true or false. the plane that contains the earth's orbit around the sun is also called the plane of the ecliptic. when you look for the planets in the sky, you expect to find

Answers

Answer 1

True. The ecliptic plane is the plane that contains the Earth's orbit around the Sun. As they roughly orbit the Sun in the same plane, planets should be found close to the ecliptic while looking for them in the sky.

The apparent path of the Sun across the sky over the course of a year, as seen from Earth, is known as the ecliptic. The orbit of the Earth around the Sun is also contained inside this plane. The other planets in our solar system are similarly visible close to the ecliptic because they orbit the Sun in a similar general plane. The inclination of the planets' orbits and the Earth's rotation around the Sun, however, cause the positions of the planets with respect to the ecliptic to change throughout time.

learn more about planets here:

https://brainly.com/question/14581221

#SPJ11


Related Questions

A book sitting on a desk with the surface area of the cover of .05 m^2. The atmospheric pressure is 100kPa. What is the downward force of the atmosphere on the book?

Answers

The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.

What is atmospheric pressure?

Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).

Force = Pressure x Area

Where:

Pressure = 100 kPa (given)

Area = 0.05 m² (given)

Substituting the given values, we get:

Force = 100 kPa x 0.05 m²

Force = 5 N

Therefore, the downward force of the atmosphere on the book is 5 N.

To know more about atmospheric pressure, visit:

https://brainly.com/question/30166820

#SPJ1

what is an expression for x1(t) , the position of mass i as a function of time? assume that the position is measured in meters and time is measured in seconds.

Answers

The expression for x1(t) , the position of mass i as a function of time, is x1(t) = x1_0 + v1_0 * t + 0.5 * a1 * t²

To find an expression for x1(t), the position of mass 1 as a function of time, we need to consider the following terms:

1. Initial position (x1_0): The position of mass 1 at time t=0.
2. Initial velocity (v1_0): The velocity of mass 1 at time t=0.
3. Acceleration (a1): The constant acceleration acting on mass 1, if applicable.

Now, we can use the general equation for the position of an object as a function of time:

x1(t) = x1_0 + v1_0 * t + 0.5 * a1 * t²

Where x1(t) is the position of mass 1 at time t, x1_0 is the initial position, v1_0 is the initial velocity, a1 is the acceleration, and t is the time in seconds.

More on position/time: https://brainly.com/question/29154471

#SPJ11

thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in

Answers

Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.

When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.

It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.

Learn more about equipment ,

https://brainly.com/question/30230359

#SPJ4

How does energy in the food chain flow to an omnivore such as a fox?


A) The fox is a plant eater and receives energy directly from plants.



B) The fox receives energy directly from the sun and the plants it eats.


C) When the fox eats an animal that eats plants, it receives energy directly from the sun.



D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.

Answers

The correct answer is option D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.

How does energy flow in a food chain?

Energy in a food chain flows from the sun, to the producers (plants), to the primary consumers (herbivores), to the secondary consumers (carnivores), and so on. Omnivores, such as foxes, consume both plants and animals, but they typically obtain more of their energy from consuming other animals.

When a fox eats an animal that eats plants, it is receiving energy indirectly from the sun. The plants that the prey animal consumed converted the energy from the sun into organic molecules through the process of photosynthesis. The prey animal then consumed those plants and converted the organic molecules into its own tissues. When the fox eats the prey animal, it is obtaining the energy stored in the prey's tissues.

Learn more about the food chain here:

https://brainly.com/question/7564953

#SPJ1

suppose the horns of all cars emitted sound at the same pitch or frequency. what would be the change in the frequency of the horn of a car moving toward ou? away from you?

Answers

The frequency of the horn of a car moving towards you would increase, while the frequency of a car moving away from you would decrease due to the Doppler effect.

The frequency of the sound waves an automobile makes will rise as it approaches you. This is due to the sound waves compression as the automobile draws closer to you, which causes them to have a shorter wavelength and a higher frequency. The Doppler effect is the name for this rise in frequency.

On the other hand, when an automobile pulls away from you, the sound waves' frequency will drop because they stretch, leading to a longer wavelength and a lower frequency. As a result, if all vehicles produce sound at the same frequency, you would hear a frequency rise for a vehicle travelling in your direction and a frequency drop for a vehicle driving away from you.

