Answer:
[tex]\large \boxed{\sf subatomic \ particles}[/tex]
Explanation:
The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.
What is organic chemistry
Explanation:
Hi there!!!
The organic chemistry is a branch of chemistry which deals with the study of hydrocarbons compounds. organic chemistry deals with the study of structure, properties and reactivity of carbon compounds. It is a very broad area where more than 100000 organic compounds are studied.
Hope it helps..
Which of the following elements does not lose an electron easily? NA F MG AL
Answer:
F
EXPLANATION
Among the given elements fluorine(F)can not lose electrons easily because of its high electron affinity, high nuclear charge and high electronegativity.
Answer:
F
Explanation:
it won't lose electron , rather it would gain electron to complete its octate......
Electronic Configuration of F = 2,7
So F will gain 1 electron ....
A 25.0 mL sample of a solution of an unknown compound is titrated with a 0.115 M NaOH solution. The titration curve above was obtained with pH at equivalence point of around 8. The unknown compound is ________.
Answer:
Weak acid
Explanation:
A titration curve is a graphical description of the change in pH of the solution in the conical flask as the reagent is added from the burette. A titration curve can be plotted for the different kinds of acid and base titrations. The volume of the titrant is always plotted as the independent variable and the pH of the solution as the dependent variable. The equivalence point is read off from the titration curve. A titration curve is very important because it shows the pH at various points during the titration.
A weak acid/strong base titration leads to an equivalence point above 7. From the question, we were told that the pH at equivalence point lies around 8. Hence the unknown substance must be a weak acid.
What mass of oxygen gas contains the same number of moles as 56g of sulphur? (Relative atomic mass: S = 32, O = 16) A) 0.56g B)5.6g C)56g D)560g
Answer:
The answer is option C
Explanation:
To calculate the mass of oxygen gas we must first find the number of moles of sulphur
Molar mass = number of moles (n) / mass
n = mass / Molar mass
From the question
Molar mass (M) of Sulphur = 32g/mol
mass = 56g
n( Sulphur) = 56/32 = 1.75mol
Since the moles of oxygen and sulphur are the same
M(O2) = 16 × 2 = 32g/mol
Mass of oxygen = molar mass × moles
= 32 × 1.75
= 56gHope this helps you
unknown substance is heated from 10 celsius to 25 celsius, what happens at 17 Celsius
At 17 celsius ❤️
it will start to boil ❤️
#indian❤️
what is a conjugate acid
THE conjugate acid, within the acid–base theory, is a chemical compound formed by the reception of a proton by a base—in other words, it is a base with a hydrogen ion added to it, as in the reverse reaction it loses a hydrogen ION.
Matter is composed of exceedingly small particles called atoms. An atom is the
smallest unit of an element that can participate in a -------
Answer:
Matter is composed of exceedingly small particles called atoms. An atom is the
smallest unit of an element that can participate in a chemical reaction.
Answer:
Chemical reaction.
Explanation:
Si el elemento "X" tiene 8 protones y el elemento "Y" tiene 11 protones, al reaccionar ¿Qué tipo de enlace pueden formar? Seleccione una: a. Metálico. b. Covalente puro. c. Covalente polar. d. Iónico.
Answer:
D; Iónico
Explanation:
El elemento con 8 protones es oxígeno, mientras que el elemento con 11 protones es sodio.
El sodio es un metal alcalinotérreo, mientras que el oxígeno no es un metal.
En general, cuando tenemos un elemento metálico como el sodio, que se une con uno no metálico como el oxígeno, el tipo de enlace formado como resultado de la transferencia completa de electrones desde la capa de valencia del sodio a la capa de valencia del oxígeno para completar su propia configuración de octeto se denomina enlace electrovalente o, más generalmente, enlace iónico
Select the correct answer.
What is the reason for heat transfer from one substance to another
Answer:
Difference in temperature.
Explanation:
Conduction is the movement of heat energy through a substance or from one substance to another by direct contact of atoms and molecules. Heat moves directly from one molecule to another. The heat energy speeds up the movement of the atoms and they collide with other molecules setting them into faster motion.
Na-23 has 12 neutrons. What is it’s atomic number?
