value of the inductance (L) for this oscillating circuit is equal to [tex]9.55 \times 10^{-4}[/tex] Henry.
Given the following data:
Oscillator frequency = 18 kHzPeak current = 70 mARms Voltage = 5.4 VTo determine the value of the inductance (L):
First of all, we would find the root mean square (rms) current by using the formula:
[tex]I_{rms} = \frac{I_o}{\sqrt{2} }\\\\I_{rms} = \frac{70 \times 10^{-3}}{1.4142} \\\\I_{rms} = 0.050 \;A[/tex]
Next, we would calculate the inductive reactance of the oscillator by using the formula:
[tex]X_L = \frac{V_{rms}}{I_{rms}} \\\\X_L = \frac{5.4}{0.050} \\\\X_L = 108 \; Ohms[/tex]
Now, we can solve for the value of the inductance (L):
[tex]L = \frac{X_L}{2\pi f}[/tex]
Where:
L is the inductance.f is the frequency.[tex]X_L[/tex] is the inductive reactance.Substituting the parameters into the formula, we have;
[tex]L = \frac{108}{2 \times 3.142 \times 18 \times 10^3} \\\\L = \frac{108}{113112}[/tex]
L = [tex]9.55 \times 10^{-4}[/tex] Henry.
Read more: https://brainly.com/question/12530980
Consider an electromagnetic wave where the electric field of an electromagnetic wave is oscillating along the z-axis and the magnetic field is oscillating along the x-axis.
In what directions is it possible that the wave is traveling?
A. The-z direction.
B. The ty direction
C. The +x direction.
D. The -y direction
E. The -x direction.
F. The +z direction.
Answer:
The wave will be travelling in the y-axis
Explanation:
An e-m wave has a spatially varying electric field that is always associated with a magnetic field that changes over time and vice versa. The electric field and the magnetic field oscillates perpendicularly to each other, and together form a wave that travels in a perpendicular direction to the magnetic and the electric field in space. The movement of the e-m wave through space is usually away from the source where it is generated. So, if the electric field travels in the z-axis, and the magnetic field travels through along the x-axis, then the e-m wave generated will travel in the y-axis direction.
A typical home uses approximately 1600 kWh of energy per month. If the energy came from a nuclear reaction, what mass would have to be converted to energy per year to meet the energy needs of the home
Answer:
7.68×10^25kg
Explanation:
The formula for energy used per year is calculated as
Energy used per year =12 x Energy used per month
By substituting Energy used per month in the above formula, we get
Energy used per year =12 x 1600kWh
= 19200kWh
Conversion:
From kWh to J:
1 kWh=3.6 x 10^6 J
Therefore, it is converted to J as
19200 kWh =19200 x 3.6 x 10^6 J
= 6.912×10^10 J
Hence, energy used per year is 6.912×10^10 J
To find the mass that is converted to energy per year.
E = MC^2 ............1
E is the energy used per year
C is the speed of light = 3.0× 10^8m/s
Where E= 6.912×10^10 J
Substituting the values into equation 1
6.912×10^10 J = M × 3.0× 10^8m/s
M = 6.912×10^10 J / (3.0× 10^8m/s)^2
M = 6.912×10^10 J/9×10^16
M = 7.68×10^25kg
Hence the mass to be converted is
7.68×10^25kg
Two protons are released from rest, with only the electrostatic force acting. Which of the following statements must be true about them as they move apart? (There could be more than one correct choice.)a. Their electrical potential energy keeps decreasing.b. Their acceleration keeps decreasing.c. Their kinetic energy keeps increasing.d. Their kinetic energy keeps decreasing.e. Their electric potential energy keeps increasing.
Answer:
Explanation:
correct options
a ) Their electrical potential energy keeps decreasing
Actually as they move apart , their electrical potential energy decreases due to increase of distance between them and kinetic energy increases
so a ) option is correct
b ) Their acceleration keeps decreasing
As they move apart , their mutual force of repulsion decreases due to increase of distance between them so the acceleration decreases .
c ) c. Their kinetic energy keeps increasing
Their kinetic energy increases because their electrical potential energy decreases . Conservation of energy law will apply .
The moving apart should be true statements:
a. The electrical potential energy should be reduced.
b. The acceleration should be reduced.
c. The kinetic energy should be increased.
True statements related to moving apart:At the time when the moving part, there is the reduction of the electric potential energy because there is a rise in the distance due to which the increment of the kinetic energy. The reduction of the mutual force of repulsion because of increment in the distance due to this the acceleration should be reduced. There is the increase in the kinetic energy due to the reduction of the electrical potential energy. here the law of conversation of energy should be applied.