Learn more about the Doppler effect:

https://brainly.com/question/12764207

#SPJ4

If the car is moving towards you, the frequency of the horn will increase,moving away from you, the frequency will decrease

If the horns of all cars emitted sound at the same pitch or frequency, the frequency of the horn of a car moving toward you would appear to increase, as the sound waves are compressed and the wavelength is shortened due to the Doppler effect. Conversely, the frequency of the horn of a car moving away from you would appear to decrease, as the sound waves are stretched and the wavelength is lengthened due to the Doppler effect. This is because the observer perceives a higher frequency when the source is approaching and a lower frequency when the source is moving away.

To learn more about the doppler effect, click on this -

brainly.com/question/15318474

#SPJ11

The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.

Answers

C option is correct one

a scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called a(n)

Answers

The scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called an ordinal scale.

An ordinal scale is used in research to measure the rank order of items or attributes, where the differences between them cannot be precisely quantified. The responses are ordered based on their perceived magnitude, but the actual distance between them is unknown.

Ordinal scales can be analyzed using non-parametric statistical tests such as the chi-square test or the Mann-Whitney U test, which do not assume that the data is normally distributed or that the intervals between responses are equal.

To learn more about magnitude follow the link:

https://brainly.com/question/14452091

#SPJ4

The complete question is:

A scale that allows a respondent to express relative magnitude between the answers to a question and arranges responses in a hierarchical pattern, but does not allow researchers to determine absolute difference between responses, is called a(n) ____________

on the centered zipper, what is the only part of the work that is done on the outside of the garment?

Answers

The only part of the work that is done on the outside of the garment is the basting or pinning of the zipper tape to the fabric.

The rest of the work is done on the inside of the garment. The zipper teeth are inserted between the layers of the fabric and the seam is sewn in place. The seam is then pressed open and the zipper is opened up to expose the teeth.

The zipper tape is then folded back and stitched in place, creating a clean finish on the inside of the garment. The final step is to topstitch the zipper on the outside of the garment, which reinforces the zipper and adds a decorative touch.

Overall, the centered zipper is a popular and versatile choice for many types of garments and can be easily customized to suit individual preferences.

To learn more about : garment

https://brainly.com/question/28264851

#SPJ11

Show that the form of Newton’s second law is invariant under the Galilean transformation. According to Newton’s second law, the net force acting on an object is equal to the product of its mass and acceleration. Newton’s second law of motion is given by following expression:

Answers

Newton’s second law of motion states that the force F acting on an object of mass m produces an acceleration a in the object, and is given by, F = ma. The law s invariant under Galilean transformation.

The Galilean transformation is a set of equations that describe the relationship between two reference frames that are in relative motion with constant velocity. It has no effect on the form of Newton’s second law because it only involves a change of coordinates and time, which do not affect the physical laws.

To see this, consider two reference frames S and S', where S' moves with constant velocity v with respect to S. Let an object of mass m be at rest in S, and let F be the net force acting on it in S. According to Newton’s second law in S, we have:

F = ma

Now, let us apply the Galilean transformation to the equation. The position of the object in S' is given by:

x' = x - vt

where x is the position of the object in S, and t is time. Taking the derivative of x' with respect to t, we get:

v' = dx'/dt

= dx/dt - v

= v - v

= 0

This means that the velocity of the object is the same in both reference frames. Similarly, the acceleration is also the same in both reference frames, since it is the derivative of velocity,

a' = dv'/dt = da/dt = a

Therefore, we can write Newton’s second law in S' as,

F' = ma'

where F' is the net force acting on the object in S'. Substituting a' = a, we get:

F' = ma

which is the same form as in S. Thus, we see that the form of Newton’s second law is invariant under the Galilean transformation.

To know more about Galilean transformation, here

brainly.com/question/29655824

#SPJ4

What happens when thermal energy is applied to a substance q

Answers

When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.

What happens when thermal energy is applies to a substance

As a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.

The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.

If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.  

Learn more about thermal energy  at

https://brainly.com/question/19666326

#SPJ1

question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?

Answers

The differences between ambient sounds, sound effects, and Foley sounds.

Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.

Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.

In summary:

1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.

To know more about ambient sounds, sound effects, and Foley sounds:

https://brainly.com/question/16519187

#SPJ11

if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?

Answers

Answer:

V = λ * ν       speed of wave in medium

We know the speed of a particular wave in a medium is constant.

ν = V / λ

If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.