Answer:
11 Protons
Explanation:
Na-23 shows the mass of the element as 23. Therefore subtract 12 neutrons from the mass to get # of protons which is = to atomic #.
The atomic number of 23-Na is 11. It can be calculated from the number of protons present in the nucleus of an atom.
The atomic number is a fundamental property of an element and represents the number of protons found in the nucleus of an atom. It uniquely identifies each element on the periodic table. In a neutral atom, the atomic number also indicates the number of electrons present in the atom, as the number of protons and electrons in an atom are equal.
For example, hydrogen has an atomic number of 1, indicating that it has one proton in its nucleus. Oxygen has an atomic number of 8, indicating that it has eight protons in its nucleus.
The atomic number determines the element's position in the periodic table and provides important information about its properties and behavior.
Learn more about Atomic number, here:
https://brainly.com/question/16858932
#SPJ6
For a system, H2(g) + I2(g) ⇌ 2 HI(g), Kc = 62.9 at 750 K. 2.80 moles of HI were placed in a 10.0-liter container, brought up to 750 K, and allowed to come to equilibrium. Which situation described below is true, at equilibrium?
a. [HI] = 2 × [H2]
b. [HI] = [H2]
c. [HI] < [H2]
d. [HI] > [H2]
e. [H2] > [I2]
Answer:
d. [HI] > [H2]
Explanation:
The explanation at equilibrium is shown below:-
Data provided [tex]H_2(g) + I(g) \rightleftharpoons 2HI_(g)[/tex]
Initial concentration - - [tex]\frac{2.80}{10}[/tex] = 0.280 M
At equilibrium x x 0.280 - 2x
[tex]K_c = \frac{(HI)^2}{(H_2)(I_2)} = 62.9[/tex]
[tex]= \frac{(0.280 - 2x)^2}{x^2} = 62.9\\\\4x^2 - 1.12x + 0.0784 = 62.9x^2[/tex]
After solve the above equation we will get
x = 0.0282 M
Therefore at equilibrium
[tex][H_2] = [I_2] = x = 0.0282M\\\\[/tex]
[tex][HI] = 0.280 - 2x = 0.2236 M[/tex]
Hence, the correct option is d.
pls help...
You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. What step do you need to take next? A. Add ethanol B. Add restriction enzymes C. Add minisatellites D. Add radioactive probes
Add minisatellites. Hence, option C is correct.
What is Electrophoresis?Electrophoresis is a laboratory technique used to separate DNA, RNA or protein molecules based on their size and electrical charge.
You are a forensic scientist working on a murder case. You have taken the blood sample from the crime scene and put it through Electrophoresis and Southern blotting. you need to add minisatellites.
Hence, option C is correct.
Learn more about Electrophoresis here:
https://brainly.com/question/13949940
#SPJ2
Give one reason why water gas and producer gas are prepared together in the same furnace. Pls ansa its urgent
Answer:
because water gas has high heat content more than producer gas
Explanation:
give brainliest plz
A container initially holds 5.67 x 10^-2 mol of propane and has a volume of V1. The volume of the container was increased by adding an additional 2.95 x 10^-2 mol if propane to the container, so that the container has a final volume of 1.93 L. If the temperature and pressure are constant, what was the initial volume of the container?
Answer:
Initial volume of the container (V1) = 1.27 L (Approx)
Explanation:
Given:
Number of mol (n1) = 5.67 x 10⁻²
Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²
New volume (V2) = 1.93 L
Find:
Initial volume of the container (V1)
Computation:
Using Avogadro's law
V1 / n1 = V2 / n2
V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²
V1 = 10.9431 / 8.62
Initial volume of the container (V1) = 1.2695
Initial volume of the container (V1) = 1.27 L (Approx)
Answer: 1.27 L
Explanation:
First, calculate the final number of moles of propane (n2) in the container.
n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol
Rearrange Avogadro's law to solve for V1.
V1 = V2 × n1 / n2
Substitute the known values of n1, n2, and V2,
V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L
How many significant figures are there in 6.07x10^-15?
Answer:
3
Explanation:
6.07 has 3 digits and all are significant
how to make a salt by neutralization reaction
Answer:
Acid+Base=Salt+water
This is the formula of neutralization reaction.