Learn more about energy here: https://brainly.com/question/10658188
A stone with a mass m is dropped from an airplane that has a horizontal velocity v at a height h above a lake. If air resistance is neglected, the horizontal distance R from the point on the lake directly below the point of release to the point where the stone strikes the water is given by which formula? R=v(2h/g)2 None of these are correct. R = 2mv sqrt(2h/g) R = v sqrt(2h/g) R=(1/2)gt2
Answer:
R = v √(2h / g)
Explanation:
This exercise can be solved using the concepts of science, projectile launching
let's calculate the time it takes to get to the water
y = y₀ +[tex]v_{oy}[/tex] t - ½ g t²
as the stone is skipped the vertical speed is zero
y = y₀ - ½ g t²
for y=0
t = √ (2y₀ / g)
the horizontal distance it covers in this time is
R = v₀ₓ t
R = v₀ₓ √(2 y₀ / g)
let's call the horizontal velocity as v and the height is h
R = v √(2h / g)
Determine the slit spacing d. Explain which measurement you made, show your calculation and your result for the slit spacing. There are several measurements you can make.
Answer:
The quantities to measure are:
* the distance to the screen
* The distance from the central maximum to each interference
* in order of interference
* wavelength
Explanation:
To determine the gap spacing we must use the constructive interference equation
d sin θ = m λ
as the angles are small
tan θ = sin θ / cos θ
tan θ = sin θ
and the definition of tangent is
tan θ = y / L
Thus
sin θ = y / L
when replacing
d y / L = m λ
d = m λ L / y
with this equation we can know what parameter should be measured.
The quantities to measure are:
* the distance to the screen
* The distance from the central maximum to each interference
* in order of interference
* wavelength
A student builds a rocket-propelled cart for a science project. Its acceleration is not quite high enough to win a prize, so he uses a larger rocket engine that provides 39% more thrust, although doing so increases the mass of the cart by 13%. By what percentage does the cart's acceleration increase?
Answer:
Explanation:
a = F / m
where a is acceleration , F is thrust and m is mass
taking log and differentiating
da / a = dF / F - dm / m
(da / a)x 100 = (dF / F)x100 - (dm / m) x100
percentage increase in a = percentage increase in F - percentage increase in m
= percentage increase in acceleration a = 39 - 13 = 26 %
required increase = 26 %.
A 4g bullet, travelling at 589m/s embeds itself in a 2.3kg block of wood that is initially at rest, and together they travel at the same velocity. Calculate the percentage of the kinetic energy that is left in the system after collision to that before.
Answer:
The percentage of the kinetic energy that is left in the system after collision to that before is 0.174 %
Explanation:
Given;
mass of bullet, m₁ = 4g = 0.004kg
initial velocity of bullet, u₁ = 589 m/s
mass of block of wood, m₂ = 2.3 kg
initial velocity of the block of wood, u₂ = 0
let the final velocity of the system after collision = v
Apply the principle of conservation of linear momentum
m₁u₁ + m₂u₂ = v(m₁+m₂)
0.004(589) + 2.3(0) = v(0.004 + 2.3)
2.356 = 2.304v
v = 2.356 / 2.304
v = 1.0226 m/s
Initial kinetic energy of the system
K.E₁ = ¹/₂m₁u₁² + ¹/₂m₂u₂²
K.E₁ = ¹/₂(0.004)(589)² = 693.842 J
Final kinetic energy of the system
K.E₂ = ¹/₂v²(m₁ + m₂)
K.E₂ = ¹/₂ x 1.0226² x (0.004 + 2.3)
K.E₂ = 1.209 J
The kinetic energy left in the system = final kinetic energy of the system
The percentage of the kinetic energy that is left in the system after collision to that before = (K.E₂ / K.E₁) x 100%
= (1.209 / 693.842) x 100%
= 0.174 %
Therefore, the percentage of the kinetic energy that is left in the system after collision to that before is 0.174 %
Determine the position in the oscillation where an object in simple harmonic motion: (Be very specific, and give some reasoning to your answer.) has the greatest speed has the greatest acceleration experiences the greatest restoring force experiences zero restoring force g
Answer:
Explanation:
The greatest speed is attained at middle point or equilibrium point or where displacement from equilibrium point is zero .
When the object remains at one of the extreme point it experiences greatest acceleration but at that point velocity is zero . Due to acceleration , its velocity goes on increasing till it come to equilibrium point . At this point acceleration becomes zero . After that its velocity starts decreasing because of negative acceleration . Hence at middle point velocity is maximum .
The greatest acceleration is attained at maximum displacement or at one of the two extreme end .
Greatest restoring force too will be at position where acceleration is maximum because acceleration is produced by restoring force .
Restoring force is proportional to displacement or extension against restoring force . So it will be maximum when displacement is maximum .
Zero restoring force exists at equilibrium position or middle point or at point where displacement is zero . It is so because acceleration at that point is zero .