ν' = ν / 3

the geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of

Answers

The geocentric model of the universe that was widely accepted in scientific and religious circles until the 16th century was that of Ptolemy, also known as the Ptolemaic system.

The geocentric model of the universe, widely accepted in scientific and religious circles until the 16th century, was based on the idea that Earth was at the center of the cosmos.

This model, also known as the Ptolemaic system, was developed by the ancient Greek astronomer Claudius Ptolemy in the 2nd century AD. According to this model, all celestial objects, including the Sun, Moon, and stars, revolved around the Earth in circular or epicyclical paths.

The geocentric model was dominant for over a thousand years due to its alignment with religious beliefs and its ability to explain astronomical observations.

However, the 16th-century work of Nicolaus Copernicus and later astronomers led to the acceptance of the heliocentric model, which placed the Sun at the center of the solar system and was a more accurate representation of the cosmos.

To learn more about : geocentric

https://brainly.com/question/1507151

#SPJ11

is it ok to keep my ac running and just stop the car's engine to save gas and keep cool while waiting for my husband?

Answers

It is not recommended to keep the AC running while the engine is off, as this can drain the car battery and may lead to mechanical issues in the long run. It is better to turn off the AC and open the windows or step out of the car to cool off while waiting for your husband.

Idling the engine for extended periods of time can also waste gas and contribute to air pollution. When you stop your car's engine, the air conditioning (AC) system will also stop working, as it requires the engine to be running to function properly. To save gas and keep cool while waiting for your husband, you may consider:

1. Turn off your car's engine to save gas.
2. Open the windows slightly to allow for airflow.
3. Use a portable battery-operated fan to keep yourself cool.
4. Park your car in a shaded area, if possible, to reduce heat buildup inside the vehicle.
5. Wear light, breathable clothing to stay comfortable in warmer temperatures.

Remember that running the AC without the engine is not possible, so it's essential to find alternative ways to stay cool while conserving fuel.

More on car engine: https://brainly.com/question/29980491

#SPJ11

the electric motor of a model train accelerates the train from rest to 0.720m/s in 22.0milliseconds (ms). the total mass of the train is 875g. Find the average power delivered to the train during its acceleration.

Answers

To find the average power delivered to the train during its acceleration, we need to use the formula:
Power = Work / Time

First, we need to find the work done on the train during its acceleration. We can use the formula:
Work = Force x distance

The force on the train is equal to its mass times its acceleration:
Force = Mass x Acceleration

Using the given values, we get:
Force = 0.875 kg x (0.720 m/s^2) = 0.63 N

The distance the train travels during its acceleration can be found using the formula:
Distance = (1/2) x Acceleration x Time^2

Plugging in the given values, we get:
Distance = (1/2) x 0.720 m/s^2 x (22.0 x 10^-3 s)^2 = 0.17 m

So the work done on the train during its acceleration is:
Work = 0.63 N x 0.17 m = 0.1071 J

Now we can plug this value into the formula for power:
Power = Work / Time

The time given is 22.0 milliseconds, which is 0.0220 seconds:
Power = 0.1071 J / 0.0220 s = 4.87 W

Therefore, the average power delivered to the train during its acceleration is 4.87 watts.

To know more about acceleration :

https://brainly.com/question/29135987

#SPJ11

after the train passed, the pitch of the train whistle became lower. this change in sound would be represented by what change in the diagram below?

Answers

The change in sound of the train whistle from a higher pitch to a lower pitch after the train passes can be explained by the Doppler Effect.

Here is a step-by-step explanation:

1) The Doppler Effect is the change in frequency or pitch of a sound wave due to the relative motion of the sound source and the observer.

2) When the train is approaching the observer, the sound waves from the train are compressed and the frequency or pitch of the sound wave appears higher.

3) As the train passes the observer, the sound waves from the train are stretched and the frequency or pitch of the sound wave appears lower.

4) This change in frequency or pitch can be explained by the relative motion of the train and the observer.

When the train is approaching the observer, the sound waves from the train are "bunched up" and appear closer together, resulting in a higher frequency or pitch.

When the train is moving away from the observer, the sound waves are "stretched out" and appear further apart, resulting in a lower frequency or pitch.

5) The change in frequency or pitch of the train whistle can be represented by a graph showing the frequency of the sound wave over time.

Before the train passes, the frequency of the sound wave gradually increases as the train approaches the observer.