According to this formula you can make salts by reacting an acid with a base.
Hope this helps ❤❤❤.
How many atoms are in 10g of Al
Answer:
2.22 x 10²³
Explanation:
number of atoms = mole x 6 x 10²³first we have to find number of moles
moles = mass(g) / molar mass (Mr) (g/mol)mol = 10/27
mol= 0.37 mol
Now,
number of atoms = mole x 6 x 10²³
= 0.37 x 6 x 10²³
= 2.22 x 10²³
Which event is most likely occurring? diffusion because particles move from regions of high concentration to regions of low concentration diffusion because particles move from regions of low concentration to regions of high concentration effusion because there is a movement of a gas through a small opening into a larger volume effusion because there is a movement of a gas through a large opening into a smaller volume
Answer: c
Explanation: effusion because there is a movement of a gas through a small opening into a larger volume
Based on my previous question I have posted.. Answer this.. It's the continuation
Table 7.3 is different
Answer:
We don't know what solvent X and solvent Y are, but from the chart, we can see that in solvent X, hydrochloric acid can conduct electricity (bulb lights up), and react with calcium carbonate.
So, we can say the electrical conductivity when HCl is dissolved in solvent X is high, and when HCl is dissolved in solvent Y, the electrical conductivity is low (because light bulb doesn't light up).
Additionally, in solvent X, HCl ionizes, this shows the property of acids: reacts with carbonates to give CO2 (because CO2 reacts with lime water to make it cloudy).
In solvent Y, HCl does not ionize, so there is no reaction between acid and calcium carbonate.
1. The atomic symbol of aluminum is written as 2713Al. What information do you get from it?
Answer:
its mass number and atomic number
Explanation:
atlmic number(subscript)=13
mass number(superscript)=27
A 35 L tank of oxygen is at 42°C with an internal pressure of 5000.mmHg. If the temperature changes to 88°C, what would the new pressure be ? the volume is held constant
Answer:
5730 mmHg.
Explanation:
The following data were obtained from the question:
Initial temperature (T1) = 42 °C.
Initial pressure (P1) = 5000 mmHg.
Final temperature (T2) = 88 °C.
Final pressure (P2) =.?
Next we shall convert celsius temperature,T(°C) to Kelvin temperature, T(K).
This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T1) = 42 °C.
Initial temperature (T1) = 42 °C + 273 = 315 K
Final temperature (T2) = 88 °C.
Final temperature (T2) = 88 °C + 273 = 361 K
Finally, we shall determine the new pressure.
Since the volume of the container is constant, the new pressure can be obtained as follow:
Initial temperature (T1) = 315 K.
Initial pressure (P1) = 5000 mmHg.
Final temperature (T2) = 361 K.
Final pressure (P2) =.?
P1/T1 = P2/T2
5000/315 = P2/361
Cross multiply
315 x P2 = 5000 x 361
Divide both side by 315
P2 = (5000 x 361) / 315
P2 = 5730.1 ≈ 5730 mmHg
Therefore, the new pressure is 5730 mmHg.
A student has a piece of aluminum metal what is the most reasonable assumption a student can make about the metal
Answer:
- It could be stretched into a thin wire.Explanation:
As per the question, the most rational claim that the student can make about the aluminum metal is that 'it could be stretched into a thin wire' without breaking which shows its ductility. It is one of the most significant characteristics of a metal. Metals can conduct electricity in any state and not only when melted. Thus, option A is wrong. Options C and D are incorrect as metals neither have the same shape always nor do they break on hitting with a hammer. Therefore, option E is the correct answer.
Answer:
Yes, the other person is correct; the answer is E. It could be stretched into a thin wire.
Explanation:
Here is why it is NOT B:
"A briskly burning wood fire is plenty hot enough to melt aluminum. If it's just smoldering (like a lot of campfires) it won't create enough heat to melt aluminum."
Therefore, CAMPFIRES are not likely to melt aluminum if it is thrown in. Aluminum's melting point is 1,221 ° F. Typical campfires are about 900 ° F.