An 1300-turn coil of wire that is 2.2 cmcm in diameter is in a magnetic field that drops from 0.14 TT to 0 TT in 9.0 msms . The axis of the coil is parallel to the field.
What is the emf of the coil? (in V)
Answer:
The induced emf is [tex]\epsilon =7.68 \ V[/tex]
Explanation:
From the question we are told that
The number of turns is [tex]N = 1300 \ turns[/tex]
The diameter is [tex]d = 2.2 \ cm = 2.2*10^{-2}[/tex]
The initial magnetic field is [tex]B_i = 0.14 \ T[/tex]
The final magnetic field is [tex]B_f = 0 \ T[/tex]
The time taken is [tex]dt = 9.0ms = 9.0*10^{-3} \ s[/tex]
The radius is mathematically evaluated as
[tex]r = \frac{d}{2 }[/tex]
substituting values
[tex]r = \frac{2.2 *10^{-2}}{2 }[/tex]
[tex]r = 1.1*10^{-2} \ m[/tex]
The induced emf is mathematically represented as
[tex]\epsilon =- N * \frac{d\phi }{dt }[/tex]
Where [tex]d\phi[/tex] is the change in magnetic field which is mathematically represented as
[tex]d\phi = dB * A * cos\theta[/tex]
=> [tex]d\phi = [B_f - B_i ] * A * cos\theta[/tex]
Here [tex]\theta = 0[/tex] given that the axis of the coil is parallel to the field
Also A is the cross-sectional area which is mathematically represented as
[tex]A = \pi r^2[/tex]
substituting values
[tex]A = 3.142 * [1.1*10^{-2}]^2[/tex]
[tex]A = 3.8 *10^{-4] \ m^2[/tex]
So
[tex]d\phi = [0 - 0.14 ] * 3.8*10^{-4}[/tex]
[tex]d\phi = -5.32*10^{-5} \ weber[/tex]
So
[tex]\epsilon =- 1300 * \frac{-5.32*10^{-5} }{ 9.0*10^{-3} }[/tex]
[tex]\epsilon =7.68 \ V[/tex]
Which of the following explains why metallic bonding only occurs between
metallic atoms?
A. Metallic atoms are less likely to give their electrons to nonmetallic
atoms
B. Electrical conductivity is higher in metallic atoms, which means
they are more likely to attract free electrons.
C. Metallic atoms are highly reactive and do not tend to form bonds
with other atoms.
D. Metallic atoms have valence shells that are mostly empty, which
means these atoms are more likely to give up electrons and allow
them to move freely.
Answer:
D. Metallic atoms have valence shells that are mostly empty, which
means these atoms are more likely to give up electrons and allow
them to move freely.
Explanation:
Metals usually contain very few electrons in their valence shells hence they easily give up these few valence electrons to yield metal cations.
In the metallic bond, metal cations are held together by electrostatic attraction between the metal ions and a sea of mobile electrons.
Since metals give up their electrons easily, it is very easy for them to participate in metallic bonding. They give up their electrons easily because their valence shells are mostly empty, metal valence shells usually contain only a few electrons.
Question 8
A spring is attached to the ceiling and pulled 8 cm down from equilibrium and released. The
damping factor for the spring is determined to be 0.4 and the spring oscillates 12 times each
second. Find an equation for the displacement, D(t), of the spring from equilibrium in terms of
seconds, t.
D(t) =
Can someone please help me ASAP?!!!!
Answer: D(t) = [tex]8.e^{-0.4t}.cos(\frac{\pi }{6}.t )[/tex]
Explanation: A harmonic motion of a spring can be modeled by a sinusoidal function, which, in general, is of the form:
y = [tex]a.sin(\omega.t)[/tex] or y = [tex]a.cos(\omega.t)[/tex]
where:
|a| is initil displacement
[tex]\frac{2.\pi}{\omega}[/tex] is period
For a Damped Harmonic Motion, i.e., when the spring doesn't bounce up and down forever, equations for displacement is:
[tex]y=a.e^{-ct}.cos(\omega.t)[/tex] or [tex]y=a.e^{-ct}.sin(\omega.t)[/tex]
For this question in particular, initial displacement is maximum at 8cm, so it is used the cosine function:
[tex]y=a.e^{-ct}.cos(\omega.t)[/tex]
period = [tex]\frac{2.\pi}{\omega}[/tex]
12 = [tex]\frac{2.\pi}{\omega}[/tex]
ω = [tex]\frac{\pi}{6}[/tex]
Replacing values:
[tex]D(t)=8.e^{-0.4t}.cos(\frac{\pi}{6} .t)[/tex]
The equation of displacement, D(t), of a spring with damping factor is [tex]D(t)=8.e^{-0.4t}.cos(\frac{\pi}{6} .t)[/tex].