After the train passes, the frequency of the sound wave gradually decreases as the train moves away from the observer.

6) The change in frequency or pitch of the train whistle can also be calculated using the Doppler Effect equation, which relates the frequency of the sound wave, the speed of the sound wave, and the relative velocity of the train and the observer.

In summary, the change in sound of the train whistle from a higher pitch to a lower pitch after the train passes is due to the Doppler Effect, which is caused by the relative motion of the train and the observer.

The change in frequency or pitch can be represented by a graph or calculated using the Doppler Effect equation.

To know more about Doppler Effect :

https://brainly.com/question/15318474

#SPJ11

i need some help with this physics question

Answers

The response is C. It has bulk and occupies room. All substance has a volume and takes up space, whether it be a solid, liquid, or gas. It is a basic characteristic of matter. While matter can move from hot to cold and perform work.

What are two unbreakable qualities?

A metal-skinned hull, steam propulsion, and a main armament of guns equipped to fire explosive shells are the three qualities that define a fighting ironclad. All of these innovations reached their full maturity with the French Navy's November 24, 1859, launch of the "Gloire," but the US Civil War saw the invention of the ironclad.

What are the qualities of matter's properties?

Any attribute that may be measured, such as a substance's mass, volume, length, density, colour, malleability, or melting point Properties of matter include point, hardness, smell, temperature, and more.

To know more matter visit:-

https://brainly.com/question/14987556

#SPJ1

Answer: D

Explanation:

thinking back to chapter 8, a tidal wave is which wave type?

Answers

A tidal wave is a type of wave known as a "tidal bore," also called a "seiche."

Tidal bores occur when the rising tide creates a wall of water that moves up a river or narrow bay against the direction of the river or bay's flow.

This occurs due to the gravitational forces of the Moon and Sun, which cause the ocean's water level to rise and fall in a regular cycle of tides.

As the high tide crests at the mouth of the river or bay, a surge of water propagates upstream and collides with the lower water level.

The interaction between the two bodies of water generates a large, powerful wave that moves upstream.

The height and speed of the tidal bore depend on the shape and depth of the river or bay, as well as the astronomical tide cycle.

Tidal waves can be dangerous, as they can cause damage to boats, structures, and ecosystems along the river or bay.

Some tidal bores can reach heights of up to several meters and travel at speeds of up to 30 km/h (18.6 mph), creating dangerous conditions for those caught in their path.

Despite their destructive potential, tidal bores can also be an attraction for surfers and thrill-seekers who ride the waves on specialized boards or boats.

Tidal bore surfing has become a popular sport in some parts of the world, such as the Qiantang River in China and the Amazon River in Brazil.

To know more about tidal wave visit link :

https://brainly.com/question/12604849

#SPJ11

An astronaut of mass 75 kg is floating in space holding a 20 kg fire extinguisher. If she throws the extinguisher forward at a velocity of 3.5 m/s, what will be her resulting velocity?

Answers

Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 70 kg*m/s.

What is Velocity?

Velocity is a vector quantity that measures the rate of change of an object's position. It is determined by the displacement of an object over a given period of time, and is usually expressed in terms of distance over time.

The astronaut's resulting velocity will be the same as the fire extinguisher's velocity, 3.5 m/s.
This is because the astronaut and extinguisher have the same mass and momentum must be conserved.
Momentum is defined as mass multiplied by velocity, so the total momentum before the extinguisher is thrown is 75 kg * 0 m/s + 20 kg * 3.5 m/s
= 70 kg*m/s.

To learn more about Velocity

https://brainly.com/question/626479

#SPJ1

A 52 V battery powers a pair of 36 resistance resistors connected in series. What is the current flowing through the system?

Answers

Answer:

Total Voltage V=36*2Ω = 72Ω

We can use the formula V=IR

V=voltage

I=current

R=resistance

V=IR

I= 52/72

I=13/18

I=0.722A

in a study of the photoelectric effect, a researcher shines low-intensity visible light with a wavelength of 650 nm on a sample of metal. she notices that no photoelectrons are produced. what would happen if she were to increase the intensity of the light by a factor of 10?:

Answers

Increasing the intensity of the light by a factor of 10 would increase the number of photoelectrons produced.

The photoelectric effect is a phenomenon in which electrons are emitted from a material when it absorbs electromagnetic radiation, such as light. The energy of the radiation must be greater than the work function of the material for electrons to be emitted.