You're Welcome
~Kicho [nm68]
The reaction between hydrogen gas and chlorine gas produces hydrogen chloride according to the following equation: H2(g) + Cl2(g) → 2HCl(g). Using the following bond enthalpies(D) calculate the enthalpy of reaction. D(H-H) =436 kJ/mol; D(Cl-Cl) = 243 kJ/mol D(H-Cl) = 432 kJ/mol
Answer:
The enthalpy of reaction is -185 kJ
Explanation:
To get the reaction:
H₂(g) + Cl₂(g) → 2 HCl(g)
you must follow the following steps:
1) Reactive molecules must break their bonds to obtain their atoms.
H₂(g) → 2 H(g)
Cl₂(g) → 2 Cl(g)
Bond energy (or enthalpy) is the energy required to break one mole of bonds of a gaseous substance. In the case of diatomic molecules with a single bond, it corresponds to the energy necessary to dissociate 1 mole of said substance in the atoms that form it.
Whenever you want to break links you must supply energy, so the link enthalpy will have positive values; while when a mole of bonds is formed energy is released and the bond enthalpy of this process will be negative.
In this case you will then have:
H₂(g) → 2 H(g) ΔH=436 kJ/mol
Cl₂(g) → 2 Cl(g) ΔH=243 kJ/mol
So the total energy needed to break all the bonds is:
ΔH=1 mol*436 kJ/mol +1 mol* 243 kJ/mol= 679 kJ
2) The atoms that were obtained in the break of the bonds must be combined to obtain the product.
2 H (g) + 2 Cl (g) → 2 HCl (g)
Being the single bond energy for one mole of 431 kJ H-Cl bonds and considering that two moles of H-Cl bonds are formed, the ΔH is:
ΔH = -2 moles* (432 kJ/mol) = -864 kJ
As mentioned, when a mole of bonds is formed energy is released, the bond enthalpy of this process will be negative. So the formation of HCl is negative.
Hess's law states that the energy change in an overall chemical reaction is equal to the sum of the energy changes in the individual reactions comprising it. So:
ΔHtotal= -864 kJ + 679 kJ
ΔHtotal= -185 kJ
The enthalpy of reaction is -185 kJ
When lithium metal reacts with fluorine gas it forms the ionic compound lithium fluoride (LiF). What is the correct electron configurations of the ions formed
Answer:
The electronic configuration of ions formed are:
Li+ (2) => 1s2
Cl- (18) => 1s2 2s2 2p6 3s2 3p6
Explanation:
Lithium metal, Li will lose 1 electron to lithium ion Li+. Chlorine atom, Cl will receive the 1 electron to form the chloride ion Cl- as shown by the following equation below:
Li —> Li+ + e
Cl+ e —> Cl-
Combine both equation
Li + Cl + e —> Li+ + Cl- + e
Cancel out 'e'
Li + Cl —> Li+ Cl-
Thus, we can write the electronic configuration for the reaction as follow:
Before reaction:
Li (3) => 1s2 2s1
Cl (17) => 1s2 2s2 2p6 3s2 3p5
After reaction
Li+ (2) => 1s2
Cl- (18) => 1s2 2s2 2p6 3s2 3p6
Therefore, the electronic configuration of the ions formed are:
Li+ (2) => 1s2
Cl- (18) => 1s2 2s2 2p6 3s2 3p6
what is the difference between the atom and isotope
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons.
Isotopes are atoms that have same number of protons but they differ in the number of neutrons and in atomic mass.
Answer:
Isotopes are atoms that have the same numbers of protons but different numbers of neutrons. An ion is an atom that has gained or lost electrons, so it now has more or fewer electrons than it does protons. So an ion has a negative or positive charge.
Hope it helps :)
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change
that must happen at the molecular level?
ОООО
The molecules move more quickly and their average kinetic energy increases.
The molecules move more slowly and their average kinetic energy decreases.
The molecules move more quickly and their average kinetic energy decreases.
The molecules move more slowly and their average kinetic energy increases.
Answer:
The molecules move more slowly and their average kinetic energy decreases
Explanation:
The increased temperature meant that the atoms in liquid had a greater average energy of motion so as the temperature decreases the reaction would be inverse.
The branch of science which deals with the chemicals bond is called chemistry.
The correct option is B.
The energy which is produced by the motion of the particles is called kinetic energy. Temperature increases the motion of the particles. So, the kinetic energy increases when the temperature rises.