Increasing the intensity of the light increases the number of photons striking the surface of the metal, which increases the likelihood of electrons being emitted. Therefore, increasing the intensity of the light by a factor of 10 would result in the emission of photoelectrons.

To learn more about photoelectrons, here

https://brainly.com/question/16772624

#SPJ4

Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.

Answers

Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.

What is Wavelength?

Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).

Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.

Learn more about Wavelength from the given link

https://brainly.com/question/10750459

#SPJ1

true or false an electric current produces a magnetic field and a magnetic field can be used generate electricity

Answers

True,
Electric current has a magnetic field around it (using the right hand grip rule)
Magnetic field can create current by cutting the magnetic field using a complete circuit (a.c. generator)

duc 1. Define the term 'element. 2. If you break down each of the following, how many different atoms would you be able to recover? a) Mercury b) Sodium chloride c) Water d) Carbon dioxide e) Oxygen​

Answers

part a.

An element is described as a pure substance that is composed of only one type of atom. Each element is characterized by a unique atomic number, which corresponds to the number of protons in the nucleus of its atoms.

part b.

a) Mercury -  breaking down mercury would yield only mercury atoms.

b) Sodium chloride -  Breaking down sodium chloride would yield sodium and chlorine atoms in their respective ratios.

c) Water -Breaking down water would yield hydrogen and oxygen atoms in their respective ratios.

d) Carbon dioxide : Breaking down carbon dioxide would yield carbon and oxygen atoms in their respective ratios.

e) Oxygen - breaking oxygen down would yield only oxygen atoms.

More about Elements?

Some facts about elements includes;

Elements found on Earth and Mars are exactly the same.Hydrogen is the most common element found in the universe. Isotopes are atoms of the same element, with different numbers of neutrons.In ancient times the elements referred to fire, earth, water, and air.

Learn more about elements at: https://brainly.com/question/20096027

#SPJ1

if an object were to suddenly shrink and decrease its moment of inertia by a factor of 3, what is the difference in energy between the final and initial rotational kinetic energies?

Answers

The difference in energy between the final and initial rotational kinetic energies is -(2/3) times the initial rotational kinetic energy.

The rotational kinetic energy of an object is given by the formula:

[tex]K_rot = \frac{1}{2} * I * w^{2}[/tex]

where K_rot is the rotational kinetic energy, I am the moment of inertia, and ω is the angular velocity.

If the moment of inertia of an object decreases by a factor of 3, then the rotational kinetic energy will decrease by a factor of 3 as well.

Let K1 be the initial rotational kinetic energy of the object, and K2 be the final rotational kinetic energy of the object. Then, we can write:

K2 = (1/3) * K1

The difference in energy between the final and initial rotational kinetic energies is:

ΔK = K2 - K1

ΔK = (1/3) * K1 - K1

ΔK = [tex]-(2/3)*k1[/tex]

To know more about rotating kinetic energy:

https://brainly.com/question/30107920

#SPJ4

look again at the visible-light view of m82. what is the source of the white and blue light that dominates the image?

Answers

In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.

The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.

To know more about ultraviolet radiation:

https://brainly.com/question/30547511

#SPJ11

at a given instant in time, an 8-kg rock that has been dropped from a high cliff, experiences an upward force of air resistance of 12 n.note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part.what is the gravitational force on the rock? use g

Answers

The gravitational force on the rock is 78.4 Newtons.


At the given instant, the 8-kg rock experiences a gravitational force which can be calculated using the formula:

F_gravity = m * g

where m is the mass of the rock (8 kg) and g is the acceleration due to gravity (approximately 9.8 m/s²).

F_gravity = 8 kg * 9.8 m/s² = 78.4 N

So, the gravitational force on the rock is 78.4 Newtons.his net force causes the rock to accelerate downwards.

The concept of gravitational force is an important one in physics, as it plays a significant role in many natural phenomena. The force of gravity is responsible for the motion of celestial bodies, and it is also a key factor in determining the weight of objects on earth.

Understanding the principles of gravitational force can help us understand the behavior of objects in motion and can also help us develop technologies that are based on these principles.

Know more about   gravitational force  here:

https://brainly.com/question/72250

#SPJ11

how much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage

Answers

The time taken is twice the time taken to decrease from the initial voltage to one-half initial voltage.

How much time will pass when it goes from one-half initial voltage to one-fourth its initial voltage?

The amount of time it takes for a voltage to decrease from one level to another depends on the characteristics of the system generating the voltage.

Assuming that the voltage is decreasing exponentially over time, the time it takes for a voltage to decrease from one level to another can be calculated using the formula:

[tex]t = -(ln(Vf/Vi))/λ[/tex]

where t is the time taken, Vi is the initial voltage, Vf is the final voltage, and λ is the decay constant of the system generating the voltage.

If the voltage decreases from one-half its initial voltage to one-fourth its initial voltage, then [tex]Vi = 1, Vf = 1/4[/tex], and the voltage has decreased by a factor of 2.

Assuming that the decay is exponential, the time it takes to decrease by a factor of 2 is:

[tex]t = -(ln(1/2))/λ[/tex]

We can simplify this expression using the fact that [tex]ln(1/2) = -ln(2)[/tex], which gives:

[tex]t = ln(2)/λ[/tex]

Similarly, the time it takes to decrease by a factor of 4 is:

[tex]t = -(ln(1/4))/λ = ln(4)/λ = 2ln(2)/λ[/tex]

So, the ratio of the time taken to decrease from one-half initial voltage to one-fourth initial voltage is:

[tex]t(1/4) / t(1/2) = (2ln(2)/λ) / (ln(2)/λ) = 2[/tex]

Therefore, the time taken to decrease from one-half initial voltage to one-fourth initial voltage is twice the time taken to decrease from the initial voltage to one-half initial voltage.

Learn more about voltage

brainly.com/question/29445057

#SPJ11

at what speed, in m/s , would a moving clock lose 2.7 ns in 1.0 day according to experimenters on the ground? hint: use the binomial approximation.

Answers

The clock must be moving at a velocity of approximately 4.53 m/s relative to the observers on the ground in order to experience a time dilation of 2.7 ns over the course of one day.

According to Einstein's theory of relativity, time dilation occurs when an object moves at a constant velocity relative to an observer. This means that time appears to pass more slowly for an object in motion than for an observer at rest. The amount of time dilation depends on the relative velocity between the two objects.

In this problem, we are given that a clock moving at some velocity loses 2.7 nanoseconds (ns) over the course of one day, as measured by observers on the ground. We want to determine the velocity of the clock.

We can use the formula for time dilation, which states that the observed time interval (Δt') is related to the proper time interval (Δt) by:

[tex]$\Delta t' = \frac{\Delta t}{\sqrt{1 - \frac{v^2}{c^2}}}$[/tex]

where v is the velocity of the clock, c is the speed of light, and the square root is taken using the binomial approximation (since v << c).

We know that Δt' = Δt - 2.7 ns and Δt = 1 day = 86400 seconds. Substituting these values and simplifying, we get:

[tex]$86400 - 2.7 = \frac{86400}{\sqrt{1 - \frac{v^2}{c^2}}}$[/tex]

Squaring both sides and rearranging, we can solve for v:

[tex]$v = c \sqrt{1 - \left(\frac{2.7}{86400}\right)^2} \approx 4.53 \text{ m/s}$[/tex]

To learn more about Einstein's theory

https://brainly.com/question/1098431

#SPJ4

the speed of sound in air is 332 m/s. humans have sensitivity to sound frequencies from 20 hz to 20,000 hz. a. what is the longest sound wavelength we can hear? (5 pts) b. what is the shortest sound wavelength we can hear? (5 pts)

Answers

The longest sound wavelength we can hear is 16.6 m while  the shortest sound wavelength we can hear is 0.0166 m.

We can use the formula for the speed of sound to find the longest and shortest sound wavelengths humans can hear:

speed of sound = frequency × wavelength

Let's first solve for the longest wavelength (a):

a. Longest wavelength = speed of sound / lowest frequency
Longest wavelength = 332 m/s / 20 Hz
Longest wavelength = 16.6 m

Now, let's solve for the shortest wavelength (b):

b. Shortest wavelength = speed of sound / highest frequency
Shortest wavelength = 332 m/s / 20,000 Hz
Shortest wavelength = 0.0166 m (or 1.66 cm)

So, the longest sound wavelength humans can hear is 16.6 meters and the shortest sound wavelength we can hear is 0.0166 meters (1.66 centimeters).