According to the question, the temperature of the water decreases therefore the kinetic energy decreases.
Hence, the correct option is B that is the molecules move more slowly and their average kinetic energy decreases.
For more information, refer to the link:-
https://brainly.com/question/25026730
A. If both Assertion & Reason are true and the reason is the correct explanation of the assertion. B. If both Assertion & Reason are true but the reason is not the correct explanation of the assertion. C. If Assertion is true statement but Reason is false. D. If Assertion is false and Reason is true Assertion: .Formation of soluble products from insoluble ones is called precipitation. Reason : Precipitation involves formation of insoluble products from soluble ones
Answer:
D- Assertion is false and Reason is true
Explanation:
Precipitation is said to have occurred when an insoluble product is formed from soluble ones. Let us take an instance;
BaCl2(aq) + H2SO4(aq) -------> BaSO4(s) + 2HCl(aq)
The barium sulphate so formed is an insoluble product obtained from the reaction of soluble barium chloride and sulphuric acid. This is a typical example of a double replacement reaction as the both ions exchanged partners.
Thus, the assertion is false but the reason is true.
Explain why all glassware must be dry and the solvent anhydrous during formation and reaction of a Grignard reaction. Explain why it is advisable to not clean your glassware with acetone before a Grignard reaction. Include balanced chemical equations in your answer. (4 pts)
Answer:
The Grignard reagent will be destroyed
Explanation:
The Grignard reaction is based on a carbanion production (RMgX). If water is present in the glassware, a reaction can take place with [tex]H_2O[/tex] and the desired product will not be produced. Because an "H" would be transferred from water to the Grignard reagent. (See figure 1)
If we have acetone in the glassware we will have a similar problem. The Grignard reagent would be destroyed and the desired product will not be produced. The Grignard reagent will attack the carbon in the carbonyl group and the carbanion would disappear. (See figure 2)
what is the relationship between ph and poh?
Answer:
pH and pOH denote the negative log of the concentration of hydrogen or hydroxide ions. High pH means that a solution is basic while high pOH means that a solution is acidic. ... So here the basic definition of pH is that it's equal to negative log base 10 of the concentration of protons in your solution.
pH and pOH are inversely proportional to one another i.e. as one increases, the other decreases and vice versa.
What is pH and pOH?pH and pOH are terms used to measure the level of acidity or alkalinity of a substance.
A basic solution has a pOH less than 7, while an acidic solution has a pOH greater than 7.
On the other hand, a basic solution has a pH greater than 7 while an acidic solution has a pH lesser than 7.
Therefore, it can be said that pH and pOH are related inversely i.e. as one decreases, the other increases.
Learn more about pH at: https://brainly.com/question/15289741
#SPJ9
The volume of a sample of pure HCl gas was 221 mL at 20°C and 111 mmHg. It was completely dissolved in about 50 mL of water and titrated with an NaOH solution; 18.7 mL of the NaOH solution was required to neutralize the HCl. Calculate the molarity of the NaOH solution.
Answer:
[tex]molarity =6.9\times 10^{-3}\ M\\[/tex]
Explanation:
We know that , the reaction of HCl and NaOH is given as follows
[tex]NaOH+HCl=NaCl +H_2O[/tex]
Given that
Pressure = 111 mm Hg
[tex]P=111\times 13.6\times 10^{-3}\times 9.81\times 1000=14.809\ kPa[/tex]
Temperature = 20°C
T=20+273=293 K
Volume= 221 m L
V=0.221 L
Number of moles of HCl is given as follows
[tex]n=\dfrac{P\times V}{R\times T}\\n=\dfrac{0.148\times 0.221}{0.821\times 293}=1.3\times 10^{-4}\ moles[/tex]
From the above reaction we can say that
Number of moles of HCl=Number of moles of NaOH
Volume of NaoH is given as follows
V=18.7 = 0.0187 L
Therefore molarity
[tex]molarity =\dfrac{n}{V_{NaOH}}\\molarity =\dfrac{1.3\times 10^{-4}}{0.0187}=6.9\times 10^{-3}\ M\\molarity =6.9\times 10^{-3}\ M\\[/tex]