More on wavelength: https://brainly.com/question/9668457

#SPJ11

Other Questions
Ms. Anh maintains a savings deposit with VCB Ha Thanh branch. This past year Anh received 10.75 million VND in interest earnings from her savings account. Her savings deposit had the following average balance each month: (in million VND) January 40 July 351 February 25 August 42.51 March 30 September 55 April 15 October 601 May 22.5|November 62.5 June 30 December 30 What was the annual percentage yield (APY) earned on Anh's savings account? How does the Scrum Master help the Product Owner? Select the three most appropriate answers.Understanding product planning in an empirical environmentFinding techniques for effective Product Backlog managementFacilitating Scrum events as requested or neededIntroducing cutting edge development practices Give me three types of control systems since couples have begun cohabiting in large numbers, the positive relationship between cohabitation and divorce has Assume that interest rates on 30-year Treasury and corporate bonds with different ratings, all of which are non-callable, are as follows:Treasury bond: 7.72%Corporate bond (AA rating): 8.72%Corporate bond (A rating): 9.64%Corporate bond (BBB rating): 10.18% what do the numbers tell us about which immigrants congress quizlewtconsidered most and least desirable? why do you think no quotas were established for countries in the western hemisphere? absolute rulers from many cultures have claimed that their authority is a manifestation of the will of the gods (or god). but which, if any, of these artworks show rulers who derived their power specifically from a sun god? You have been asked to write an essay about the use of alternative medicine to treat cancer. Would this be a good thesis statement and supporting ideas for this essay? Thesis statement: Alternative medicine is a dangerous practice that robs cancer patients of time, money, and often, their lives. Supporting details: A Harvard study of records in the National Cancer Database showed that patients who choose alternative medicine over conventional therapies were two and half times more likely to dio within five years of diagnosis. Alternative treatments are less available within a community than conventional cancer care, so many patients have to travel long distances, and pay whatever providers wish to charge. Insurance rarely covers these expenses. Early detection and treatment is correlated with better outcomes. Patients who turn to alternative therapies first may miss the window of opportunity during which conventional medicine would have been effective. which association area in the human frontal lobe receives information from other association areas and uses this information to reason and plan actions? What is the total surface area of the figure shown? of the cartons produced by a company, 3% have a puncture, 6% have a smashed corner, and 1.4% have both a puncture and a smashed corner. find the probability that a randomly selected carton has a puncture or a smashed corner. Mack's Toy Shop made 600 trains yesterday and found that 30 were defective. Theyplan to make 4,500 trains this week.Using the information given, how many trains are expected to be defective?225 trains6,000 trains15 trains500 trains who is responsible for decisions about security strategy? it people shared: it leaders and business leaders business leaders consultants T/F the entry phase of interpersonal communication is guided by the implicit and explicit rules and norms that we have for conversations. marriott corporation: the cost of capital (abridged)how does marriott use its estimate of the cost of capital? does this make sense? write an analytical paragraph comparing and contrasting shia and sunni islam. your paragraph should explain what the two sects have in common, where they differ, and whether the similarities and differences are more inportant CR TRIFLES (AMERICAN LIT)what is one important theme in Trifles? How do symbols help develop that theme? Use evidence from the text support your answer. *for this you must use the R. A. C. E method. No shorter than 5 sentences. * Help Save Su Check my w 3A 4 percent decrease in the price of milk causes a 16 percent decrease in the quantity demanded of chocolate syrup. What is the cross-price elasticity of demand for chocolate syrup with respect to the price of milk? Instructions: Enter your response as a whole number. If you are entering a negative number, be sure to include a negative sign (-) Cross-price elasticity of demand equals .The two goods are complementa v because when the cross price elasticity of demand is a) negative, the two goods are complements b) negative, the two goods are substitutes, c) positive, the two goods are complements. d) positive, the two goods are substitutes T/F Name-calling is ethical in public speaking because it is protected by the First Amendment to the Constitution. 5. Consider the following MBS pass through with principal $300 million. The original mortgage pool has a WAM = 360 months (30 years) and a WAC = 7.00%. The pass through security pays a coupon equal to 6.5%. The PAC has an upper collar of 300% PSA and a lower collar of 85% PSA. (a) What is the price of each tranche? Assume a constant PSA = 150%. (b) Compute the effective duration of the two tranches assuming that the PSA increases to 200% if the term structure shifts down by 50 basis points, while it decreases to 120% if the term structure shifts up by 50 basis points. Which tranche is more sensitive to interest rate movements? Which tranche is less sensitive?